used PM for sale

Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40  ...

Inv. Num. : 7588 Type: 1600 KLIMA Producer: NESSAP Created: 2006 Parameters: Work table length: 6000 mm Work table width: 1500 mm Equipment: Coil Sheet Unwinder Roller stand

Panel Saw Striebig Type: 6220 A Cutting length 5300 mm Cutting height vertical 2200 mm Cutting height horizontal 2100 mm Cutting depth maximum 80 mm Saw blade diameter maximum 300 mm Saw blade diameter minimum 290 mm Saw blade speed 4,750 rpm. Motor power 4.4/5.5 kW Evasive slatted frame Support rollers with locking mechanism Moving extraction duct Weight: 950 kg Dimensions Length 6300 mm x Width 1235 mm x Total height 2720 mm Room height 2860 mm

Warranty 12 months - T max 250°C - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1765 x D 1425 x H 2300 mm - with controller KS40 from PMA (TARGET/ACTUAL CONTROLLER) this is not a program controller! - Installation of new Jumo Dicon Touch controllers possible on request - Inlet rails, for feeding the furnace with a loading rack - Exhaust fan - Supply air filter - Heating capacity 17.4 KW - Weight: 760 kg -Documentation We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. We have new and used convection ovens. Get in touch with us!

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available With safety system for solvent-based substances according to DIN 1539 -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Capacity 1500 liters -Tmax 260°C -Controller P570/ 50 programs each 40 segments freely programmable -NtLog for controller recording the data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connected load 39 KW -Weight 1150 kg -incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment.

Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 KW -Net weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

HDP 364, in container, Operating pressure: 2050 bar, Flow rate 81 lpm, engine: CAT Diesel 330 kW, ready for action

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...

Stationary block machine SUMAB R-500 – automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated). Working pallet dimension: 1400 x 700 mm. Useful area Max.: 1250 x 650 mm. With stationary block making machine Sumab R-500 following concrete products are produced on efficient way: hollow blocks, insulated blocks, paving stones, curbstones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm) For more information, please send a request.

Used lathe Internal machine number m3536 Manufacturer: Weiler Type DA 210/1000 Year of construction 2003 Ma.Number 710 Center width 1,000 mm Tip height 210 mm Spindle bore 52 mm Speeds 44 to 2,000 rpm. Total weight approx. 1,800 kg With digital display With approx. 20 interchangeable holders With complete instructions Item location: 59425 Unna The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The ...

Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...

Alzmetall AB 6/S MK5 - High-performance column drilling machine - Stepless speed adjustment - Integrated clockwise/counterclockwise rotation - Few operating hours Accessories: - Machine vise: span 340 mm, jaws 200 x 60 mm - 2 clamping tools - 18 HSS drills MK4: 32, 34, 35, 36, 37,38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50 mm - 5 HSS drills MK5: 55, 60, 65, 70, 75 mm Specification - Drilling capacity: 70 mm - Quill stroke: 240 mm - Spindle mount: MK5 - Spindle speed: 30 - 1200 rpm (infinitely variable) - Gear stages: 8 - Max. distance spindle/table: 860 mm - Max. distance spindle/base plate: 1300 mm - Projection: 360 mm - Drilling table size: 890 x 675 mm - Table clamping surface: 730 x 540 mm - Clamping area bottom plate: 800 x 815 mm - Column diameter: 270 mm - Motor power: 4.0 / 5.5 kW - Voltage: 400 V - Dimensions WxHxD: approx. 890 x 2350 x 1800  ...

Horizontal packaging machine Doypack - VF 180 DYP Made of steel profiles according to all standards in food packaging Speed: up to 40 bpm Bag width: 90-180 mm Bag height: 110-260 mm Volume: up to 1000 ml Dimensions: 6000 x 1100 x 1500 mm (L x W x H) Weight: 2000 kg Power supply: 380 V, 50 Hz, 8 kW Compressed air pressure: 6 Bar

Multihead weigher - Multipak 24 3x8 plus Memory bucket for mixed product All stainless steel Up to 150 wpm IP65

Equipment: - Extinguishing device with drop flap and oxygen deprivation - IE5 high-efficiency reluctance motor with FU control - 7" color touch panel -Auto. Start-stop control for up to 8 woodworking machines - H3 tested - Suction nozzle on the front left, center - JET filter regeneration - 3 dust bins, each 0.16 m³, for chip bags, with swivel castors and viewing window Specifications: - Nominal volume flow: 8,647 m³/h - Nominal volume flow vacuum: 3,293 Pa - Suction side connection Ø: 350 mm - Filter area 38.0 m² - Filter regeneration autom. by compressed air, compressed air consumption per cycle 560 Nltr. - Operating mode: Continuous operation - Type of current: 400 V / 50 Hz - Motor power: 11 kW - Nominal speed: 3,000 rpm - Rated current: 24.5 A - Fan/Drive: IE5, FU-controlled, high-efficiency reluctance motor - Noise level according to EN11201: 72-74 dB(A ...

Machine Details Stock-No. 1105-04013 Type of machine CNC Lathe - Inclined Bed Type Make DOOSAN DAEWOO Type PUMA 280 Mb Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin KOREA Delivery time on inquiry Freight basis ex work Technical details turning diameter 410 mm turning length 600 mm control FANUC O ITC Bore diameter 90 mm number of spindle speeds 45-3500 rpm Turret 12 SPEED diameter of quill 80 mm spindle head ASA - A 2 - 6 forward bearing diameter 100 mm Tailstock Quill Diameter 80 mm Center Bore MT - 5 Quill Travel 100 mm Axial Power 12 , 5 - 500 kgf Turret JAPNER x 12 Drive tool 6 Number of tools max. 12 total power requirement 36 kVA weight of the machine approx. 6.5 t Additional information FANUC serie i ot C AXIS MOWING TOOLS cip convoyer TOOLEYES VERY NICE

Sliding table saw Altendorf F45 Elmo 3 Heavy precision sliding table saw Auto. Sawing unit adjustment high-low swivel / DIGITAL Car. Scoring unit - autom. Adjustment high-low-sideways Motor 5.5 kW 3000/4000/5000/6000 rpm Saw blade tiltable 0 - 45° Saw blade diameter up to 450 mm Trimming length 3000 mm CNC controlled width stop 1050mm DIGITAL Reading width stop DIGITAL Swivelling control panel above table precise. DIGITAL cut-to-length stop Additional universal mitre stop A97 SWISS PATENT Machine from a craftsman's workshop Machine is in TOP CONDITION from stock Lieboch

Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15

Hydraulic Pump Motor Spare Parts Carrier Power 3KW 1425 rpm. Weight approx. 25 kg For the performance data, please refer to the nameplate Price on request

TRUMPF TruLaser 3030 laser cutting machine built in Germany in 2007 provides excellent laser cutting quality while maintaining low operating costs. Designed for even the most demanding challenges, the machine machines workpieces with a maximum thickness of 12 mm with high precision and quality, making it suitable for any production facility. The stable 2 kW laser beam used during cutting produces very smooth and even edges along the entire length of the workpiece, regardless of the type of material. To further improve the workflow and reduce machine downtime to a minimum, the work table is equipped with an integrated automatic pallet changing system which allows workpieces to be loaded and unloaded simultaneously during the cutting process. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - laser power: 2 kW (2 ...

TRUMPF TruLaser 3030 laser manufactured in 2007 in Germany, is the best choice for any production facility. This reliable and highly efficient machine provides excellent laser cutting quality while maintaining low operating costs, thanks to the use of a reliable laser source with the highest energy efficiency. The stable 2 kW laser beam makes the workpiece edges extremely smooth and even after machining. Machining is performed on a high-quality work table with an integrated automatic pallet changing system. This system allows simultaneous loading and unloading of workpieces during the cutting process, resulting in increased production efficiency and significantly reduced machine downtime. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - laser power: 2 kW (2000 W) - feed rate in the X/Y/Z axis: 3104/ ...

Hobart A 200 Planetary Stirrer 3 speed full gearbox 1st gear 107 rpm 2nd gear 198 rpm 3rd gear 361 rpm Boiler capacity 20 l Very good operational condition, directly from production!

Perlmühle Drais PM 1 RL-V Explosion protected version Grinding tank 1.3 l Agitator power 2.5 kW with feed pump Revision in 2005 Very good condition, straight from production!

Perlmühle Drais PM 5 RL-V Explosion protected version Grinding tank 6 l Agitator power 7.5 kW with feed pump Very good condition, straight from production!

Perlmühle Drais PM 25 RL-V Explosion protected version Grinding tank 26 l Agitator power 24 kW with feed pump Very good condition, straight from production!

Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type

Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

For sale is a whole heating system installed in the container, all ready with custom-made chimney. Technical inspection was carried out by Dekra. The heater has only 16 hours of operation behind it, so it's almost like new. Incl. Weihaupt light oil burner, incl. heating oil tank, 5t incl. fireplace system, incl. mixed cooler, incl. condensate management for steam generators up to 1bar, incl. Additional equipment: condensate tank, incl. pipe separator + backwash protection filter + Single water softener VAD 25, incl. Dosing station and accessories, incl. Insulated sheet steel container Can be visited in Mölln. Technical data can be found in the pictures. Sale only to self-collectors, if you have any questions, please contact us.

Code: 0309 Brand: COLOMBO - ITALY Model: AT 180 - CE Standard 2-shaft tenoning machine for wooden frames, windows, doors and various - CE Standard Technical data: Sturdy machine body Hardened and ground steel sliding table slideway The tenoning table slides linearly by menas of balls fitted on dustproof runners Vertical and horizontal tool adjustment with an easy to read numeric decimal display Working unit protection cabin Composition: Saw unit: Motor Kw 3 - Blade diameter mm 400 F30 - Blade speed 3000 rpm - Blade horizontal movement mm 120 - Max working height mm 105 - Dust outlet diameter mm 80 Tenoning spindle : Spindle diameter mm 40 - Useful spindle length mm 170 - Rotation speed rpm 3100 - Motor power Kw 7,5 - Max tool diameter mm 320 - Suction mouth diameter mm 150 Tenoning carriage: Table dimensions mm 500 x 900 - Manual feed - Pneumatic clamping of workpie ...

We sell here the Robot Coupe Blixer 60, 60 L, as you can see in the pictures, with the accessories shown. This device gives you two features in one device! : The Blixer combines the characteristics of two well-known appliances in one - that of a cutter and that of an emulsifier-blender appliance. It allows you to mix all kinds of raw and cooked foods into liquid, semi-liquid or mushy end products Efficient: Thanks to its large capacity for liquids and its lid with scraper and sealing ring, this device allows you to prepare all kinds of mixed food and even tube feeding. Reliable: Knife with patented new blade profile for optimal cutting quality. Regular cutting and guarantees completely uniform processing even with the smallest quantities. Due to the high number of place settings (300-3000), the Blixer 60 can be used perfectly in clinics, retirement homes, daycare centers and of  ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Emergency stop push button - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels rene ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels renewed - Glass scales overhaule ...

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan

Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA - Power supply: 3x 400 V - Dimensions WxHxD: 2100 x 1410 x 2600 mm - Weight: 1250 kg

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

ZMM CU 502 - Universal lathe - Center height: 250mm - Distance between centers: 1500 mm - Swivel Ø above the bed: 500 mm - Swivel Ø above the carriage: 240 mm - Spindle bore: 72 mm - Spindle speed: 16 - 2000 rpm (18 steps) - Engine power: 10 kW - Operating voltage: 400 V / 15 - 25 A - Dimensions WxHxD: 3100 x 1400x x 1250 mm - Weight: approx. 3120 kg

Maho MH 500 W3 - CNC tool milling machine - Maho CNC 332 CNC control - new LCD display - incl. instruction manual & documents - Built in 1989 Specification Workspace: - X-axis: 500 mm - Y-axis: 380 mm - Z-axis: 350 mm Workroom: - Clamping surface: 254 x 354 mm - Number of guide grooves: 1 Working spindle: - Tool holder: ISO40 - Quill stroke: 50 mm Speeds & Feeds: - Working spindle speeds infinitely variable: 20 - 5000 rpm - Feed range X, Y & Z axes: 1 - 2000 mm/min Rapid traverse: - X & Z axes: 4 m/min - Y-axis: 2 m/min Electrical equipment: - Voltage: 400 V - Total connected load: 19 kVA CNC Control: - Resolution of linear displacement measuring systems: 0.001 mm - Readings: Screen - Number of axes controlled at the same time: 2 - Number of sequentially controlled axes: 3 Weight & Space Requirements: - Dimensions WxHxD: 2235 x 1943 x 2375 mm - Weigh ...

- Siemens Sinumerik control - Chip conveyors - Coolant system - Built in 2002 Technical data - Circulation diameter: 235 mm Sledge path: - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - • in the front bearing: 90 mm - Spindle head with short cone DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated into the spindle box - Rated power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Rated speed: 1400 rpm - Maximum speed: 6500 rpm - Travel speed Z-axis: max. 30 m/min - Travel speed X-axis: max. 60 m/min

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

ZIEGLER C41-20A - air forging hammer Hammer weight: 20 kg Strokes: 270/min Lifting height: 200 mm Projection: 180 mm Cylinder diameter: 115 mm Hammermasse: 90 x 50 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 460 x 1110 x 820 mm Weight: 380 kg Equipment: Hand - and foot operation, integrated Ambos Base optional

Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...