used SSI for sale

2 units available / single purchase possible TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2670.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 40 m flow rate: approx. 90 l/s Nominal data: 18.0 kW / 32.0 A Voltage: 400 V / 3 phases Start type: Star triangle Pressure connection: F-Storz Motor protection plug: free cable end Water protection class: IP68 diving depth: 20 m Weight: 141 kg Height: 955 mm Diameter: 395 mm Screen opening: 12 mm

TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining Bagger / Tieflöffelbagger Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Flow rate: up to 1,000 t/h Operating hours: approx. 10,000 h Engine: Liebherr V12 diesel engine, 565 kW / 1757 hp at (1,800 rpm) Displacement: 24.24 l Emission stage: EU Stage 2 / Tier 2 Hydraulics: 4 x Liebherr hydraulic pumps (total flow rate 2171 l/min) SPECIFIC COMMENT - 1133 undercarriage track 4.230 mm, wheel 5.2OO mm - Chains LH 1562; 2-web bottom plates 6OO mm - Monoblock boom 7.80 m with lifting cylinder - Bucket handle sealed 3.40 m with tilting cylinder TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining excavator / Backhoe excavator Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Operating hours: approx. 10,000 h Output: up to 1,0 ...

TECHNICAL INFORMATION Manufacturer: AMMANN Name: Two-shaft continuous mixer Type: AMIX2_4CB Built: 2010 Continuous power: 180 cbm/h Gross volume: 4.12 cbm Net volume: 3.71 cbm Filling level: 0.64 Drive power: 2 x 45 kW Length inside: 2,400 mm Inside width: 1.910 mm Stirring circle diameter: 1,080 mm Axle spacing: 830 mm Weight: 7.700 kg Drive type: V-belts and synchronous transmissions SPECIFIC COMMENT - Mixing trough with electro-pneumatically actuated outlet valve (300 x 650 mm) - Stirring arms with honeycomb blades and screwed agitator arm protection - Automatic central lubrication unit with grease flow monitoring - Mixer camera - Little operating hours and wear - Plant is dismantled and cleaned If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis

TECHNICAL SPECIFICATIONS Manufacturer: SMT STICHWEH Description: Drainage bucket wheel Design: Cup wheel in the middle Type: ES 40 BB Year of construction: 1983 Tub length: 3,375 mm + plus spout 490 mm Tub height: 1,150 mm Tub width: 4,080 mm Transmission: Stiebel Parallel shaft gearbox 5042 Dimensions screen mat: 700 x 740 x 8 mm Weight: approx. 5,500 kg SPECIFIC COMMENT - 1 discharge conveyor available (AA= 10 m /BB= 650 mm) - No cracks, no deformations

TECHNICAL SPECIFICATIONS Designation: Overhead Crane / Overhead Crane Wingspan: 39.4 m Number of hoists/trolleys: 3 pcs. Lifting capacity: 2 x 32 t / 1 x 10 t Load capacity of the bridge: 64 t Overhang: 12.0 m Working height: 18.0 m Lifting speed (fast): 5.00 m/min Lifting speed (slow): 0.80 m/min Hoist Control: 2sp Hoist classification: FEM M5 (2 m) Overload protection: SG Reeving: 24 Operating voltage: 400 V Control voltage: 230 V Frequency 50 Hz SPECIFIC COMMENT - Radio and cabin control possible - Renewal of cats in 2015

TECHNICAL SPECIFICATIONS Manufacturer: PS Förder- und Lagertechnik (KW Kranwerke) Designation: Bucket chain excavator Type: PSZ-80L Year of construction: 1992 Design: Land-based on crawler chassis Flow rate: approx. 100 cbm/h Conveyed material size: approx. 0 - 16 mm Conveying speed: 44 m/min Conveying depth: max. 15 m Bucket capacity: 75 ltr. Number of buckets: 47 pcs. Length of lower bucket ladder: 22.0 m Upper bucket ladder length: 6.85 m Boom length: 14.0 m Boom lifting speed: 1.5 m/min Discharge belt length: 15.0 m Discharge belt width: 650 mm Discharge height conveyed material: 5.5 m Travel speed: 2 m/min Track width: 900 mm External dimensions of track: 4,100 mm Generator: LEROY-SOMER Diesel Three-phase Generator Set Generator type: LSA 4450 VL11 (100 kW / 125 kVA) Current type, frequency, speed: 400/230 V, 50 Hz., 1,500 rpm Engine: IVECO diesel engine  ...

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

For sale: REINTJES Marine gearbox WAF 560 Reduction: 5,947:1 Built 1992 The gearbox is in very good condition, always stored in facility with climate control. Price is Ex Works - The Netherlands. In case you need we can arrange the transport with very interesting rates. if you need further assistance or information please e-mail us: info@amp-power.nl Pictures available on request

Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Used first-class renovated extrusion recycling plant EREMA for the processing of polyethylene and polypropylene. Capacity of approx. 1,100 kg/h. WITHOUT DEGASSING. Processing of only CLEAN material; without printing ink. Auch Folien + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Groninger vial filling & closing line comprising DFVG 4001 intermittend vial filling & stoppering machine with LF-unit, container diameter from 14 up to 68 mm, container height from 30 up to 140 mm, pre & post gassing, 4 filling stations using rotary piston pumps, in-process control for checking the filling volume, Siemens SIMATIC S7-300, electrics 230/400V/50Hz, electrical power 3.2 kVA, vial infeed via DTE 600 rotary infeed table (diameter 600 mm), linked directly to KVG 211 A crimping machine, container diameter from 16 up to 100 mm, container height from 30 up to 150 mm, capacity up to 3,600 vials per hour, includes Octum camera inspection system for checking the position of the bung/stopper and the bung/stopper gap, Siemens SIMATIC S7-300, electrics 230/400V/50Hz, electrical power 4.4 kVA, magazine outfeed, includes format parts for: Vials 2R (Ø16 x H35 mm) Vials 4R (Ø16 x H45 m ...

GEA Aeromatic-Fielder MP1 Fluid Bed Granulator, with two bowls suitable for batch sizes from 1 to 5kg (0.5kg/l), and 1.1 to 8kg, with drying, top spray granulation, and precision coating of pellets/mini tablets. WIP system. Class D containment, 10 bar pressure, ATEX, PLC controller on front panel, 3 stainless steel filter cartridges, solvent emission control, spray systems, full inlet air handling and preparation system. New in 2005 and unused.

Kilian T300/32 EU-B rotary tablet press suitable for round and shaped tablets, 32 stations (EURO-B tooling), suitable for tablets up to 16 mm diameter, maximum fill depth 16 mm, pre-compression 28 kN, max. main compression 100 kN, output up to 216,800 tablets per hour, rotary paddle feeder, includes Kilian CW100 control unit, machine net weight approx. 1855 kg

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

SPECIFICATIONS: Single chain Vertical machining Table enviable Equipped for the processing of doors.

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

- Trumpf DA65 control - Year of construction 2000 Specification - Pressing force: 2300 kN - Bending length: 3060 mm - Installation height: 535 mm - Inclination: ± 10 mm - Free column passage: 2690 mm - Projection: 410 mm - Working height with lower tool 100 mm: 1050 mm - Table width: 200 mm - X-axis travel: 600 mm - Max. stop range X-axis: 860 mm - R-axis travel: 250 mm - Z-axis travel: 2310 mm - Stroke: 365 mm - Rapid traverse: 200 mm/s - Operating rate: 1 - 10 mm/s - Retraction: 135 mm/s - Hydraulic oil volume: 400 l - Electrical: 37 kVA - Pneumatic: 6 (±1) bar - Dimensions WxHxD: 3660 x 3095 x 2310 mm - Weight: 18210 kg

Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Cloos MIG 350 Synergic - Welding machine - Metal invert gas welding (MIG) and metal active gas welding (MAG) of steel, aluminum and chromium-nickel - Incl. operating instructions - Built in 2007 Specification Entrance: - Nominal input voltage: 3/PE AC 400 V - Nominal frequency: 50 Hz - Maximum input current: 23 A - Mains fuse sluggish: 32 A - Mains connection cable: 4 x 4 mm² - Power plug: 32 A Exit: - Open circuit voltage Uo: 18 - 45 V - Welding range: 30 - 350 A - Duty cycle 100 %: 220 A - Duty cycle 60 %: 280 A - Duty cycle 40 %: 350 A General data: - Noise emission: < 70 dB(A) - Schutart: IP 23 - Cooling type: AF - Dimensions WxHxD: 430 x 930 x 980 mm - Weight: 160 kg

-with barrel clip for grabbing standing 200-litre steel sicken barrels and 110 to 220-litre plastic L ring barrels and lid barrels -Brace with attachment to adapt to different barrel sizes -with a wide chassis to cross euro pallets or to line reception tubs for 1 to 2 barrels -Hand hydraulics for slightly lifting the barrel -Built in 2008 -Load: 300 kg -Lift range: 120-700 mm -Mass BxHxT: 830 x 1550 x 1100 mm

Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg

- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

CO01081 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - ask us. Sample pictures - visit possible by arrangement. You can find more containers at: abc.lerch.net/Container/Buerocontainer/ Please also note our other offers.

CO01103 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - ask us. Sample pictures - visit possible by arrangement. You can find more containers at: abcs://abc.lerch.net/Container/Buerocontainer/ Please also note our other offers.

Heidelberg Speedmaster 52 4+, Year 2009 370x520 mm (14.5x20"), approx. 32.5 million impr. PressCenter Alcolor Autoplate Auto. Ink roller wash-up device Auto. blanket wash-up device Auto. Impressioncylinder washer optimized sheet guidance Low- pile delivery Antistatic device Double-sheet control Plus version Stream feeder Powder sprayer Etc. Available: at short term

THE CLASSIC DOUGHNUT FRYER Consistently high quality doughnuts due to soft turning device frying platform for 36 pieces; productivity per hour: 360 pcs.; manual lifting device; manual turn; temperature controller with temperature indication; dimensions: 1010x1120x820 mm; power: approx. 6.8 kW

Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour. method of careful processing of the dough; two dividing chamber; low oil consumption; weight range 150-900 g or 80-750 g ; hopper volume 120 l; machine weight 820 kg ; dimensions with hopper 1127x750x1612 mm ; power 1.1 kW renovated

Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...