used OPTIMAL for sale

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). Large quantities available! The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). Large quantities available! The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). Large quantities available! The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual budget, we offer ...

Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 10 x 1/1 Gastronorm inserts in gas version, built in 2012. The device is tested, overhauled and fully functional in our in-house workshop. The RRP. for the device is € 11,950 net The price quoted is net plus 19% VAT. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back • Shipping or pick-up can be flexibly selected • Expert advice - before and after the purchase • Provision ...

Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among Elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all the machines in the range, the Elixa 35 is a compact stretch packaging machine designed by the Fabbri Group specifically for particularly small workspaces and retail outlets. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results when combined with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market, achieving unparalleled packaging aesthetics.  ...

Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

This is a CM (P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2019. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6-month warranty on electrica ...

Mobile center axle ramp, Butt, 11,80m long, 9 To., – Used - : Price from location: only 9.500.- € (net), incl. loading! Manafacture: Butt Type: BK912 Year of construction: 2009 Load capacity: 9.000kg Total length: 11,800 mm Total width: 2,300 mm Ride width: 1,960 mm Lip width: 2,140 mm Lip length: 400 mm Straight part platform (top): 2,500 mm Drive-over height: 1,100 - 1,750 mm Optimal movement of the ramp due to centrally arranged floating axle with low manoeuvring requirements Easy adjustment of the operating height via manual hydraulic pump Condition: good – very good Available: now Location: Friedrichshafen

The basic unit includes following modules (standard equipment): ï?  Compact and stable design in modular design ï?  All feeding systems that ensure an optimal product handling, are adaptable ï?  Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator ï?  Wear-free, infinitely adjustable, patented tension system ï?  Wear arm seal system by steel seal bars with more accurate Temperature monitoring ï?  Mechanical locking of the clamping bar, this precise slide clamp and sealing ï?  Product protection by security monitoring via light barriers in the Clamping range ï?  Switching and Pneumatics Cabinet integrated into the machine ï?  maintenance-free and oil-free operation Technical data: ï?  Control right ï?  Control Panel of Lauer PCS (standard)  ...

Exhibition machine Metal band saw on base. The machine is used professionally for smaller saw cuts. The saw blade tension can be adjusted by hand. Vise with quick-release option. No vibrations due to the heavy saw bar. The machine is equipped with a 2-stage motor, bearings for optimal saw blade guidance. The saw blade pressure is adjustable by means of a hydraulic cylinder. Technical description: Motor power 1.1 /0.59kW (2 stages) Sawing capacity 45° round 150 mm Sawing capacity 45° square 145 mm Sawing capacity 60° round 90 mm Sawing capacity 60° square 85 mm Sawing capacity 90° rectangular 260 x 110 mm Sawing capacity 90° round 220 mm Sawing capacity 90° square 220 mm Saw blade size 2460 x 27 x 0.9 mm Voltage 400 V Net weight 210 kg Execution: Machine stops automatically after the cutting process is completed With coolant device Quick-release v ...

Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all machines in the range, the Elixa 35 is a compact stretch packaging machine developed by the Fabbri Group specifically for particularly small workspaces and retail stores. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results in combination with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market and achieves unparalleled packaging aesthetics.  ...

Fully automatic bread slicer MHS Type: MHS IDEAL SB specifications: Round knife cutting bread slicer oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread gripper suitable for all types of bread with Bread rack for bagging with sight glass cover for optimal safety during the cutting process easy Cleaning without having to move the machine current model of MHS for further information please refer to the MHS website 230 volts / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg mobile on 4 deflection rollers with 2 brakes Year of construction: 2011 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call. Purchase price incl. current VAT. A proper invoice will be issued!

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...

Inject Star ES-1100 Vacuum Tumbler-Ref.8491D Brand: Inject Star Model: ES1100 Manufacture year: 2005 Volts (v): 3 220 / 380 V / 50 Hz Power : 2,2 kW Width: 1540 mm Height: 1800 mm Length: 2150 mm Weight: 750 Kg This machine is designed for massaging meat with and without bones, using a special baffle. The product is moved across the special baffle to provide efficient protein activation, and massaging in a rotating, sliding, and slipping movement. Drum volume: 1100 l Optimal loading: 500-700 kg Drum rotating speed: 1-11 turnovers per minute The system is driven by a frequency controlled motor via friction rollers. The container is emptied by rotating it to the left. Equipped with computer. Up to 99 production programs can be created and stored. The programmable parameters are: massaging speed, massaging duration, direction of rotation, processing time,  ...

For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Stainless steel pedestal for bread presses / dough-sharing machines suitable for all common bread presses massive construction resilient with 1 to easy lifting with the lift truck Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Visit our large bakery machinery warehouse!

NEW - 4 Trolley REXROTH R182153210 VAT compliant invoice will be issued. Data: Carriage carriage twill made of carbon steel CS Preload class C3: High preload Accuracy class SP: Super precision Replacement construction: Guide carriage and guide rails can be combined with each other in any accuracy. High torque load capacity Equally high load ratings in all four main load directions Maximum rigidity in all load directions due to additional screwing on two holes in the middle of the roller carriage Unlimited replacement construction Any combination of all guide rail designs with all roller carriage variants. Grease nipples possible on all sides, making them easy to maintain. Minimal lubrication quantities due to innovative duct design. Smooth, smooth running thanks to optimally designed deflection and guidance of the roller superstructures can be screwed to the roller carriage from ...

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...

This is a granulate dishwasher from the manufacturer Wexiödisk, type WD-100GR from the year of construction 2016. Wexiödisk granulate pot dishwashers clean all stainless steel kitchen utensils with water added to plastic grains. Even burnt-in grease can be removed quickly and easily. The dishes do not need to be soaked or scrubbed; only loose food residues are scraped off to avoid unnecessary contamination of the rinsing water. Thanks to the unique, double-door push-through system, the WD100GR differs from all other pot washers on the market; The dirt and clean sides are completely separated from each other. The scope of delivery includes the inlet table, the cassette trolley and two cassettes. The inlet table is equipped with a water faucet and a hose holder, so that a hand shower can be installed quickly and easily for pre-rinsing. The dishwasher has undergone a major predictive insp ...

Self-propelled 3-row top-lifting harvester DEWULF ZK III SE, Manufacturer: DEWULF Type ZK III SE Factory number 5913733, Year of production 2013, Engine: Deutz 238 kW, No batteries - mileage cannot be verified Visible signs of corrosion and oil leaks. Dewulf ZK lllSE is a self-propelled 3-row top lifting harvester with a spike unit and a discharge elevator (for harvesting, among others, carrots, parsley, red beet, celery). According to the information provided by the manufacturer, depending on the logistics used, it is possible to collect products from 4-5 hectares during the day, ensuring optimal conditions, resulting in a high-quality final product. After the vegetables pass through the cutting set, the product is transported further using a cross belt. There is a large spiked belt behind the conveyor belt, which ensures complete cleanliness of the product immediately after c ...

Code 4925 Description Surface grinding machine Make ELB Model OPTIMAL 1 VA II Serial No. 180730982 Year 1982 Tablesize 900 x 250 mm Table grinding size L x B x H 600 x 300 x 250 mm Magnetical plate size L x B 500 x 250 mm Speed table movement 1 – 25 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 500 mm Grinding stone dim. Stone x Wide x Taper 300 x 50 x Ø 75 mm Spindel power 3,7 and 4,5 kW Spindel speed 1400 and 2800 rpm Weight 3500 kgs Motor power 3,7 and 4,5 kW – 380 Volt Accessoiries Elec. Magneticplate 500 x 250 mm Coolant with paperfilter 2 x DRO Grinding stones, etc. Condition Machine is in good condition

Stock number 1105-02617 Machine type flat grinding machine Make Elf Type OPTIMALLY 4250 NC-K Built in 1993 Control type NC Storage warehouse Country of origin Germany Delivery time immediately Exhibition Hall, ver free freight basis Technical details Grinding length 450 mm Grinding width 250 mm Workpiece height 375 mm Table length 800 mm Table width 250 mm maximum work-piece weight 400 kg Autom. Cross feed adjustable 3-50 mm / stroke Vertical delivery, 1 Division 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel diameter 36 mm Voltage 380 V Grinding spindle motor 3.7 / 4.7 kW Total power demand 9 kW Machine weight approx. 2.6 t Space requirement of approx. 2800 X 2500 2300 mm Additional information automatic delivery -Electro magnetic clamping plate with straight fine pole pitch, dimens ...

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Code: 0200 Brand: PAMMINGER - AUSTRIA Model: T-AGGREGAT High-performance automatic vertical strapping machine for strapping pallets, panels, composite materials, various materials, etc - Year 2018 - CE Standard Max workable width 2100 mm Max workable length 5600 mm Max workable height 600 mm The upper arrangement of the strapping aggregate and therefore resulting flexibility in width and height of both the machine and the packing piece which has to be processed ensures variable operation of the machine 2 column machine frame made of bent and welded sheet metal Clearance adjustable support rollers ensure a smooth running of the support along the machine columns The movement of the lifting unit including the sealing unit and the strap guiding frame is utilized with an endless toothed belt and an electric gear motor with brake Vertical slide and aggregate support for the s ...

For sale is an AvK DIG 140 i/4 generator, which bears the serial number 84 27519 A101. This model was originally paired with a Jenbacher 620 engine with the design number B227. The generator is characterized by its high power of 3400 kVA, which is generated at an output voltage of 10,000 V and a frequency of 50 Hz. This model was manufactured in 2005 and has clocked up 75,000 hours since then. An important aspect to keep in mind is that this generator has been completely overhauled, including Unitrol. This ensures that it is still in optimal condition despite its intensive use. The price of this generator is 29,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us

Cable recycling plant with many innovations in all plant components for up to 600 kg/hour (depending on material) The basis of this recycling plant is modularly constructed from strong and innovative individual components. In the standard version, the following structure is obtained. - Preshredder MR 4080 or MR 40-100 - Conveyor belt with magnetic separator - controlled by PLC - Granulator C 600 with axle length 600 mm, 5 rotor blades and 37 kW drive, cooling of the housing by unit against adhesions - Z-separator for the separation of heavy copper or 1 granulate - Dosing drum for the optimally uniform feeding of the following turbine mill - Ghibli 545 turbine mill (new model), optionally with coolable housing and inverter control - SA 600 separation table, new version with PLC inverter control of the air volume + eccentric drive with inverter control of the oscillation + adju ...

MIWE AERO e+ convection oven 4.0604/4.0604 Baker condition! Year 2010 is a powerful electric oven with a total power of 17 kW. Made in Germany and by the well-known brand MIWE, this oven is the perfect choice for bakeries and other catering establishments. With dimensions of 90/85/210, this oven is compact yet spacious enough for a variety of baked goods. The MIWE AERO convection oven is a reliable and efficient appliance that will optimally meet your baking needs.

hood type dishwasher Hobart AUXXLR-11N This used hood type dishwasher from Hobart was made in Germany in 2013 and is perfect for use in the catering industry. The AUXXLR-11N model offers efficient cleaning of crockery and cutlery and is equipped with numerous functions. Only one dishwashing basket is included and the dishwasher is in good condition. With this Hobart hood type dishwasher, you can optimally equip your scullery and work effectively. Condition: see original pictures Decorative items are not included in the scope of services. The device is fully functional. Viewing and test run is possible at any time in Gochsheim. Dispatch: Within Germany 2-4 working days Within the EU(European Union) 2-8 business days Pick-up: Gochsheim warehouse. Opening hours: Monday to Saturday from 8am to 6pm Contacts for personal arrangements: Mr. Avanesyan +49 176 ...

Alexanderwerk ERGO BEAR AE60/VL3 Stirring, whipping and kneading machine Varimixer YOC 2006 Alexanderwerk ERGO BEAR 60 liters YOC 2006 Ergonomic working > boiler Lifting and lowering at the touch of a button Removable protective shield and boiler scraper Productive kneading and kneading machine for protessional salting ERGO BEAR stands for ergonomically optimal machine conditions • Raised machine body • The boiler is run up and down through a litt AW ERGO BEAR 60l with stainless steel protective shield. Notstooo. Controlbanee Touch-Screer Top ConditionCondition: see original pictures Decorative items are not included in the scope of services. The device is fully functional. Viewing and test run is possible at any time in Gochsheim. Dispatch: Within Germany 2-4 working days Within the EU(European Union) 2-8 business days Pick-up: Gochsheim warehouse.  ...

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

We sell here the Robot Coupe Blixer 45 A, 45 L, as can be seen in the pictures, with the accessories shown. This device gives you two features in one! : The Blixer combines the features of two well-known devices in one - that of a cutter and that of an emulsifier-mixer device. It makes it possible to mix all kinds of raw and cooked foods into liquid, semi-liquid or pulpy end products Efficient: Thanks to its large liquid capacity and its lid with wiper and sealing ring, this appliance allows you to prepare all kinds of mixed food and even tube feeding. Reliable: Knife with patented new blade profile for optimal cutting quality. Regular cutting and guarantees perfectly uniform processing even with the smallest quantities. This device is equipped with 2 blades as standard, but can be optionally extended to three blades. The third blade can be ordered for an extra charge. Due to th ...

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

NuAire NU-8700 CO2 Double Chamber Incubator • Two independently controlled chambers  • Precise temperature stability and precise CO2 and humidity controls  • 100% stainless steel chamber construction • Water jacket with large capacity 75.7 liters • Contacts for remote alarm output • Easy-to-maintain sterile environment with HEPA filtration  The NuAire NU8700 CO2 Dual Chamber Incubator features two precise temperature-controlled chambers with HEPA filtration  for the optimal storage of embryos, gametes and animal tissue.  The microcomputer-based control system independently monitors and controls the temperature,  humidity and CO2 levels in each chamber.  The large water jacket is an ideal heat sink for precise temperature control of +/- 0.2 °C at 37 °C.   The chamber temperature ranges are between 5 °C above ambient temperature and 55 °C.  CO2 can b ...

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

We always have convection chamber furnaces on offer. Give us a call! Very good condition, 12 months warranty -free-standing, on base -Temperature max.: 450 °C -Volume of furnace chamber: 250 liters -Exterior: 1002+225 x 1636 x 1860 mm(W x D x H) -Furnace chamber: 600 x 750 x 600 mm (W x D x H) -Controller C280, 9 programs each with 4 segments -Temperature uniformity: ± 6°C according to DIN 17052-1 -strong air circulation, air guide box for optimal air flow -Supply and exhaust air flap manual -Connection flange for supply air fan under furnace -Permissible batch weight: 125 kg with distributed load per rack -1 bottom plate incl. -2 slide-in plates additionally available on request -Connected load: max 13 KW -3phase -Documentation -Weight 610 kg Viewing in our warehouse by appointment.

Product name: Feeder VSA 2048L Manufacturer: Holzkraft Item number: 5119048 Condition: Brand new Technical details: • max. projection: 1050 mm • Number of PU feed rollers: 4 • Roll diameter: 120 mm • Roll width: 60 mm • Wheel travel: 20 mm • 2-speed transmission • 8 x speeds: 2/4/5.5/6.5/11/13/16.5/33 m/min • Motor power 50 HZ: 0.75 kW • Voltage: 400 V • Weight: 73.5 kg (incl. tripod) • Right-left rotation • Individual adjustment options in vertical and horizontal position for optimal feed •Metal casing • without counter for height adjustment • Dimensions (L x W x H): 1,665 x 220 x 540 mm Price: €1,090.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!)  ...

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Waste Baler BTS-MF100 The BTS-MF100 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials user receives a high volume reduction up to 90% and also waste disposal cost savings. The baler impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Solid bales with bale weight up to 100 kg - Suitable for baling of cardboard, film, clothes and many materials more - Powerful cylinder for optimal material compaction - Retaining Claws to reduce material spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 6 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2371 x 1388 x 1046 mm Transportation ...

--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + S5-RoboMIG XT - Collaborative MIG-MAG welding - Welding machine: S5 RoboMIG XT Cobot - Incl. FullProcess: All Lorch SpeedProcesses included SAY GOODBYE TO SKILLS SHORTAGES, COST PRESSURES AND TECHNOLOGICAL GAPS With Lorch Cobot Welding Solutions, you can relieve your employees and increase productivity and profitability by optimizing the use of your human resources. Reduce waste, rework, and costs with consistent performance and reproducible results of the highest quality. Stay future-proof and position yourself as an attractive employer for young, tech-savvy talents with this practical step towards Industry 4.0. REPRODUCIBLE PERFECT ...

This is a CM(P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2018. The device has undergone an extensive inspection in our in-house workshop and is fully functional. Specifications: • W x D x H: approx. 847 x 776 x 782 mm • Power supply: 400 V / kW: 11.0 / 50-60 Hz • Capacity: 5x1/1 GN • Weight: approx. 103 kg • Serial number: E61MI18072681386 • Year of construction: 2018 Used, fully functional. 6-month warranty on electrical parts. Warranty condition: Please note that devices with a three-phase connection (400V), water connection and/or gas-powered devices may only be connected by a specialist company certified by the manufacturer! Only the submission of the commissioning protocol entitles the holder to warranty claims The price quoted is net plus 19% VAT. Service: We are happy to advise you on all types of device ...