used SSI for sale

Manufacturer: Hamba Maschinenfabrik GmbH, Germany Type: 2400 Capacity: up to 2.400 cups/h lanes: 1 lane with 12 slots Product: for example cream cheese, Yogurt, Ayran, Cream, etc. Filling volume: 100 to 500 ml Cup format : round 95 mm Sealing: alu plate Outlet conveyor included Option: refurbishment of the machine possible

Berning conveyor belt 7m (with link chain belt) Type: BM-FLB Serial Number: 0325608 Year of construction: 2009 Length: 7m Power supply: 230V Castors with parking brake (2 of which are missing / defective)

Manufacturer: VEB Wema Zeulenroda Type: PYE 160 S1 Stock number: 1024 Maximum pressing force: 160 tons Working pressure: 16 MPa Top table: 700 x 450 mm Lower table: 900 x 630 mm Ground clearance: 800 mm Cylinder stroke: 500 mm Downward speed: 200 mm/sec. Upward speed: 125 mm/sec Power requirement: 17 kW Oil volume in the tank: 500 l Weight: 7000kg

Name: Used Progressing Cavity Pump Manufacturer: Netzsch Type: NM063SY03S18K Year of construction: 1999 Material: Normal steel Drive motor: 15 kW Dimensions: L 3200 mm x W 450 mm x H 500 mm Empty weight: 300 kg Speed: 236 rpm operating pressure: 15 bar Operating voltage: 400 /690 V Protection class: 55 Flanges: DN 100 Condition: Used Tech. Documentation: No Accessories: Immediate availability Price: On request

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NM063BY03S18B Year of construction: 2003 Material: Normal steel Drive motor: 15 bar Dimensions: length 2900 x width 400 x height 500 mm Empty weight: 250 kg Operating voltage: 400 / 690 V Protection class: 55 Flanges: DN 100 Condition: Used Tech. Documentation: No Price: On request

Progressing cavity pumps are used in all branches of industry for the continuous conveyance of almost all media. It is particularly used for viscous, highly viscous media such as sludge, manure, crude oil and greases. Name: Progressing Cavity Pump Manufacturer: Netzsch Type: NM021SY04S24B Year of construction: 2003 Material: Normal steel Drive motor: 3.0 kW Dimensions: L 1700 x W 400 x H 300 mm Empty weight: approx. 80 kg Speed: 400 rpm Protection class: IP 55 Condition: Used Accessories: with external fan F100 Price: On request

Name: Progressing cavity pump used Manufacturer: Seepex Type: BN10 Year of construction: 1999 Material: Normal steel Drive motor: 9.2 kW operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg. Speed: 75 -430 rpm Capacity: 1.5 -12 m3H operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Protection class: 55 Flanges: DN 80 / 100 Condition: Used Tech. Documentation: No Price: On request

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NMO45BY04S18B Year of construction: 2007 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h operating pressure: 16 bar Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request

Name: Progressing Cavity Pump Manufacturer: Netzsch Type: NM045BY Year of construction: 2009 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8 - 10 m3/h Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request

Collin Heating Press 78 Tons for Deforming Plastics / Prepregs for Carbon Parts / Composites / Rubber / Ceramic Compounds Type: Press 500 P Plate press for plastics processing / polymer materials / ceramic masses Press pressure approx. 78 tons Temperature range from 20° to 300°C Usable crimping area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

REF-0 COMACO AGM 6 SEAMER WITH NON-MOTORIZED PLATE AND 24-VALVE VACUUM FILLING MACHINE (I) COMACO AGM 6 automatic can seamer with non-motorized compression plate. Can size: ø73mm. Complete with a 24-valve vacuum filling machine (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,400mm.

REF-407 VVA-300 AUTOMATIC VACUUM JAR SEALING MACHINE This machine with steam injection vacuum-seals round, square or irregular jars (provided that they have two parallel or symmetric sides) by means of a twist-off capping system using VAC-VEM type lids. For different jar types made of glass, PET, etc. The machine is equipped with an automatic lid feeder. The steam system allows its effective injection in order to reach a high vacuum level. The easily adjustable mechanism and the possibility of using the machine at low-speed operation make it possible for the operator to change the jar format and adjust the machine in very little time. This machine is completely made of stainless steel and other materials resistant to the corrosion caused by products used in the canning industry. Technical details: Manufacturer: VV INTERNACIONAL Model: VVA-300 Max. output: 300 jars/m ...

REF-371 FRATELLI INDELICATO ROTOFINISHER Fruit finisher (pulper and refining machine with adjustable pressing) Manufacturer: Fratelli Indelicato Model: Rotofinisher Applications: Designed to reduce the pulp content in citrus and tropical fruit juice Composed of two sieving bodies Power: 3kW Sieve dimensions: diameter-350mm, length-800mm Overall dimensions: l-1,600mm, w-1,300mm, h-1,700mm

REF-2495 FAM FLEXIFAM SLICER-DICER The FAM Flexifam is a cutting machine suitable for cutting into slices, strips and dices. Mainly made of stainless steel with the exception of some pieces of the drive. The chassis, the lamination of the plaques, the feed hopper and the outfeed hopper are completed with glass microspheres. The three-dimensional cutting operation ensures the perfect uniformity of the product. Brand: FAM Model: Flexifam Machine no.: 6700/2007 Year of manufacture: 2007 Three-phase. 400 V. 50 Hz. 20 A 5.5 kW/7.48 HP Throughput: 2,000 kg/h Dimensions: width 1,747 mm; length 1,066 mm; height 1,555 mm Weight: 550 kg Complete with one cutting head: 3 mm dices or 8 mm dices (choose one)

Props - 100 pieces We have been dealing with scaffolding for years, which is why we are the perfect contact for your questions about façade scaffolding and its elements. We look forward to your messages or calls. Specifications: Weight: 1.625.00 kg Length: 3.5 m Scope of delivery: 100 x Column 20 kN - galvanized 3.5 m Price: 3528 net (with valid VAT ID number) DE VAT 19% 670,32 Price incl. VAT: 4199 Gross We offer you a large selection of used and new scaffolding (façade scaffolding) from all common manufacturers, e.g. Layher, Plettac, Hünnebeck, Rux, Alfix, Baumann. Purchase and sale of new used scaffolding. Visit our other adverts. --PAYMENT-- Cash without deduction, fast transfer on delivery or transfer before delivery --DISPATCH-- With your own vehicles within 1 to 3 working days We also offer other types of façade, system or scaffolding i ...

scaff 70 compatible scaffolding package approx. 230.42 m2 NEW We have been dealing with scaffolding for years, which is why we are the perfect contact for your questions about façade scaffolding and its elements. We look forward to your messages or calls. Specifications: Weight: 2,143.45 kg Working area: 230.40 m2 Working height: 6.40 m Scaffolding length: 36 m The scaffolding package 230.42 sqm contains the following elements (pieces): 26 x frame 2.00m x 0.74m 44 x Wooden Floor 3.00 x 0.32m 60 x railing 3.00m 2 x Double End Railing 0.74m 8 x diagonal 3.60m 11 x Railing posts 1.00m x 0.74m 26 x Spindle Feet 0.60m 2 x Strin frame 1.00m x 0.74m 2 x step-through with flap and ladder 3.00 x 0.64m 12 x Normal Couplings 12 x wall anchors 0.50m 24 x toe board 3.00m x 0.15m 4 x strin board board 0.74m x 0.15m 12 x Eye Bolt 230 4 x Lower Diagonal Attachment  ...

Basic refurbished Roller Master 4 in a row with basic overhauled MUC Machine was completely dismantled and rebuilt. Machine has new (own) PLC control Based on the WP control New pneumatics unit from Festo (German manufacturer) New belts, pneumatic cylinders On request with new pretzel discharge (extra charge) Test run with dough possible at any time. Installation and commissioning as well as production support If more information is needed, please report it briefly.

with frame - sealing technology a pack format 2.4 (8 packs/cycle) Inert gas – regassing Output approx. 8 -9 cycles/minute Print marks – control CFS Cost Fox Software Film width (top web/bottom web) 620/ 622 mm

Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...

Mobile concrete batching plant, SUMAB K-60 Technical details: • 4 total storage tanks with 3.8 м3 each, with the possibility of increasing storages to 5 m3 • Pan mixer 1800/1200 litres, coated with 12 mm layer of special steel. • Automatic control for opening the damper supply for precast concrete. • 5 mixing arms. The special arrangement of the arms in the pan mixer allows all the parts of the mixer to be covered during the batch, which means that a high-quality concrete product is achieved. The K-60 Mobile concrete plant features a comfortable control cabin that allows for the automatic control of the system. The modern Siemens computer system enables you to produce over 100 recipes and types of concrete. You can print the specifications of any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Adva ...

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

Year of construction 1992 Book spine press electr. Drive hydraulic pressing Price on request. We deliver and install worldwide!

Fully functional CNC lathe DMG-Gildemeister CTX 310 V3 Year of construction: 2004 Control Heidenhain EP 4290 with ShopTurn 6.4 incl. tailstock C-axis with tool drive Servorevolver – Electrospindle Partial retrieval clamping device Commissioning: 18.01.2005 End of warranty: 17.07.2006 Spindle hours: 21,163.1 h (as of 30.01.2024) Accessories: -LNS Bar Feeder Hydrobar -Mist extraction ifs industrial filter IFMC 1100, year of manufacture 06/2015 -Chip conveyor Bürener Maschinenfabrik SPE 63/30-200 Z60, built in 2004 -All documentation Tools of the plant are not included in the price. The collet chuck for E173 pliers (without pliers) naturally remains on the machine. The plant has no defects and is currently producing on two shifts. The new plant has a delivery date of 12.07.2024. After delivery of the new machine, this machine is available for collection.  ...

Fully functional FARO Arm Measuring Arm Prime High Precision 3D Measuring Instrument Quality Control Year of construction: December 2012 Certification date: August 2014 Number: R04-02-12-28398 Single Point: 0.016 mm Volumetric: +/- 0.023 mm Made in Germany The Best Portable Coordinate Machine (CMM) High Measurement Accuracy, Measurement Stability Reduced inspection times, automatically generates reports Ready to use in a few seconds Measure parts and assemblies quickly, easily and precisely Ideal for complex measurement tasks Solid measuring plate with trolley table, 336 kg Drawer with key Degree of accuracy: DIN 876/1 Permissible deviation: 0.02 mm Actual deviation: 0.00589 mm Checked on 05.03.2013 Made in Germany With various accessories Measuring arm case HP PC Tower Screen Keyboard Lots of software e.g. Cam2 Measure 10, Nvidia Graphics, Windows, HP

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

LISTING ID: 22630 BRAND:IVECO MODEL: 8210 M22 POWER: 162 kW (220 hp) CD RPM: 2200 DISCPLACEMENT: 13.8 L BORE x STROKE (mm) 137 x 156 COMPRESSION RATIO: 16:1 HS CODE 84081019 NET WEIGHT 1130 kg (Dry)

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

Supports NOE 20-300 / NOE 20-350 , used Work economically, quickly and safely with robust Euro construction supports according to EN 1065 High load-bearing capacity Permissible column loads according to EN 1065 Long service life due to -Hot-dip / piece galvanizing -strong head and foot plate Low weight Wide adjustment range Protection against injuries caused by crushing protection 247 x Supports NOE 20-300, used, EUR 21,60 per piece 6 x stacking rack, galvanized, used, EUR 135,00 per piece 265 x Supports NOE 20-350, used, EUR 27,50 per piece 7 x stacking rack, galvanized, used, EUR 135,00 per piece Props NOE 20-300 / NOE 20-350 , used Work efficiently, safely and quickly using robust Europrops in accordance with EN 1065 High load capacity Allowable prop loads in accordance with EN 1065 Long service life through -Hot dip / discontinuous galvanising -Str ...

Peri Trio 552m² Peri TRIO is a craneable formwork system that can be used upright or horizontally. Thanks to the patented BFD directional lock, all element connections are made flush, aligned and tight.  The only necessary connecting part for normal element joints, external/inner corners, articulated corners, shims up to 10 cm or the clamping of squared timbers is the BFD directional lock (can be operated with one hand). With just a few element widths, all floor plans can be formed. The powder coating prevents the concrete from adhering and allows for easy and quick cleaning. Maximum allowable fresh concrete pressure: 80kN/m2 Peri Trio 552m² Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal e ...

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

The frames and skin are in a good working condition with used X-Life and parts of it are new with Fin-Ply. 6x Framax 2,40 x 3,30m 66x Framax 1,35 x 3,30m 27x Framax 0,90 x 3,30m 45x Framax 0,60 x 3,30m 8x Framax 0,55 x 3,30m 2x Framax 0,50 x 3,30m 14x Framax 0,45 x 3,30m 15x Framax 0,30 x 3,30m 1x Framax Uni 1,20 x 3,30m 4x Framax Uni 0,90 x 3,30m 22x Framax Inside corner 3,30m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency. Rapid working as so few worksteps are involved forming ...

scaff 70 compatible scaffolding package approx. 528 m2 NEW We have been dealing with scaffolding for years, which is why we are the perfect contact for your questions about façade scaffolding and its elements. We look forward to your messages or calls. Specifications: Weight: 3,863.23 kg Working area: 528 m2 Working height: 4.40 m Scaffolding length: 120 m The scaffolding package 528 sqm includes the following elements (pieces): 41 x frame 2.00m x 0.74m 74 x wooden floor 3.00m x 0.32m 120 x railing 3.00m 0 x Double End Railing 0.74m 14 x diagonal 3.60m 39 x Railing posts 1.00m x 0.74m 82 x Spindle Feet 0.60m 2 x Strin frame 1.00m x 0.74m 3 x access with flap and ladder 3.00 x 0.64m 27 x Normal Couplings 27 x Wall Anchors 0.50m 40 x toe board 3.00m x 0.15m 2 x strin board 0.74m x 0.15m 27 x Eye Bolt 230 14 x Lower Diagonal Attachment Price: 8242 net ...

scaff 73 compatible scaffolding package approx. 255.42 m2 NEW We have been dealing with scaffolding for years, which is why we are the perfect contact for your questions about façade scaffolding and its elements. We look forward to your messages or calls. Specifications: Weight: 1,895.96 kg Working area: 255.42 m2 Working height: 10.40 m Scaffolding length: 24.56 m The scaffolding package 255.42 sqm contains the following elements (pieces): 36 x aluminium vertical frame 2.00m x 0.73m 28 x Sturdy floor 3.07m x 0.61m 72 x railing 3.07m 6 x Double End Railing 0.73m 12 x diagonal 3.07 x 2.00m (3.60m) 7 x Railing posts 1.00m x 0.73m ALU 18 x Spindle Feet 0.60m 2 x Strin frame 1.00m x 0.73m ALU 4 x access with flap and ladder 3.07 x 0.61m 13 x Normal Couplings 13 x Wall Anchors 0.50m 32 x toe board 3.07m x 0.15m 8 x strin board 0.73m x 0.15m 13 x Eye Bolt 230  ...

Sliding belt conveyor belt cover conveyor belt VHV Anlagenbau, year of construction 2014, usable width 1200 mm, good condition Specifications: Manufacturer: VHV Anlagenbau Type: Cover belt conveyor Year of Make: 2014 Drive power: 2.2 kW Conveying speed: 0.42 m/s Flow rate: approx. 3 t/h (cardboard 0-200 mm) Wheelbase: 34,050 mm / 8,670 mm Belt width: 1,200 mm Gradient: 0.0° / 48°/ 17° Transfer height: approx. 4130 mm Materials: cardboard, paper, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

Gear slotting 5140, Russia production, with change gears

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 progr ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for si ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...

Lean emission controller for gas engines with cogeneration units, Motortech EMCon5 for sale, with original packaging

Reconditioned marine transmission ZF 63 E-Volvo for sale. Translation: A=1.75, B=1.77. The gearbox has been expertly overhauled and tested in our company.

For sale is a ZF 220 transmission with ratio 1:1.500. The transmission is currently still installed on a Volvo Penta D5A-B TA, but can be disconnected at any time. This display expressly refers only to the gearbox shown.

Transmission used, overhauled Ship boat reversing gearbox Delivery in possible exchange / reverse gear on exchange basis Various types and ratios available AS 71C; AS 72C; AS 73C; 10-17-000-001; AS1-71C; 10-17-000-002; AS1-71CR; 10-17-000-003; AS1-71CB; 10-17-000-004; AS1-71CBR; 10-17-000-005; AS2-71C; 10-17-000-006; AS2-71CR; 10-17-000-007; AS7-71C; 10-17-000-008; AS7-71CR; 10-17-000-009; AS3-71C; 10-17-000-010; AS3-71CR; 10-17-000-011; AS14-71C; 10-17-000-012; AS14-71CR various versions in stock

Transmission oil cooler (recon) various