used SSI for sale

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

We have a filling machine from Tetra Pak for sale. It has been running 2cl oatmilk Tetra Classic packages. Spare parts, a nice carton erector from 2018, marking equipment and some conveyor belts are also included in the sale.

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

DÜRR 304kW Eco+Energy ORC 300 HT module for Waste Heat Electricity Generation. Make and model: DÜRR Eco+Energy ORC 300 HT module Capacity: 304kW Hours: 0 Year: 2017 Module designed to run from the waste heat of a gas engine. New unused plant ready to operate. Heat Source: Gas Engine / Exhaust gas Admission temperature: 424°C No Usable heat: (3 605 kWth/ Genset) 1,815 kWth The ORC process is a thermodynamic cycle which uses thermal energy to generate electricity. Thermal oil as a heat source is led through the evaporator of the ORC module. The vapor of the working fluid flows under pressure into a turbo-generator sector, where some of the heat energy is converted into electricity. Subsequently, the working fluid is being liquefied in a water-cooled condenser, and again fed to the evaporator with a multi-stage feed pump. The condenser is executed as a double stage u ...

22.9 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 17.1.1

Kortho Graphicjet X-18 Inkjet Printer  High-resolution inkjet printer for absorbent and smooth surfaces The most advanced Hi-Res inkjet for 18mm high prints Launched in 2015, the X-Series Graphicjets are Kortho's newest and most advanced Hi-Res inkjet printers. In terms of mechanical engineering, the X-Series printers with their capillary ink system are a further development of our proven 18P. However, the X-series printers have a Windows operating system. In addition, its Nicelabel Windows driver makes it possible for this printer to print directly from any Windows software or ERP system. The X-Series features an 8" color touchscreen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. In addition, this printer can print at a speed of up to 60 meters per minute, up to 120 m/min at lower r ...

Width 110 cm 2 sanding belts You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 32.4.9.

You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.2.2

Planing height 330 mm Working width 510 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 17.3.1

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)

Horizontal boring mill, milling and machining centre, CNC controlled Drilling machine with 4 axes, table ( B-axis ) rotatable for positioning, NOT during the working process ) Manufacturer TOS- Varnsdorf Type WHQ 13 CNC ( WHN 13 CNC with changer ) Built in 1993 Control Heidenhain TNC 355 6 DIN A4 folders with machine documents are available, including foundation plans - from location 73453 Abtsgmünd, approx. 60 km from Stuttgart. The buyer is responsible for dismantling / spreading from the hall and loading at the latest about 14 days after the end of the auction, the machine must be dismantled and removed from the hall Forklifts with 1.0 and 2.5 tons lifting capacity can be used free of charge, as can indoor cranes with a lifting capacity of 5 tons Data ( all information WITHOUT guarantee ): Driveways: X 3,500 mm Y 2,000 mm ( HEIGHT adjustment ! ) Z 1,250 mm ( spindle  ...

Impression work - Numbering ink to number for Heidelberger Speedmaster SM52 - Printmaster PM52 - very well maintained and little used - Built: 2002 - Colour box with colour rollers - Numbering wave - with 2 seat rings - with 2 - switching arms - with 10 numbering works

Classifieds Home & Garden DIY Your Ad Visits: 17 Wishlist: 0 Ends on: 26.05.2024 Edit Reserve Lengthen Delete Print a sales sign Highlight Ad Duration Price Push up Get new attention! Your ad will look like a new ad. one-time 3,95 € Highlight: Up to 2x more visibility! Your ad will be highlighted in color. 7 days 4,95 € Up to 5x more visibility! Your ad will be pushed up every day for a week. 7 days € 16.95 Up to 10x more visibility! Your ad is at the top of the list! 7 days € 19.95 Gallery: Up to 15x more visibility! Your ad will appear on the home page! 10 days € 49.95 All prices incl. VAT. Swivel Spindle Milling Machine FELDER F38 Rotary Milling Machine Table Milling Machine Feed in Langenbach Swivel Spindle Milling Machine FELDER F38 Swivel Milling Machine Table Milling Machine Feed €5,652 Pick-up only 85416 Bavaria  ...

8-axis welding robot with positioner (synchronous in 3 axes movable welding table) Manufacturer: OTC DAIHEN Europe GmbH Year of construction / first commissioning 2019 current NEW price approx. 180.000.- plus VAT was in use until the first week of May 2024 can be viewed and tested in assembled condition! EC declaration of conformity and operating instructions available from location 73453 Abtsgmünd, approx. 60 km east of Stuttgart The buyer is responsible for dismantling / spreading from the hall and loading no later than 14 days after the end of the auction, the system must be dismantled and removed Forklift trucks with 1.0 and 2.5 ton lifting capacity as well as the 5-ton indoor crane can be used free of charge Roborterarm / Manipulator: OTC Daihen FD-B6L ( NB6L1-CEFC ) from year 10 / 2018 Net weight 285 kg Sole load (burner) approx. 6 kg Pan ranges / ranges see pho ...

Motor 11 kW Transport engine 4 kW Vibromotor You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Motor 7.5 kW Transport engine 4 kW Vibromotor You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.1.2.

You can call or write to us. We can speak and write German and Russian. You can also send messages in English 5.1.3

Double mitre stop for Altendorf Stop rail with two stop flaps You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.7.1.

Min. working width 60 mm Min. working length 140 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 19.1.1.

Can be cut in one operation combined with slitting, milling and cutting to length. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 10.1.1

adjustable ruler You can call or write to us. We can speak and write German and Russian. You can also send messages in English 12.7.1

REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2 and 4 sides 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm - connector diameters 4 x 160mm / 2 x 80 mm Transport ...

Dough part and knitting machine Bun press Erika Record Automat 30pcs Part head NEW revised Stainless Steel Knife NEW Dough insert up to 3600g (30-120g) depending on the vet with 3 new knitting plates Easy to clean with effective shutdown (pressing/cutting only) DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled 6 Months Warranty + Service Package Option: Stainless steel pedestal Maintenance contract TOP roll presses are waiting for you in our machine warehouse!

Deck Oven Electric Oven Miwe 1919 Condo Type: CO 2.0608 FP Control Bottom heat and top heat adjustable 2 baking shelves 600 x 800 all stoves with steam bottom with wood absen Upper hood Chassis mobile with brake Stove height 200 mm Connection 400V, 11.8kW, 2 x 16A-CEE plugs Water connection 3/4 inch, water drain DN 40 Dimensions: 1100 x 1400 x 2400 mm, WxDxH Used oven cleaned with 6 months warranty + service package Option: Water Reducer Maintenance contract More ovens in stock!

The machine consists of units. And it has the following features: 1. Branches – Drill a hole 2. Pin milling 3. Glue injection 4. Driving in the pin Process time only approx. 3 sec/cycle You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.3.5

The machine consists of two units. And it has the following features: 1. Branches – Drill a hole 2. Pin milling 3. Glue injection 4. Driving in the pin Process time only approx. 3 sec/cycle You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.3.4

The machine consists of two units. And it has the following features: 1. Branches – Drill a hole 2. Pin milling 3. Glue injection 4. Driving in the pin Process time only approx. 3 sec/cycle You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.3.4

Working dimensions 250 cm x 130 cm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 31.3.1

Panel dimensions 2.2x1.1 m Electric surface heating The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock. 31.3.4

with 4 rotating brushes You can call or write to us. We can speak and write German and Russian. You can also send messages in English

20 copy cells You can purchase the cutter together with the forming press. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock.

The working width of the shafts is 1400 mm The shafts are heated with grease - Device COREMA TM/OH - 2036 S UL You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.2.3

Collin Heating Press for Forming Plastics and Rubber Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites / Rubber / Ceramic Compounds Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

wei saws You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.8.1

otor 18,5 W Metal impeller You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 2.2.3

5.5 kW 60 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 31.1.1

Dimensions and weights Length approx. 2200 mm Width/depth approx. 1330 mm Height approx. 1300 mm Weight approx. 362 kg Dressing Dressing table width 260 mm Dressing table length 1120 mm Chip removal max. 4 mm Suction connection Extraction nozzle diameter milling machine 100 mm Suction nozzle diameter saw blade guard 30 mm Suction nozzle diameter thickness 100 mm Thickness Table length 545 mm Table width 258 mm Working height min. 5 mm Working height max. 225 mm Chip removal max. 4 mm Electrical Data Saw input power 2.2 kW Input power planer 2.2 kW Input power table milling machine 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Milling spindle Mandrel diameter 30 mm Effective length 105 mm Height adjustment 110 mm Speed(s) 1400/4000/6000/9000 rpm(s) Milling tool diameter max. non-lowerable 160 mm Noise emission Sound pressure level no-load 80 dB(A)  ...

Maximum saw diameter 350 3 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.3.2.

Motor 220 - 240 V 1.6 kW Bwlgrmdrws Cutting height approx. 85 mm Blade diameter approx. 300 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.4.1

Meiko EcoStar 545 D hood type dishwasher Excellent cleaning qualities CrNi washing and rinsing systems from above and below Digital temperature displays for wash and rinse water Eco-Filter Caustic Cleaning/Tank Regeneration Tank Cover Screens (CrNi) Temperature-dependent washing time extension Integrated rinse aid dosing device Simplest operation and optimal ergonomics Fully electronic program sequence with clear operating display Digital temperature display for washing and rinsing temperatures. Most convenient operation thanks to all-round brackets made of CrNi. Automatic hood start – only conscious pressing causes the program to start Self-cleaning program Lowest operating costs Effective rinse system with only 3 l per rinse cycle Double-walled insulated hood as standard Trailed wash tank with a tank capacity of only 22 l Above-average capacity Three prog ...

Gemac mezzanine floor / platform (1m² = 119.77 €) Top condition, looks like new. Dismantling and transport is to be carried out by the buyer. We can also do this for an extra charge. The shelving system is not included in the scope of delivery, but can be purchased with it. Location: 35043 Marburg The Gemac mezzanine floor / pedestal offers an efficient solution for maximizing storage space in industrial or warehouse environments. With its robust materials and well thought-out constructions, it enables easy and safe use in various applications. Manufactured by Gemac, a renowned name in the warehouse and industrial equipment industry, this mezzanine/pedestal is designed to meet the specific needs of your facility. The exact dimensions will be available soon, but it offers an impressive floor area of about 450 square meters, which provides ample space for storing a variety  ...

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Used spiral mixer DIOSNA, type: SP 80 D -refurbished- (picture before overhaul) The general overhaul will be carried out after order confirmation and will take about 2-3 weeks. - for 80 kg of dough or 50 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - Condition: Very good, as good as new - 6 months warranty A video of the machine in operation can be made on request. The mixer is in very good condition, as good as new and is ready for immediate use. Viewing and test run are possible by arrangement.

Used spiral mixer DIOSNA, type: SP 24 F -in very good condition- - Kneader suitable for up to 24 kg of dough - with digital control -mobile -El. Connection: 400 V, 3ph, 50 Hz, 5 A, 2.2 kW - Condition: Very good, ready for immediate use Inspection and test run are of course possible by arrangement.

Spiral mixer DIOSNA, type: SP 24 -refurbished- - everything renewed - Kneader suitable for up to 24 kg of dough - with timer - 2 speeds -mobile -El. Connection: 380 V, 3ph, 50 Hz, 6 A - Condition: Very good, ready for immediate use - incl. 6 months warranty Inspection and test run are of course possible by arrangement.

Used spiral mixer DIOSNA, type: SP 80 D -refurbished- - for 80 kg of dough or 50 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 time clocks - 2 speeds - 1 reverse gear - Emergency stop switch -El. Connection: 400 V, 3PH, 50 Hz, 12.0 A - Condition: Very good - 6 months warranty A video of the machine in operation can be made on request. The mixer is in very good condition, as good as new and is ready for immediate use. Viewing and test run are possible by arrangement.

Dough press EBERHARDT, type: Optimat size 4 - Size 4 - 30 troughs - Weight range 40 - 135g - incl. 1 new knitting plate The machine is in very good condition and is ready for immediate use. Viewing and test run are possible by arrangement.

Used dough sheeter FRITSCH; Type: Rollfix 70/650 E NU -In bakery condition- - automatic flour spreader - automatic coiler on the left side - storable programs - multiple levels of reduction - freely programmable curve settings - LCD display - Condition: Good, in bakery condition -El. Connection: 3x 400 V, 50 Hz, 3 Ph, 11 A, 1.8 kW - Belt width: 650 mm The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.