used stephan cutters and vacuum cutters

Stephan Kutter UMB 120 E, motor 30 Kw. + 2 Kw., tiltable, capacity 120 ltr., incl. spare blade 1 set, very good condition

STEPHAN Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating/cooling on the jacket, 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor (PT-100) inside the product, 2x mixing blades, max working pressure in the bowl 1,5 bar, max temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, pneumatic outfeed valve connecting for emptying the bowl without tilting (valve itself excluded), scraper of the wall is electric driven (slow turning), 3 manual tightening clamps. Main motor for the cutting knife: 380 Volt - 50 Hz - 10 / 17 kW - 720 / 1.470 rpm - 28 / 36 Amp. Stand alone main operation and control panel with relay controls and on/off switches., Type of Machine: Universal machin ...

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), stainless stee ...

Stephan MCHD 30-II micro cutter

Stephan MCV10 Microcut, continuous cutter, colloid mill, koial mill, emulsifier Voltage: 400V Speed: 2850rpm Stainless steel funnel Machine heavily soiled and with rust deposits on the housing without nameplate very loud run, because bearing damage, therefore sale as spare parts donor or hobbyist object Video about test run available

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

The frame mounted inline Stephan Microcut MCH 20K is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a processed cheese / vegan cream cheese plant. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements.Infeed hopper (± 120 liter) with feeding spiral with gear motor for high viscose products and big pieces, who moves the product to the cutting / emulsifiying set. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 380 V - 27,5 A - 2.925 r ...

Vakummic Stephan Type: VM 100 for 100liter made of stainless steel analog control with timers Boiler is tiltable excellent for mixing ingredients/ salads/ minced meat on rolls Condition: Good

Product number: 2681 Type: Alvac-11-DG Serial number: 0014-5167 Year of construction: 2004 Chamber size: 500 x 500 x 200 mm Seal bar: 500 mm Pump: Busch, 63 m³/h Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 800 x 60 x 1000 mm With gas flush

Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60

The manufacturer is probably the company Stephan.Der of heated tray fits under a Stephen...

Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets

Stephan Feinstzerzerer Type: MCH-D 50 Drive: 44 KW performance in the hour depending on the desired fineness of the starting product. 1500- to 3000 Kg/hour The machine is ready for operation as if from the customer. With new cutting kit

Stephan Emulsifier / micro-cut Type: MCH.D 180 year.: approx. 1993 capacity per hour: approx. 2500-up to 8500 kg (product dependant) funnel version With feeding screw on the motor shaft Cutting set diameter: 180 mm including new blade sets. Cutting head: level 1, Z 24 Cutting ring: level 1, gap of 0.2 mm to 3.0 mm. Cutting head on request: level 2, Z 24. Cutting ring: level 2, gap size on request from 0.2 mm to 3.0 mm. price of the machine: 32.900,00 with new blade sets; 24.900,00 without blade sets. Emulsifying, cutting without metal abrasion!

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion

If you have any questions: 01718367957

Used cheese mixer Brand: Stephan Type: Capacity: 80 litres

Brand: Stephan Type: UMM/SK 40 Capacity: 40 L gross per batch Motor: 2,2 kW Eletric: 380 V / 50 Hz

Manufacturer: Stephan Model: UMM SK40 E GNI Capacity: 120 kg / h Capacity: 30 litres per batch Volume: 40 litres Maximum temperature: 127 ° C This is a used Stephan UMM / SK 40 E vertical machine for cutting, mixing and heating products such as cheese. The machine has a double wall for indirect heating and steam in Duesungen in the pan to heat the product directly. The machines are equipped with a high speed cutter, a slowly rotating agitator and a drain valve to remove the product from the pan. It is a batch process by approximately 6-10 minutes per batch

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Cutting sets and moving in snails Suitable for Stephan Machines

with vacuum pump speed-controlled FU with double coat Panel mobile cart Temperature gauge Manual Spare parts Dimensions LWH: 1000 x 700 x 1300 mm Weight: approx. 150 kg

Stephan UM25 Universal Machine three speeds 720/1430/2880 rpm Mixed insert blunt Stainless steel boiler with double jacket Machine tiltable for removing the processed medium Machine in very good condition Video about test run and other pictures available

Laboratory processing plant (universal machine) Manufacturer: Stephan Type: UMC 12-F No.: 712.673.01 Built: 1986 Power: 1.8 kW 380 V, 50 Hz 150-2800 rpm speed-controlled with double jacket, sight glasses with new control cabinet very good condition on request: with small vacuum pump LBH system: 500 x 400 x 640 mm LBH control cabinet: 600 x 600 x 220 mm LBH pump: 270 x 220 x 210 mm