used SSI for sale

Inv. Num. : 6443 Type: TECHNICA PLUS Producer: DERATECH Created: 2009 Parameters: Control system: Cybelec DNC 880 S Operating hours: 3040 h Compressive force: 250 t Maximum bending length: 4100 mm Total power requirement: 18.5 kW Machine weight: 18000 kg Equipment: Tools 2-axis backgauge

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

Inv. Num. : 6021 Type: UKM 2004 DE-PL Producer: MAUTING Created: 2006 Parameters: Number of smoking trolleys: 4 pieces Rated current: 95 kW Size of the smoking trolley: 800x800 mm Doors on both sides Heating is provided by a register for heated water via gas/electric boiler or hot water The smoke generator is equipped with a smoke scrubber Wood chips are used to produce smoke (different varieties possible) The smokehouse is equipped with water and chemical distribution for the rehabilitation of the chamber and the periphery

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg

2 x shelf container / hazardous materials container with drip tray 2 pieces of shelf container / hazardous goods container with drip tray, Dimensions per container : width 3.1 m ; Height: 3 m; Depth: 1.5 m Complete price for both containers Euro 1.000,- + VAT Retail sale possible Sold without warranty. Pick-up only.

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...

Offered are sturdy wooden boxes with loose lids (1 x used) in top condition as export packaging or for storage. with runners for movement with a pallet truck, forklift, etc. Dimensions: width 80 cm, length 107 cm, height 60 cm In stock: 14 pieces Only pick-up possible

WEINIG Unimat 500 – 5 spindles • Planing width max. 230 mm • Planing height max. 120 mm • Feed electronically frequency-controlled 5-30 m/min. • Feed motor 4 KW • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 11 KW • 3rd spindle on the left with electr. Axle adjustment FORWARD – BACK • 4th spindle top 7.5 KW with electr. Axis adjustment HIGH-LOW • 5th spindle bottom 5.5 KW • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatic, high-low controlled • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Driven rubber roller in the run-out table • Electronic digital displays on 1/100 mm • Manual lubricant pump • Central positions of the lubrication points • GR ...

We have for sale a very good conditioned A1 with very low working hours. Tetra Pak® A1 for Tetra Classic® Aseptic (TCA) is a filling machine for aseptic packaging of liquid food. Tetra Pak® A1 for TCA puts aseptic packaging technology at your disposal, enabling you to produce the Tetra Classic® Aseptic package. Tetra Pak® A1 For TCA 150S Used Aseptic Filling Machine Make: Tetra Pak® Model: TCA A1 150 ml Slimline Area of use: juice, milk, water, tea, wine, other liquids Working hours: 2218 Year of manufacture: 2004 Capacity: approx. 10000 p/h Condition: very used good condition Tetra Straw Applicator 1 Make: Tetra Pak® Year of manufacture: 2005 Working hours: 2110 Tetra Pak® 10 m Conveyors

Brand new, unused Tetra Pak UHT machine type VTIS. 12,000 l/h for milk and ESL, 10,000 l-h for oat milk. Also suitable for processing cream and highly viscous products. Incl. asept. Homogenizer and 20,000L sterile tank

for sale AXA, still in production every inspection and or test possible

Automatic planing profile milling machine WEINIG Profimat 26 Super - Carpentry Working width 20 - 260 mm Working height 8 - 160 mm 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plaster bottom 4 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Lubricant pump manual Mechanical Digital Displays Machine in CE version Year of construction 2000 Without editing tools Machine is WORKSHOP TESTED in GOOD - CONDITION from stock Lieboch

Martin T 60 Classic sliding table saw Heavy precision sliding table saw Axis Positioning Control 5.7 Touch Screen Car. Scoring unit Motor 5.5 kW Saw blade tiltable 0 - 46° Saw blade diameter up to 400 mm Trimming length 3000 mm Cutting width with rip fence 1250 mm Width stop adjustment from the front by means of a handwheel on precision guides Reading width stop via touch screen Swivelling control panel above table CE version Machine is WORKSHOP OVERHAULED in TOP CONDITION from stock Lieboch

The T300 tablet press is a rotary press that compresses solids and is equipped with 40 punch stations. The exact characteristics of the press machine vary according to the type of punch chosen. Technical data: Length mm 1280 Width mm 865 Height mm 1850 Net weight Kg 1920 Power A 12 Frequency Hz 50 Voltage Volt 380 Productions characteristics: Machine speed 260,000 tablets / h Max. tablets diameter 13 mm Filling depth 2 – 16 mm Min. production 12,000 tablets/h Max production 300,000 tablets/h Mould external diameter 24.01 mm Mould height 22,22 mm The T300 is a rotary tablet press equipped with two pairs of pressure rollers, one for pre-compression, the other for main compression. The operator side of the press is mainly in the front part of the machine where the four manual wheels, the control elements and the console are located. The press is fed from the top, ...

This Qualicaps inspection machine combines computer image processing technique and CCD line sensor camera to capsule rectification-transfer mechanism. The appearance of the capsule is inspected by direct image capture with the camera, controlling its orientation and rotating the capsule during intermittent transfer. The machine controls filled hard capsules directly on the line by meticulous examination of pharmaceutical or nutraceutical products. It allows accurate inspection of capsule appearance performed by color line sensor cameras with the possible immediate expulsion from the production line through an appropriate rejection system, when the machine detect itself anomalies on the product. Technical data: Dimensions mm 2000 x 700 x 2450 Total weight Kg 1000 Voltage Volt 400 Frequency Hz 50 Production characteristics: Capacity 50,000 capsules/hour Compatible capsules: ...

40 m Ramada pallet rack Used goods, very good condition, see pictures Height 4.6 m Depth 110 cm Beam length 2.7 m Load/compartment 3000 kg Frame blue Straps orange Year of construction 2012 Negotiation price: € 2.950,-- net from stock Offer consists of: + 15 frames pre-assembled, depth 110 cm, height 4.6 m + 56 pcs. carriers, used goods, length 2.7 m, 3000 kg load/compartment +112 pcs Hook-in safety devices + 60 pcs concrete anchors Stress signs Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Wiesheu DIBAS 64S + 64L + extractor hood Year 2017 from the closure of a real market ideal for baking rolls and pretzels Doors electric, disappear in the oven, so not disturbing DIBAS 64S at the top with 9.6kW and DIBAS 64L at the bottom with 19kW, both with self-cleaning the tray frame is missing at the bottom very good condition

Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per rack row: 18,700 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 06 pcs. The scope of delivery includes: 07xPallet rack stand, used Material colour: sendzimir galvanised Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 13,000 mm high 995 mm deep 72x Pallet rack crossbar, used Material colour: orange Truss type: SLB 100|15 Box profile: 100 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,000 mm Max. load per pair of trusses 2,300 kg, with the same weight. Distributed load 144x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members ag ...

PLOT ELECTRONICS SENTINEL 2030 CNC milling machine was built in Poland in 2014. The machine, which is designed for precision cutting, drilling and engraving of materials, has a lightweight yet rigid design that eliminates any stress and guarantees very fast idling and machining feeds. The offer price includes extensive equipment, consisting of, among others, a reliable BECKER VTLF 2.250 vacuum pump, a high-speed spindle and a state-of-the-art CNC controller. To this date, the SENTINEL SN 2030 milling machine has machined PVC, PP and PE plastic sheets. The total weight of the machine is approximately 2000 kg. Technical data of the PLOT ELECTRONICS SENTINEL 2030 milling machine - CNC control: cncGraF Pro - number of axes: 3 (X,Y,Z) - feed in X/Y/Z axis: 2000/3000/270 mm - approach speed: 500 mm/s - table type: aluminium T-slot table + vacuum table - vacuum pump: BECKER VTLF 2.250/ ...

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

UNI-KAT SPARK 2 oxygen plasma cutting machine built in 2020 in Poland, is used in the thermal cutting of steel sheets. This versatile machine with extensive machining capabilities is ideal for even the most intensive applications in any production facility. Thanks to its extremely stable design with a large work area, the UNI-KAT SPARK2 plasma-gas cutting machine offers much greater cutting precision, compared to single-support cutting machines. In addition, in order to simplify the performed work, the drawings of the cut parts can be produced in most vector graphics programs. The offer also includes extensive additional equipment, including e.g. a HARRIS 198-2TF torch powered by technical propane-butane and technical oxygen, advanced CAD/CAM software and an air compressor. The machine has so far worked for current production (one shift) and has been regularly serviced. The UNI-KAT pl ...

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder  ...

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

MOST SPEEDCUT 15/30 plasma-gas cutting machine was built in 2018 in Poland. The machine used for professional production needs, performs precision cutting of metals with a maximum weight of 4 tonnes using a fully automated torch. The torch uses a special system to protect the torch from damage, which combined with the fully galvanised, single-module design of the machine guarantees long and trouble-free operation throughout its lifetime. The SpeedCUT 15/30 CNC cutting machine weighs 1500 kg Technical specifications of MOST SPEEDCUT 15/30 plasma-gas cutting machine - work table dimensions (L x W): 3000 x 1500 mm - travel speed: 25000 mm/min - working speed: up to 10000 mm/min - Z-axis feed range: 110 mm - maximum workpiece weight: 4000 kg - table type: waterbed table (stainless steel tub) - power supply: 230 V; 50 Hz - dimensions (L x W x H): approx. 3600 x 2050 x 1650 mm - we ...

DECKEL MAHO DMC 103 V CNC vertical machining center manufactured in Germany in 2005 is the ideal solution for serial or unit production. The machine efficiently machines heavy workpieces with a maximum weight of 500 kg using reliable components in the form of cutting tools and a high-speed spindle. The extremely stable construction made of high-quality raw materials effectively dampens any vibrations generated during milling, guaranteeing the highest possible process stability without any disruption. All this makes the DECKEL MAHO FAMOT DMC 103V CNC milling center the best choice for any production facility. The total weight of the machine is approximately 4500 kg. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - work table dimensions (L x W): 800 x 500 mm - feeds in the X/Y/Z axis: 630/500/500 mm - rapid traverse in X,Y,Z axis: 30000 mm/min - stepless a ...

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2

ECKERT JANTAR 2 plasma-gas cutting machine was manufactured in Poland in 2013. The machine designed for even the most intensive and demanding workpiece machining provides excellent cutting precision, high level of safety and trouble-free operation throughout its service life. The sturdy design combined with a powerful and efficient plasma source allows for reliable cutting of workpieces with a maximum thickness of 100 mm (oxygen cutting) or 50 mm (plasma cutting). All process parameters are programmed in the intuitive ECS 872 CNC control with high-end components, which performs the machining cycles fully automatically and minimises the necessity of machine operation by the operator. Technical data of ECKERT JANTAR 2 plasma-gas cutting machine - CNC control: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal thickness (oxygen cutting): 100 mm - maximum sh ...

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...