used SSI for sale

ECKERT DIAMENT FIBER laser was built in 2011. High-performance laser FIBER with power of 2 kW allows cutting sheets of black steel with thickness of 12 mm, stainless steel with thickness of 8 mm and aluminum with thickness of 8 mm. The cutting process takes place on a pendulum exchange table with dimensions (length x width) 3000 x 1500 mm. The machine is equipped with a Precitec HP 1.5 YAG SSL+EG8010 cutting head and a YLR-2000 Compact IPG 2 kW laser resonator. The entire system is operated using a CNC controller EckLaser 2872. The laser cutting machine has worked a total of 22503 hours. Technical data of laser cutting machine ECKERT DIAMENT FIBER - laser power: 2 kW - thickness of cutting black steel sheet: 12 mm - thickness of cutting stainless steel sheet: 8 mm - thickness of cutting aluminum sheet: 8 mm - table dimensions (L x W): 3000 x 1500 mm - type of table: pendulum  ...

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

GUANGZHOU PC2660S plastic mill was manufactured by Chinese granulator manufacturer Guangzhou 3E Machinery Co. in 2018. The structure of the cascade knife granulator is made of high quality steel, ensuring rigidity, high efficiency and long service life of the machine. The machine is equipped with a rotor (cutting knife arrangement) with a cascade layout, consisting of 3 rows of 6 knives each. The rotor is 600mm long, 600mm wide and has a diameter of 260mm. The moving knives operate at a speed of 607 rpm. The drive system has a massive drive wheel, and the drive is transmitted via V-belts to the rotor pulley. The total weight of the machine is 1060 kg. Technical parameters of granulator GUANGZHOU PC2660S - layout of cutting knives: cascade - number of rotor knives: 3 rows x 6 pcs. - number of stationary knives: 2 rows x 2 pcs. - rotor length: 600 mm - rotor width: 600 mm - rot ...

MANURHIN KMX SWING 720 CNC lathe was built in 2004 in France. The automatic lathe is used for precision machining of workpieces with a maximum length of 2500 mm and a diameter of 20 mm, in ten axes. The high quality of the workmanship, high turning precision and reliability of the turning centre, will satisfy even the most demanding customers. The KMX SWING 720 swiss type lathe guarantees the possibility of performing a wide range of metal machining, thanks to the use of a main spindle together with a sub spindle rotating at a maximum speed of 10000 rpm. The machining tools are stored in a magazine with a capacity of up to 14 pieces and they are changed in a very short time. The lathe is equipped with a Fanuc Series 160i-T CNC controller for full control of the machine and a Hydrobar Express 226 LNS bar feeder. The total weight of the machine is 4300 kg. Technical parameters of  ...

SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

TWIN DISC MG514 marine transmission was built in Belgium. The device working with high- or medium-speed diesel engines used in, for example, tugs or ferries, optimises the control of engine power to increase overall cost-effectiveness, productivity and boat performance. The TWIN DISC MG-514 transmission operates at a rotational speed of 1800 rpm with a ratio of 2.00:1 and has 360 HP of power. The machine comes from an engine in very good condition with which it has worked for a small amount of time. The offered device is fully complete. The total weight of the machine is 525 kg. Technical data of the TWIN DISC MG514 transmission - ratio: 2.00:1 - power: 360 HP - maximum rotational speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - overall dimensions (L x W x H): 80 x 80 x 80 cm - total weight of MG514 machine: 525 kg

TWIN DISC MG514 transmission was manufactured in Belgium. Used on high- or medium-speed diesel engines, the machine significantly increases overall boat efficiency and productivity by optimising the control of engine power. The offered TWIN DISC MG-514 marine transmission with a power of 360 HP operates at a rotational speed of 1800 rpm and has a ratio of 2.00:1. A fully complete machine with low mileage, has been used on an engine in very good condition. The total weight of the machine is 525 kg. Technical specifications of the TWIN DISC MG514 marine transmission - ratio: 2.00:1 - power: 360 HP - speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - dimensions (L x W x H): 80 x 80 x 80 cm - weight of the MG514 machine: 525 kg

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

The ZVL BRH 40A II surface grinding machine was manufactured by the Czechoslovak concern ZVL, the Powaska Bystrzyca bearing production plant in 1985. The grinder is designed for grinding flat surfaces of various metal products, with a maximum length of 1500 mm, a width of 470 mm and a height of 500 mm. The machine has a work table with dimensions of 400 x 1500 mm and a 7.5 kW spindle, rotating at a speed of 1920 rpm. The total weight of the grinder is 4520 kg. The machine is offered with accessories. Characteristic parameters of the surface grinding machine ZVL BRH 40A II - working surface of the grinding table: 400 x 1500 mm - maximum grinding length: 1500 mm - the longest longitudinal table travel, manual: 1700 mm - maximum width of grinding: 470 mm - maximum height of grinding: 500 mm - the greatest load of the working table: 500 kg - the greatest transverse travel of the  ...

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

Laser cutting machine ECKERT DIAMENT FIBER 2 KW built in 2011. The machine worked for 2 years in one shift. Technical data of the laser cutter: - power: 2 kW - source: IPG - cutting head: Precitec - man hours: 8200 h - maximum cutting thickness, black steel: 12 mm - maximum cutting thickness, stainless steel: 8 mm - maximum cutting thickness, aluminum: 8 mm Machine equipment: - 2 exchangeable tables, dimensions: 1500 x 3000 mm - cooling system - filtration ventilation: the possibility of "return" of purified air to the hall or venting outside - additional software: Lantek Expert, used for nesting parts for cutting, allowing for the most effective use of material - an additional camera system that allows you to monitor the operation of the machine

Plasma-gas cutting machine ECKERT JANTAR 2 was produced in 2007. Technical parameters: – CNC control: ECS 859 – table: 9 sections, 1.62 m long each – table width: 3.2 m – table length: 14.58 m – number of slides: 3 – possibility of communication with a computer – possibility of plasma and gas cutting – 2 Harris gas burners – plasma cutting thickness: 8-10 mm – gas cutting thickness: up to 90 mm – power supply: 230 V – rated current: 12 A – plasma aggregate: PA-S45W

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

Offer via gebr. flexible shaft grinding machine SUHNER type Rotomax 3.5   - Lightweight and compact design - Stable high-performance motor and infinitely variable torque adjustment - Wide range of shafts and tools - Control from the handpiece by optional manual shutdown   Three-phase motor for 3-phase alternating current Protection class IP 44 Overload Power consumption 3.5 kW Voltage 400 V, 50 Hz Idle speeds Connection DIN 15: 500-10,000 min-1 Anschluss ‪DIN 10‬: 500–25.000 min–1 Speeds infinitely adjustable Mobile   Applications: Grinding, cutting, roughing, rusting, polishing, brushes, etc. For heavy work in foundries, in boiler and steel construction, in mechanical Workshops, stainless steel processing plants

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Inv. Num. : 7538 Type: CNC HAP 4200 Producer: ERMAK Created: 2008 Parameters: Control System: Delem DA-GGW Compressive force: 200 t Maximum bending length: 4100 mm Machine height: 3050 mm Machine length: 5150 mm Machine width: 2250 mm Machine weight: 15000 kg

Inv. Num. : 7539 Type: EHP 50 25/20 Producer: DARLEY Created: 1995 Parameters: Control System: Delem DA-56s Compressive force: 50 t Maximum bending length: 2500 mm Maximum distance between columns: 2650 mm Machine weight: 3400 kg

Inv. Num. : 7488 Type: Aries 245 II Producer: AMADA Generated: Parameters: Compressive force: 200 kN Machine height: 1963 mm Machine length: 3814 mm Machine width: 2560 mm Machine weight: 11600 kg

Inv. Num. : 7507 Type: 160 Producer: Rusko Generated: Parameters: Compressive force: 160 t

Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg

Inv. Num. : 7414 Type: DYNA-PRESS 24/12 PLU Producer: LVD Generated:- Parameters: Switch-on hours: 200 h Compressive force: 24 t Max. working length: 1250 mm Undertable width: 60 mm Number of axles: 5 Stroke: 150 mm Machine height: 2160 mm Machine width: 1090 mm Machine weight: 2500 kg Equipment: 3-axis backgauge

Inv. Num. : 6042 Type: Breeze Producer: Kornit Created: 2020 Parameters: Print area: 350 x 450 mm Number of printed t-shirt pieces per hour: 30-40 pieces Print resolution: 600 x 1200 DPI Number of nozzles per head: 256 pieces Number of heads: 6 pieces Pallet: 350 x 450 mm Equipment: Drying Oven Chiossi E Cavazzuti DiDo Shop The machine includes a stand for the machine and the controller

Inv. Num. : 6351 Type: Pega 30507 Producer: AMADA Created: 1997 Parameters: Compressive force: 294 kN

Inv. Num. : 4650 Type: LODD 315 Producer: ESPE Created: 1996 Parameters: Compressive force: 315 t Maximum bending length: 4000 mm Machine height: 4150 mm Machine length: 4000 mm Machine width: 2200 mm Machine weight: 33 t Equipment: Tools

Inv. Num. : 6336 Type: YCK-2A Producer: Beijing YC Digittech Created: 2013 Parameters: Compressive force: 1500 kg Material Dimensions: 85.6x54 mm Machine height: 1600 mm Machine length: 700 mm Machine width: 1100 mm Machine weight: 600 kg Productivity: 3500 cards/h

Inv. Num. : 6470 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg

Inv. Num. : 7286 Type: PT 63 Producer: IPTE Created: 1990 Parameters: Compressive force: 63 t

Inv. Num. : 6104 Type: T-STAR Producer: CENTAURO Created: 2018 Parameters: Control System: Osai Switch-on hours: Max. 100 h Maximum turning length: 1600 mm Non-contact motor Axle movement via ball-bearing threads CT/CAD for drawing profiles directly on the machine PC Touch Screen 15 Machining with a simple cobalt chisel (1.2 mm) Can program up to 10 work steps Can perform sub-steps and rework Possibility of manual turning Multi-function sliding keypad Mechanical workpiece centering Electric spindle brake Equipped with an additional milling unit

Inv. Num. : 6540 Type: IA 1 TL Producer: IXION Created: 2006 Parameters: Work table length: 700 mm Work table width: 500 mm Control system: Siemens Equipment: Drill bits (150x) Control system: Siemens Work table length: 700 mm Work table width: 500 mm Maximum table load (uniform): 1000 kg X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 1000 mm W-axis travel: 250 mm Cone: SK 40 Equipment: Swivel work table Leadership assignments High-pressure oil cooling (100 bar) Accessories

Inv. Num. : 6472 Type: A4 Producer: FINN-POWER Created: 1997 Parameters: Control system: Siemens Sinumerik 840 D Operating hours: 6100 h Compressive force: 23 t Maximum length of sheet plate: 2030 mm Maximum blade width: 1020 mm Max. sheet thickness: 8 mm Feed length X-axis: 2084 mm Feed length Y-axis: 1075 mm Maximum punching speed: 600 1/min Number of tools: 26 Punching diameter: 89 mm Machine weight: 10000 kg

Inv. Num. : 7033 Type: Trumatic 2020 R FMC Producer: Trumpf Created: 2007 Parameters: Compressive force: 18 t Maximum length of sheet plate: 2070 mm Maximum blade width: 1280 mm Max. sheet thickness: 6.4 mm Maximum punching speed: 60 1/min Punching diameter: 76 mm Machine height: 2080 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg

Inv. Num. : 4025 Type: CX 1000/30 Producer: EUROMAC Created: 2000 Parameters: Compressive force: 30 t Max. sheet thickness: 6 mm Total power requirement: 4 kW Feed length X-axis: 2000 mm Feed length Y-axis: 1000 mm Stroke: 60 mm Machine height: 1800 mm Machine length: 4000 mm Machine width: 2800 mm Machine weight: 6 t Equipment: Instruction manual of the punching press PC with pre-installed FabriWIN software to prepare programs for Extensive range of punches and dies Square - rectangular and circular profiles with multiple diameters New Head

Inv. Num. : 7227 Type: EUROPE 258 Producer: AMADA Created: 2001 Parameters: Compressive force: 20 t Maximum length of sheet plate: 4000 mm Maximum blade width: 1250 mm Maximum sheet plate weight: 100 kg Max. sheet thickness: 6 mm Total power requirement: 33 kW Stroke: 2100 mm Number of tools: 27 Machine height: 2200 mm Machine length: 4950 mm Machine width: 4400 mm Machine weight: 11500 kg

Inv. Num. : 5843 Type: MBS 6000 Producer: FUCO-HEG Created: 2019 Parameters: Control system: Siemens Gas flow: 7-15 l/min Carburetor Head: Steel Crane Systems ST1004 Headstroke: 4 m/min Weight: 800 kg Length: 1000 mm Consumables: nitrogen and argon Purpose: Degassing and purification of aluminium melts with nitrogen or argon with a maximum pressure of 5 bar