used SSI for sale

Inv. Num. : 5843 Type: MBS 6000 Producer: FUCO-HEG Created: 2019 Parameters: Control system: Siemens Gas flow: 7-15 l/min Carburetor Head: Steel Crane Systems ST1004 Headstroke: 4 m/min Weight: 800 kg Length: 1000 mm Consumables: nitrogen and argon Purpose: Degassing and purification of aluminium melts with nitrogen or argon with a maximum pressure of 5 bar

Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm

Inv. Num. : 7047 Type: HSP 600 AZ-RN a Producer: Brunnhuber Created: 1969 Parameters: Compressive force: 610 t

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Inv. Num. : 7360 Type: CLH 630 1/8 Producer: Vihorlat Snina Created: 1985 Parameters: Compressive force: 630 t

Inv. Num. : 6414 Type: TruBend 3100 Producer: Trumpf Created: 2016 Parameters: Control System: T3500T Compressive force: 100 t Maximum bending length: 3060 mm Stroke: 350 mm Machine weight: 8300 kg Equipment: Rear track gauge - 2 axles Tool clamping: manual - lower tool. Trumpf Quick Clamp (upper tool clamping) Crowning: Combined CNC-controlled and self-adjusting crowning system

Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel

Inv. Num. : 7022 Type: PPEB-EQ 80/2000 Producer: LVD Created: 2008 Parameters: Control system: CADMAN CNC Compressive force: 80 t Maximum bending length: 2000 mm Stroke: 200 mm Distance between frame walls: 1500 mm Maximum lifting speed: 130 mm/s Maximum bending speed: 11 mm/s Maximum retraction speed: 115 mm/s Total power requirement: 12.5 kW Main motor power: 7.5 kW

Inv. Num. : 6885 Type: C5 Producer: FINN POWER Created: 2007 Parameters: Compressive force: 300 kN Maximum length of the sheet plate: 3000 mm Maximum blade width: 1500 mm Max. sheet thickness: 8 mm Machine height: 2200 mm Machine length: 5570 mm Machine width: 5165 mm Machine weight: 13000 kg

Inv. Num. : 6978 Type: P4-2220 Producer: Salvagnini Created: 2003 Parameters: Switch-on hours: 66,600 h Compressive force: 220 t Maximum bending length: 2250 mm Max. bending height: 203 mm Maximum sheet thickness (mild steel): 2 mm Maximum sheet thickness (stainless steel): 1.2 mm Maximum sheet thickness (aluminum): 3 mm Equipment: Tools 2023 New hydraulic motor on ADP New valves on ADP New temperature sensor ADP Customization RIP Customization Adjusting the stop on the X and Z axes 2020 Replacement of the lower bending knife on P4 2220 Pressure test and replacement of 3 x oscillating cylinders Pressure test Upper bending of oscillating cylinders Regulation of the upper bending blade Adjustment of the lower bending blade Replacement of the cables on the left side of the valves and on the right side 3A1-AH 6 2019 Rotator Adjustment Replace ...

Inv. Num. : 4464 Type: PL-F UP Producer: OMC Created: 2014 Parameters: Compressive force: 105 t Under table length: 3500 mm Under-table width: 1300 mm Total power requirement: 3 kW Machine height: 1940 mm Machine length: 4000 mm Machine width: 1600 mm Machine weight: 4 t

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine height: 2600 mm Machine length: 2200 mm Machine width: 2000 mm Machine weight: 7500 kg Equipment: Technical Documentation

Inv. Num. : 6768 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm

Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool

Inv. Num. : 6731 Type: CX 1000/30 Producer: EUROMAC Created: 1999 Parameters: Compressive force: 30 t Maximum lifting speed: 200 mm/s Feed length X-axis: 2000 mm Feed length Y-axis: 1000 mm Stroke: 60 mm Machine height: 1800 mm Machine length: 4000 mm Machine width: 2800 mm Machine weight: 5250 kg

Inv. Num. : 6050 Type: 30T Producer: MEYER Produced: 1982 Parameters: Compressive force: 30 t Distance between frame walls: 300 mm Lifting height: 200 mm

Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface

Inv. Num. : 6443 Type: TECHNICA PLUS Producer: DERATECH Created: 2009 Parameters: Control system: Cybelec DNC 880 S Operating hours: 3040 h Compressive force: 250 t Maximum bending length: 4100 mm Total power requirement: 18.5 kW Machine weight: 18000 kg Equipment: Tools 2-axis backgauge

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

Inv. Num. : 6021 Type: UKM 2004 DE-PL Producer: MAUTING Created: 2006 Parameters: Number of smoking trolleys: 4 pieces Rated current: 95 kW Size of the smoking trolley: 800x800 mm Doors on both sides Heating is provided by a register for heated water via gas/electric boiler or hot water The smoke generator is equipped with a smoke scrubber Wood chips are used to produce smoke (different varieties possible) The smokehouse is equipped with water and chemical distribution for the rehabilitation of the chamber and the periphery

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

We are selling a Maho MH400E, which was discarded due to a new purchase and is fully functional. Machine was only used for training purposes and was only used sporadically CNC Tool Milling Machine MAHO Type MH 400 E Year of manufacture 1989 Travel X: 400 mm Y: 250 mm Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with pulling bolt type B Spindle speed 80 - 4000 rpm. 18 steps Feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2.5 m/min. Pinole Shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 400 volts, 50 Hz, 19 kVA - Swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swivel device for the vertical milling head - Splash guard cabin as table enclosure with 3 fold-up doors - Electrical control cabinet fixed to the machine -  ...

IVECO STRALIS HI WAY 260 2016 EURO6 REGISTRATION 7/2020 - 368000 Km - AUTOMATIC TRANSMISSION WITH 30 QUINTAL TAIL LIFT REFRIGERATOR LENGTH 9.60m / REFRIGERATOR HEIGHT 2.55m THERMO KING T-1200RV REFRIGERATION MOTOR 3RD INTELLIGENT AXIS INTENDED FOR: TRADE TRADERS WITH CHAMBER OF COMMERCE REGISTRATION UPDATED IN THE LAST 6 MONTHS.

This is an electric round cooking kettle from the premium manufacturer Electrolux/Therma from Switzerland, type PBON15EKEM (150 litres) from 2017. The device is suitable for cooking, steaming, poaching, braising or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here, the electrical energy is converted into steam, working pressure 1.5 bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the finishing process by an energy-saving microprocessor control. Equipped with the therma touch control system for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedesta ...

This is a 150 LITER boiling kettle from the premium manufacturer MKN, type Optima 850. The device is from 2006 and in a top maintained condition. The boiler is a double-jacketed boiler with a separate, integrated and low-maintenance VAPRO steam generator system for fast heat-up times and low energy and water consumption as well as high efficiency. Thanks to the VAPRO rapid steam system, you have short boiling times. In addition, the device has automatic process water monitoring and replenishment, which means that it is always ready for operation. The device has undergone a major inspection in our in-house workshop and is fully functional. The price quoted is net plus 19% VAT. Our used equipment service for you: • 3 months warranty on all electrical parts • High-quality brand-name appliances at fair prices • Professional overhaul / inspection & expert cleaning • Tested  ...

Construction Fences Barrier Fence Mobile Fence 98 mb We have been dealing with scaffolding for years, which is why we are the perfect contact for your questions about façade scaffolding and its elements. We look forward to your messages or calls. Specifications: Weight: 663 kg Quantity Name: 14 x Construction Fence 3.5 x 2.0 WZ 15 x Concrete Base 28 x Connecting Clamp - - INVOICING - - All prices are included. applicable (currently 19%) VAT for deliveries within Germany, the VAT will be shown on the invoice. If you are in possession of an active Transaction Identification Number for intra-community deliveries, please let us know when placing your order so that we can issue the invoice with 0% VAT. We ask you to contact us before you send us the order. --PAYMENT-- Cash without deduction, fast transfer on delivery or transfer before delivery --DISPATCH-- ...

GRIGGIO tenosquaring machine model TS3200: – 3200mm aluminium trolley – protection suspended on the blade – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3200-4500-6000rpm – engraver D=125mm, motor hp 0,75, 8000rpm – cutting width on parallel guide 1050mm – spindle moulder with shaft D=35 x L=180mm, engine hp 5.5, with 5 speeds 3000-4500-6000-8000-10000rpm Machine not according to CE standards, for export NOTE: The spindle moulder cap is missing

P134 - used approx. 40 m³ / 40,000 L polyester tank, GRP tank, lying on steel bases, good condition. Technical details: Capacity: approx. 40 m³ / 40,000 litres Material: Polyester / GRP Manufacturer: Reich-Tank Dimensions: approx. Ø 3.00 m × L 6.50 m / H incl. base 3.70 m Miscellaneous: Used polyester tank, professionally cleaned and in good condition. Above-ground tank on 2 steel bases, dome and all connections on top of the tank body. Pictures from the inside will follow. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price on request. Transportation can be arranged at a reasonable price. It is not possible to update all our  ...

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

Manufacturer: SCHWARTE Year: unknown Capacity per cycle: up to 600 kg Pressing stations: 72 pcs. Optional: incl. round and rectangular shapes Condition: Excellent, fully functional

Manufacturer: Hamba Maschinenfabrik GmbH, Germany Type: 2400 Capacity: up to 2.400 cups/h lanes: 1 lane with 12 slots Product: for example cream cheese, Yogurt, Ayran, Cream, etc. Filling volume: 100 to 500 ml Cup format : round 95 mm Sealing: alu plate Outlet conveyor included Option: refurbishment of the machine possible

Berning conveyor belt 7m (with link chain belt) Type: BM-FLB Serial Number: 0325608 Year of construction: 2009 Length: 7m Power supply: 230V Castors with parking brake (2 of which are missing / defective)

Manufacturer: VEB Wema Zeulenroda Type: PYE 160 S1 Stock number: 1024 Maximum pressing force: 160 tons Working pressure: 16 MPa Top table: 700 x 450 mm Lower table: 900 x 630 mm Ground clearance: 800 mm Cylinder stroke: 500 mm Downward speed: 200 mm/sec. Upward speed: 125 mm/sec Power requirement: 17 kW Oil volume in the tank: 500 l Weight: 7000kg

Name: Used Progressing Cavity Pump Manufacturer: Netzsch Type: NM063SY03S18K Year of construction: 1999 Material: Normal steel Drive motor: 15 kW Dimensions: L 3200 mm x W 450 mm x H 500 mm Empty weight: 300 kg Speed: 236 rpm operating pressure: 15 bar Operating voltage: 400 /690 V Protection class: 55 Flanges: DN 100 Condition: Used Tech. Documentation: No Accessories: Immediate availability Price: On request

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NM063BY03S18B Year of construction: 2003 Material: Normal steel Drive motor: 15 bar Dimensions: length 2900 x width 400 x height 500 mm Empty weight: 250 kg Operating voltage: 400 / 690 V Protection class: 55 Flanges: DN 100 Condition: Used Tech. Documentation: No Price: On request

Progressing cavity pumps are used in all branches of industry for the continuous conveyance of almost all media. It is particularly used for viscous, highly viscous media such as sludge, manure, crude oil and greases. Name: Progressing Cavity Pump Manufacturer: Netzsch Type: NM021SY04S24B Year of construction: 2003 Material: Normal steel Drive motor: 3.0 kW Dimensions: L 1700 x W 400 x H 300 mm Empty weight: approx. 80 kg Speed: 400 rpm Protection class: IP 55 Condition: Used Accessories: with external fan F100 Price: On request

Name: Progressing cavity pump used Manufacturer: Seepex Type: BN10 Year of construction: 1999 Material: Normal steel Drive motor: 9.2 kW operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg. Speed: 75 -430 rpm Capacity: 1.5 -12 m3H operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Protection class: 55 Flanges: DN 80 / 100 Condition: Used Tech. Documentation: No Price: On request

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NMO45BY04S18B Year of construction: 2007 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h operating pressure: 16 bar Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request

Name: Progressing Cavity Pump Manufacturer: Netzsch Type: NM045BY Year of construction: 2009 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8 - 10 m3/h Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request

Collin Heating Press 78 Tons for Deforming Plastics / Prepregs for Carbon Parts / Composites / Rubber / Ceramic Compounds Type: Press 500 P Plate press for plastics processing / polymer materials / ceramic masses Press pressure approx. 78 tons Temperature range from 20° to 300°C Usable crimping area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

REF-0 COMACO AGM 6 SEAMER WITH NON-MOTORIZED PLATE AND 24-VALVE VACUUM FILLING MACHINE (I) COMACO AGM 6 automatic can seamer with non-motorized compression plate. Can size: ø73mm. Complete with a 24-valve vacuum filling machine (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,400mm.