used STANKO for sale

Face plate STANKO Outer Ø: 400 mm bolt circle: 135 mm height with jaws: 160 mm bore Ø: 100 mm total height: 160 mm 4 jaws New ! Dimensions: 400 x 400 x 160 mm

Machine vice STANKO jaw width: 250 mm wingspan: 220 mm jaw height: 70 mm good condition ! Dimensions: 650 x 300 x 180 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm jaw height: 80 mm wingspan: 10 - 350 mm on turntable with graduation 360° rotatable used, tested ! solid design ! Dimensions: 670 x 450 x 225 mm

Rotary table STANKO 720440023 Ø 400 mm table height: 160 mm used, tested ! Dimensions: 500 x 600 x 160 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable can be clamped on both sides ! a slotted hole for fastening is damaged !; used, checked! solid design ! Dimensions: 700 x 355 x 235 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable New ! solid design ! Dimensions: 670 x 345 x 215 mm

Water separator, steam trap STANKO 22-12x403 1.0 MPa ( 10 bar ) Connections: 3/8 ( inch ) installation length: 90 mm New ! Dimensions: 185 x 90 x 88 mm

Emulsion pump, coolant pump STANKO PA-22 ( -22 ) Immersion depth: 100 - 220 mm Pump base: 170 x 130 mm Pump flange: Ø 60 mm, length: 115 mm Q: 22 l/ min p: 0,2 kg/cm² ( 0.2 bar ) connection: 1/2 ( inch ) motor: 0.52 / 0.30 A 2800 rpm 220 / 380 V 3AC 50 Hz used, tested ! Dimensions: 400 x 170 x 160 mm

Machine vice STANKO / BZSP (Made in USSR) jaw width: 300 mm wingspan: 20 - 275 mm on turntable with graduation solid design ! Dimensions: 550 x 370 x 225 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0221 Jaw width: 200 mm jaw height: 65 mm wingspan: 0...260 mm on turntable with graduation 360° rotatable massive design ! Dimensions: 600 x 370 x 185 mm

Faceplate STANKO 7103-0049 Outer Ø: 400 mm bolt circle Ø : 135 mm bore Ø: 100 mm New ! preserved ! Dimensions: 400 x 400 x 165 mm

-Flood damage machine, -mechanically still used a year later, -Main motor defective, geometrically fine, -little used, electrics in order, -Stanko Carousel DM (Wolf, Solventum) Attention! This machine has already been dismantled and is in storage.

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm

faceplate diameter:400 mm weight of the machine ca.:60 kg

Description: SPECIFICATIONS Character: Stanko Type: 40 Capacity: ø40 mm Table length: 500 mm Table width: 450 mm Table top name: MK 4 Unloading: 300 mm Head manually height adjustable: Yes Table manually height adjustable: Yes No automatic feed: Yes Gear switched: Yes Voltage: 380 V Approx. Onsite Dimension. (l x w x h): 1,050 x 900 x 2,600 mm, weight approx.: 650 kg

Spherical roller bearings -Bearing type: spherical roller bearing -Bore: Ø 110 mm -Outer diameter: 200 mm -Width: 53 mm -Weight: 7.5 kg

Spherical roller bearings -Bearing type: spherical roller bearing -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.2 kg

spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1120 mm z-travel: 1000 mm table surface area: 1250x1120 mm spindle taper MT: 5 spindle turning speed range: 12,5-1600 U/min Radial face slide: 800 mm Table load: 3000 kg total power requirement: 12,5 kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens chip conveyor: total power requirement: 100 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m vertical lathe with two RAM, faceplate Ø 2000 mm, SPS supported control for storable cycles, RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling, Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK, a 90 degree angle is missing from the control panel arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 235 mm workpiece height: 320 mm table surface area: 630 x 200 mm table load: 500 kp grinding spindle speed: 2680 U/min adjustment of spindle-head: 365 mm stroke speeds: 2 - 30 m/min cross travel: 200 mm adjustment 1 division =: 0,05 mm grinding wheel size: 250 x 25 x 75 mm voltage: 380 V / 50 Hz hydraulic motor: 1,1 kW grinding motor: 2,2 total power requirement: 4 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,0 x 1,6 x 2,0 m magnetic plate 570 x 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 200 mm total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 1 x 1 x 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 1600 mm taper MK: 5 serial number: 14442 weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 8 mm distance between columns: mm electrical: . weight of the machine ca.: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mm grinding length: 4000 mm centre height: / mm weight of the machine ca.: 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, en ...

The machine is in good technical condition. Circulating diameter above the bed:: 400 mm Max. turning length: 570 mm Max. turning diameter above the bed: 400 mm Max. rotating diameter above the support: 220 mm Spindle bore: 52 mm Minimum spindle rotation speed: 9 1/min Maximum spindle rotation speed: 1600 1/min Total power: 7.6 kW Dimensions LxWxH: 221 x 1020 x 1350mm Weight: 2800 kg Accessories see photo By prior arrangement, the possibility of a tour in progress.

Stanko 800 mm Surface Grinding Machine Machine is made in 1984 but it has been renewed in 2022. -There is a ball screw in both axes. It has a movement sensitivity of -0.001 micron. -Automatic transition program available. -The whole system is new. -All engines are new. -7018 bearings are used in the stone shaft, 4 at the front and 2 at the rear. -Magnetic mirror can move at -3 and +3 degrees. -It has magnetic pickup feature. -Everything is new except the die-cast body. -Stone diameter 500 mm. -Maximum work height 300 mm. -15 KW Spindle motor. -7.5 KW mirror motor. -2x1.5 KW servo motors. Machine is in excellent condition

Hmotnost stroje: 32750 kg Celkový příkon stroje:: 42 kW Max. průměr broušení: 700 mm Vzdálenost hrotů: 4000 mm Max. hmotnost obrobku: 3000 kg

Round Dividing Table, Rotary Table, Circular Dividing Table STANKO 7204-4022 Table diameter: Ø 400 mm Table height: 140 mm Nu Diameter: 14 / 24 mm Groove depth: 19 mm Centering hole in table: Ø 40 mm, Depth: 10 mm Mounting holes in base plate: Ø 18 x 30 mm ( U-shape ) used, tested ! Dimensions: 730 x 610 x 160 mm

Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm