used stanko forging hammers

Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR

Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 3100 EUR

Max mass of drop parts 150 kgs. Price 3400 EUR

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

Table Type Boring Machine STANKO Model: 2A620 Technical Details: Spindle diameter: 90 mm Planning shield diameter: 630 mm Table working area: 1120 mm x 1250 mm Max table travel: Longitudinal: 1000 mm Transverse: 1250 mm Max headstock vertical travel: 1000 mm Spindle travel: 710 mm Spinle taper: 7: 24 Number of spindle speeds: 23 Main motor power: 10 kW Machine dimensions: Length: 6770 mm Width: 3900 mm Height: 3100 mm Net weight: 16000 T

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Max wheel diameter 800 mm  Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm  Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

Table diameter: 7100 mm Turning diameter: 8000 mm Turning height: 3240 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   MAKE  STANKO 3KTC TYPE   1580 L YEAR    Overhauled 2006 SPECIFICATIONS Controll  Conventionel Max. turning diamter Ø   8000 mm Table / chuck size Ø   7100 mm Workpiece height    3240 mm Work piece weight   125000 Kg Horizontal movement support / ram    4400 mm Stroke support left ram    2000 mm Stroke support right ram    2000 mm Angle adjustment / ram swivable   - 15 / - 30 Gr Live tooling    Milling spindlel 650 Rpm Singel column or double column Double column   Spindle speeds / ranges    19.6 Rpm DIMENSIONS Length   9000 mm Width     14000 mm Height ...

Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...

Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 25 HP/kW Positions ATC: 0   Positions APC: 0   SPECIFICATIONS Max. turning diamter Ø   1600 mm Table / chuck size Ø   1400 mm Workpiece height   1000 mm Work piece weight   8000 Kg Horizontal movement support / ram   700 mm Stroke support left ram   850 mm Angle adjustment / ram swivable   35 Gr Singel column or double column   Single column Spindle speeds / ranges  5 - 200 Rpm Power  25 Kw DIMENSIONS Length   3500 mm Width   4200 mm Height   4750 mm

Box-stand gear drilling machine make STANKO type 2 H 118Fabr. -No: 43358Technical specifications:Drilling capacity steel: 22 mmSpindle mount: MK 2Table size: 360 x 320 mmDrill head and table height adjustable6 feed rates: 0.1-0.569 spindle speeds: 180 - 2800 rpmMotor power: 1.5 kWExternal dimensions L x W x H: 500 x 700 x 2000 mmWeight approx: 350 kgWith- coolant device- right + left run- automatic feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

Electronic Components Drilling Rig StankoImport Stanko-Import 2A622/1600 Electronic components from a Stanko Import drilling rig How 3-pulse thyristor amplifier Bosch Siemens Sikostart Bosch PC200 ZE with Bosch Eprom Bosch PC200 E24V Input Bosch PC200 AR/2A Output Bosch PC200 NT5V Gvvrsw Murrelektronik Type NLS 100-220/24 Uprim 110/220 Upc 24V= Mat.Nr. 031447-102401 Mat.Nr. 031447-102303

Radial drilling machine make STANKO type 2 A 554Machine -No: 8579, built in 1990Technical specifications:Drilling capacity i. Full ST 450 mmThread cutting ST 45 M 52Discharge 1600 mmSpindle mount MK 524 speeds 18-2000 rpm.24 feeds 0.045 - 5.0 mm / minColumn diameter 315 mmDrive power 9.0 kWDimensions L x W x H 2850 x 1030 x 3430 mmWeight approx. 4700 kgWith- Cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make STANKOIMPORT type 2 K 52-1Fabr. -No: 176Technical specifications:Drilling capacity in steel: 25 mmmin./max projection: 300/800 mmVertical boom adjustment: 625 mm8 spindle speeds: 63 - 1600 rpmSpindle mount: MK 2Workpiece height: 1000 mmQuill stroke: 250 mmFeeds: 0.125 - 0.2 - 0.315 mm / revColumn diameter: 180 mmClamping surface of the base plate: 900 x 630 mmDistance table-lower spindle: 125/1000 mmTotal power requirement: 1.5 kWExternal dimensions LxWxH: 1760 x 915 x 1970 mmMachine weight approx: 1.25 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface grinding machine make STANKO type 3 D 711 WF-11Fabr. -No: 1330, built in 1989Clamping surface of the magnetic plate: 630 x 200 mmTravel length: 700/670 mmTravel crosswise: 250/245 mmGrinding wheel size: 250 mmGrinding wheel speed: 2230 rpm.Distance spindle axis table: 80 - 550 mmVertical sanding adjustment: 80 - 550 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 35 m / minCrossfeed stepless: 0.3 - 40 mmVertical adjustment stepless: 0.001 - 0.09 mmRapid traverse vertical: 0.3 m / minRapid traverse cross slide cross: 1.6 m / minDrive power: 4 kWOutside dimensions approx: 2500 x 1700 x 2000 mmWeight ca.:2,6 tWith- Magnetic disk- Cooling device with magnetic separator- separate electrical cabinetused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ar ...

Surface Grinding Machine Fabr. STANKO Type 3 E 711 WFabr. -No: 6171, year of construction ca. 1985Clamping area of the table: 630 x 200 mmSchleifscheibendrm. min / max.: 160/250 mmGrinding wheel speed: 2680 rpm.Spindle axis table clamping surface distance: 80 - 445 mmVertical sanding adjustment: 365 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 30 m / minVertical adjustment stepless: 0.002 - 0.08 mmRapid traverse grinding stick vertical: 0.3 m / minRapid traverse cross slide cross: 1.5 m / minDrive power: 4 kWelec. Connection: 220 / 380VOutside dimensions approx: 2000 x 1770 x 1920 mm highWeight approx: 3020 kgWith- Separate control cabinet- Suction- Hydraulics- Filter- several grinding wheel holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are no ...