used STANKO for sale

The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg

Inv. Num. : 7361 Type: MS 248 Producer: STANKO Generated: Parameters: The mill is in good condition.

Table Type Boring Machine STANKO Model: 2A620 Technical Details: Spindle diameter: 90 mm Planning shield diameter: 630 mm Table working area: 1120 mm x 1250 mm Max table travel: Longitudinal: 1000 mm Transverse: 1250 mm Max headstock vertical travel: 1000 mm Spindle travel: 710 mm Spinle taper: 7: 24 Number of spindle speeds: 23 Main motor power: 10 kW Machine dimensions: Length: 6770 mm Width: 3900 mm Height: 3100 mm Net weight: 16000 T

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,

Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

Manufacturer | Manufacturer: Stanko Type | Type: 16k20 Stock Number | Stock Number: 0980 Year of construction | Year of manufacture: 1978 Turning length | Turning length: 1000 mm Swing diameter over bed | Swing diameter over bed: 440 mm Spindelbohrung Spindle bore: 50 mm RPM | turning speed: 12.5 - 1600 rpm Tension | Voltage: 380 V Engine power | Drive power: 10 kW Dimensions (LxWxH) | Dimensions (LxWxH): 2800 x 1200 x 1800 mm Weight Machine | Weight of machine: 2,5 t

Manufacturer: Stanko Type: H5222A Stock number: 0982 Punching: Ø30 in 16mm Notching: 100 x 12mm Round material: 45 mm Square material: 40 x 40 mm Angle steel: 125 x 125 x 12 mm Dimensions (LxWxH): 2000 x 1400 x 2400 mm Machine weight: 2.35 t

Specifications: - Drilling capacity 60 mm - Projection 1600 mm - Drilling spindle mount MK 5 - Drilling spindle stroke 390 mm - Spindle speeds, 20 steps 20 - 2000 rpm - Clockwise and counterclockwise rotation - Feed, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Electromechanical clamping of the boom and drilling unit - Distance between machined machine bed – drill quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Dice table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

; Operational

Spline shaft milling machine STANKO 5350 without change gears.

Gear hobbing machine STANKO 5B312 with change gears.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Morse 6

Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm

Machine Type: Hacksaw Machine Manufacturer: STANKO Model No.: 8725 Year of construction: 1986 Condition: good Offer Type: Used Machine Specifications: Cutting area: Ø 250 mm Drive type: el./hydr. Propulsion: 2.2 kW Remark: coolant device, Hydraulic lift-off Weight: 500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

grinding length: 800 mm grinding width: 200 mm workpiece height: 300 mm table adjustment: längs 850 mm table adjustment: quer 200 mm Table dimensions: 1900x450 mm table surface area: L:800 x B:200 mm grinding spindle speed: 2860 U/min spindle throat normal: 320 mm dimensions of grinding wheel: installed on machine / an M. Ø 240x26 mm dimensions of grinding wheel: bis / up to bis Ø 240 mm magnetic plate size: 630x200x100 mm feed: table quer: 0,02-0,4 mm/min total power requirement: 2,2 kW weight of the machine ca.: 1,97 t dimension machine approx.LxWxH: 2,0 x 1,4 x 2,0 m dimension coolant device LxWxH: table quer: 0,02-0,4 m

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Spiral Bevel Gear Generator Stanko 5C280P gear diameter 800 mm, module 16 Max gear ring width 125 mm, Spindle speeds range 20-125 rpm, Main motor power 7,5 kW, Overall dimensions LxWxH 3235x2180x2200 mm, Weight 15 tons.

Table 1120x4000mm 2 milling and 2 planing heads, and 1 grinding head Workpiece dimensions WxH 1250x1120 Spindle speed: - Vertical (stepless) 5...1800 rpm - Horizontal (4 speeds) 100;200;500;1000 rpm Limits of working feeds at milling: - of a table 25...10000 - Supports and movable-sleeves 5...2500 Stroke length Sliders 300 mm Power of electric motors: -table in a planing mode 90kW -vertical spindle 30kW -vertical horizontal 22/26kW Machine overall dimensions: 10600x5400x4600 mm Machine weight 41t

Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 3100 EUR

Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg

Max wheel diameter 800 mm  Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm  Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR

Max mass of drop parts 150 kgs. Price 3400 EUR

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance between table and slide, mm 320 Main drive motor power kW 16 Table size width / length mm 580/650 Machine dimensions Length Width Height (mm) 2560_2020_3840 Weight kg 11000

BRAND: STANKO YEAR: 1972 MODEL: 1525 APPLICATION TYPE: TURNING LOCATION: SPAIN MACHINE TYPE: VERTICAL LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 5700 MM MEASUREMENTS DEPTH: 5000 MM MEASUREMENTS HEIGHT: 5400 MM MACHINE WEIGHT: 35000 KG WORKPIECE WORKPIECE DRM: 2500 MM WORKPIECE WEIGHT: 12000 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - PLATE DIAMETER 2250 MM - MAXIMUM TURNING DIAMETER 2500 MM - MAXIMUM TURNING HEIGHT 1500 MM - TWO TURNING COLUMNS - TILTING HEADS - LATERAL TRAVEL OF EACH HEAD 1000 MM - VERTICAL TRAVEL OF EACH HEAD 1000 MM - INDEPENDENT CONTROL OF EACH COLUMN

Gear hobbing machine 53A50H, STANKO, with change gears

Gear slotting 5140, Russia production, with change gears

Gear grinder machine 5A841, Stanko, with change gears

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1120 mm z-travel: 1000 mm table surface area: 1250x1120 mm spindle taper MT: 5 spindle turning speed range: 12,5-1600 U/min Radial face slide: 800 mm Table load: 3000 kg total power requirement: 12,5 kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens chip conveyor: total power requirement: 100 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m vertical lathe with two RAM, faceplate Ø 2000 mm, SPS supported control for storable cycles, RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling, Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK, a 90 degree angle is missing from the control panel arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 250 mm table height: 110 mm weight: 51 kg dimensions of the machine ca.: 550 x 340 x 170 mm - Rotary table can be set up vertically or horizontally The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 235 mm workpiece height: 320 mm table surface area: 630 x 200 mm table load: 500 kp grinding spindle speed: 2680 U/min adjustment of spindle-head: 365 mm stroke speeds: 2 - 30 m/min cross travel: 200 mm adjustment 1 division =: 0,05 mm grinding wheel size: 250 x 25 x 75 mm voltage: 380 V / 50 Hz hydraulic motor: 1,1 kW grinding motor: 2,2 total power requirement: 4 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,0 x 1,6 x 2,0 m magnetic plate 570 x 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 200 mm total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 1 x 1 x 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 1600 mm taper MK: 5 serial number: 14442 weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 8 mm distance between columns: mm electrical: . weight of the machine ca.: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mm grinding length: 4000 mm centre height: / mm weight of the machine ca.: 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, en ...

Type: Stanko 1516 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 950 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1400 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long : 3170 mm Wide: 3030 mm Height: 4100 mm Weight: 20 ton

Type: Stanko 1512 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 775 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1120 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long : 2750 mm Wide: 2975 mm Height: 4100 mm Weight: 16,5 ton