Model
(Manufacturer: WMW)
Very good condition, with change gears and accessories, new belts, new diamond dressers, preparation for oil filtration new.
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
Usable length 2,000 mm Max. sheet thickness for mild steel 2.5 mm Opening width of the upper beam 250 mm Drive power of the bending beam 5.5 kW
C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany
BRAND: WMW YEAR: 1988 MODEL: SI4 APPLICATION TYPE: GRINDING LOCATION: GERMANY MACHINE TYPE: GRINDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2200 MM MEASUREMENTS DEPTH: 1400 MM MEASUREMENTS HEIGHT: 2000 MM MACHINE WEIGHT: 5300 KG MAIN DRIVE SPINDLE SPEED RANGE: 11 500 - 29 000 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - ROTATION DIAMETER: 315 / 450 MM - GRINDING DEPTH: 200 MM - TAPER GRINDING UP TO: 60 DEGREES - GRINDING DIAMETER - INSIDE: MIN. /MAX. 5 / 200 MM - TABLE STROKE: 5 -560 MM - RAPID TRAVERSE Z-AXIS: TABLE 12 M/MIN - INFEED PATH: TABLE UP TO 0. 8 STEPLESS MM - GRINDING WHEEL DIMENSIONS: Ø 80 X WIDTH 80 MM - OSCILLATING STROKE OF THE TABLE: 5 - 185 MM - OSCILLATING SPEED: 0. 5 - 6 M/MIN QUALITATIVE MACHINE BENEFITS: - DOUBLE STROKES/MIN: 200 MIN - CARRIAG ...
I. Working capacity -Faceplate diameter 2000 mm -Workpiece max. diameter 2200 mm -Workpiece max. height: -under the cross rail 1850 mm -Workpiece max. weight 20 tons II. Movable cross rail : - Stroke on the column 1600 mm - Rapid moving speed 400 mm/min - Slow moving speed 10 mm/min III. Faceplate main drive in the turning mode. -Main drive motor power 60 kW -Faceplate speed range 250 rev/min IV. Working support: -Ram stroke (Z axis) 1500mm -Ram section 250x250 mm -Ram/taper ISO 50 -Tool magazine, tool number 16 (left tool magazine with milling tools and right tool magazine with turning tools or mixed) -Milling shaft drive motor power 37 kW -One tool holder max. Weight 30-70 Kg -Milling spindle speed 1 - 2000 rev/min V. Feeds -X, Z axes working feeds 1 – 6.000 mm -C – axis feeds (faceplate-milling mode) 0,001 + 2, 7 rev /min -Rapid feeds 10.000 mm/min ...
BRAND: WMW YEAR: 2008 MODEL: BP 160 CNC APPLICATION TYPE: BORING LOCATION: SOUTH KOREA MACHINE TYPE: BORING MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: 840D MAIN DRIVE SPINDLE SPEED RANGE: 4 - 2500 1/MIN SPINDLE MOTOR POWER: 100 KW TOOL TAPER: ISO 50 MOVEMENT X-AXIS MOVEMENT: 11000 MM Y-AXIS MOVEMENT: 5000 MM Z-AXIS MOVEMENT: 1200 MM V-AXIS MOVEMENT: 2000 MM W-AXIS MOVEMENT: 1000 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. SPINDLE TORQUE 12,000NM - BORING BAR DIAMETER Ø 160 - RAM SECTION 500 X 620MM - FEED RATE OF X, Y-AXIS 15,000MM/MIN - FEED RATE OF Z, W-AXIS 6,000MM/MIN - ROTARY TABLE SIZE 2,500 X 2,500MM - ROTARY TABLE LOADING CAPACITY 40TONS - FLOOR PLATE SIZE 6,000 X 6,000MM - ATTACHMENT U-TRONIC / 2-AXIS HEAD / ANGLE HEAD / RAM COVER
turning diameter over bed: 400 mm turning diameter over slide rest: 200 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 28 - 1400 U/min centre height: 200 mm spindle bore: 50 mm total power requirement: 10,4 kW weight of the machine ca.: 2,85 t dimensions of the machine ca.: 3,5 x 1,4 x 1,6 m Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 365 mm bore stroke: 200 mm taper MK: 4 MK table-size: 660 mm feeds: ja mm/U turning speeds: 63 - 1000 U/min total power requirement: 2,3 KW weight of the machine ca.: 0,95 t dimensions: 1,2 x 0,8 x 2,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...
round bar steel: 36 mm square edge steel: 30 mm L-beam: 100x10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 255 mm numer of jaw: 3 Stück bore: 82 mm Total height: 130 mm weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: - kg : - weight: - kg 10 off used machine shoes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of ...
diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 700 mm table width: 700 mm table height: 630 mm power capacity: kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 0,9 x 0,8 x 0,7 m partial adjustable cube table - 30° in mint condition, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t distance between columns: 320 mm stroke: 8 - 120 mm table-size: 800 x 600 mm ram surface: 500 x 400 mm throat: 315 mm dayligth: 410 mm ram adjustment: 70 mm no. of strokes: 56 / 90 Hub/min total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions: 2,10 x 1,52 x 2,72 m inclinable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: für Stangen und ... : für dickwandige Rohre working area: 30 - 80 mm Ø main drive: 38 kW : Ein- und Auslauf total wight: 12 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stroke adjustable from - to: 0 - 150 mm faceplate diameter: 300 mm taper MK: für MK6 weight of the machine ca.: 0,05 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table diameter: 2000 mm Turning diameter: 1800 mm Turning height: 1250 mm Motor power: 35 HP/kW Positions ATC: 0 Positions APC: 0 MACH-id 4306 MAKE WMW TYPE DKZ 2000 x 1250 B YEAR 1976 SPECIFICATIONS Max. turning diamter Ø 2000 mm Table / chuck size Ø 1800 mm Workpiece height 1250 mm Work piece weight 6000 Kg Horizontal movement support / ram 1150 mm Stroke support left ram 700 mm Stroke support right ram 700 mm Angle adjustment / ram swivable 30 Spindle speeds / ranges 50 Rpm Power 35 Kw DIMENSIONS Length 4100 mm Width 5300 mm Heig ...
Grinding diameter: 630 mm Grinding length: 4000 mm Workpiece weight: 900 kg CNC Brand: Siemens CNC Model: SIEMENS 840D 4 Axis controlled X, U, Z and C Axis Large steady rest package 6 units Concave grinding Covex grinding Dressing system Rebuild by Primoteq Centre height: 315mm Grinding Ø: 630mm Grinding length: 4000mm Grinding stone dimensions:710 x 80 x 305mm Table inclasement: -5 to + 5° Tailstock: 6Mk Coolant system: Yes Filtration: Yes Length: 12000mm Width: &nb ...
Spindle diameter: 0 mm Longitudinal X: 9000 mm Vertical Y: 4000 mm Cross Z: 1000 mm Positions ATC: 80 Table length: 2500 mm Table width: 2500 mm Number of tables: 1 CNC Brand: Heidenhain CNC Model: TNC 430 WMW - BP 160 CNC Floor type Horizontal borer Ø 160 with Y 4000 mm MACH - ID 6368 Make: WMW Type: BP 160 Control: HeidenHain TNC 430 YOP: 2001 X – Travel 9.000 mm Y – Travel 4.000 mm Z – Travel 1.000 mm W – Travel 800 mm Table Length 2.500 mm Table Width 2.500 mm Table load 30.000 kg Speeds / ranges 2000 Rpm Power 52 kW Ram size 500 x 620 mm Spindle Taper Iso 50 IS ...
Grinding diameter: 315mm, grinding length: 2500mm, center height: 165mm, speed: 500rpm (10 steps), spindle bore diameter/taper: 30mm/MK4, grinding wheel diameter: max. 500mm, table size: 3500mm/310mm, table tilt: approx. 4.8°, longitudinal feed of the table: 5-2680mm, feed: 50-4000mm/rev. Weight: approx. 7400kg, Dimensions X/Y/Z: 6500mm/1700mm/2000mm. Headstock defective, can be repaired.
Projection: 315mm, spindle speeds min.-max.: 9 steps, 63rpm-1000rpm, worktable size: 500mm/400mm, dimensions X/Y/Z: 2300mm/1000mm/700mm, weight: 1000kg. Feed defective.
UBBDA Three Roll Plate Bending Machine The three-roll sheet bending machine is designed for the production of cylindrical and conical sheet shells. Electric motors 42 kW, 580 rpm, 750\1500 rpm Dimensions 12900x5300x5620 Gross weight 166260 t
WMW Heckert 6000 x 1050 mm Cylinder Grinding Machine Table size : 1050X6000 Machine is in very good condition
Clamping angle WMW Clamping area: 200 x 194 x 44 mm Bridge width: 50 / 62 / 46 mm Groove width: 18 / 30 mm Groove depth: 30 mm Mounting area: 200 x 150 x 24 mm used, tested ! Dimensions: 200 x 150 x 194 mm
Clamping table, clamping plate, milling table, machine table WMW Clamping area: 425 x 165 mm Panel thickness: 60 mm Groove width: 12 / 20 mm groove depth: 20 mm web width: 19 / 45 / 45 / 19 mm guide groove: width: 12 mm, depth: 5 mm ( on top and bottom ) hole spacing ( fastening screws ): 365 x 60 mm 4x bore: Ø 14 / 20 mm used, tested ! Dimensions: 425 x 165 x 60 mm
Cutter mandrels, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 tool holder: Ø 22 x 315 mm used ! Dimensions: 468 x 63 x 63 mm
Pneumatic Grinder, Pneumatic Straight Grinder WMW Type 1804 17000 rpm Grinding wheel diameter: Ø 50 mm with approx. 1.6 m Connection hose used, tested ! Dimensions: 330 x 50 x 80 mm
Clamping drive, clamping force generator, electric WMW EDU I80 DR speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 280 x 130 x 170 mm
Milling head, drill head, angle head WMW Tool holder: SK40 with collet chuck size 25 360 ° rotatable in two planes shaft ( Drive , machine side ): SK50 shaft ( drive, milling head side ): Wedge hub profile 8 x 36 x 42 x 8 ( TGL 0-5472 ) flange: Ø 260 mm / 397 x 339 mm hole spacing: 365 / 175 mm 4x Bore: Ø 19 mm used, tested ! Dimensions: 400 x 390 x 600 mm
Clamping actuator, clamping force generator, electric, with reversing switch WMW EDU I80 F/M1 speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 G 4 E 0,75 kW 1380 RPM 220 / 380 V 3AC Hollow Shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! dimensions: 280 x 130 x 190 mm
Clamping actuator, clamping force generator, electric WMW EDU I160 Bj: 1979 torque adjustable in 8 steps max. 110 Nm 160 rpm 220 / 380 V 3AC 0,75 kW spline shaft profile according to TGL 0-5471 for more clamping actuators see MMZ158, MMZ159 !; New ! Dimensions: 280 x 130 x 170 mm
Machine vice WMW SX/1-160 TGL 34180 jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm New ! dimensions ( machine vice ): 505 x 160 x 135 mm
Centering vice, machine vice WMW SZ 160 jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm used, tested ! Dimensions ( machine vice ): 505 x 160 x 117 mm
turning diameter over bed:630 mm turning diameter over slide rest:360 mm turning length:2000 mm spindle speeds::22,5 - 1120 centre distance:2500 mm feeds - cross:0,018 - 1,25 mm/U spindle motor:15 kW total power requirement:18 kW weight of the machine ca.:6,0 t dimensions of the machine ca.:3,6 x 1,4 x 1,7 m - Heidenhain digital readout - rapid traverse - Multifix quick tool change with inserts - faceplate - 2 steaday rests, 3-jaw chuck - splash protection
x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm
bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:100 mm total power requirement:0,7 kW weight of the machine ca.:302 kg dimensions of the machine ca.: 620 x 800 x 1950 mm Table dimensions:350 x 250 mm spindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min
bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm
turning diameter over bed:630 mm turning diameter over slide rest:360 mm turning length:2000 mm centre distance:2500 mm spindle turning speed range:22,5 - 1120 U/min spindle motor:15 kW feeds - cross:0,018 - 1,25 mm/U weight of the machine ca.:6,0 t total power requirement:19 kW dimensions of the machine ca.:4,0 x 1,4 x 1,6 m Machine equiped with: - Heidenhain digital readout - 2 steady rests - rapid traverse - 3-jaw chuck, faceplate - splash cover - Multifix rapid tool changing system
max. workpiece diameter:160 mm min. workpiece diameter:20 mm workpiece length:3300 mm Sawn round material sections are clamped using prismatic hydraulic clamps left and right, and in one operation the two front surfaces can be milled to length and machined with a center hole and/or thread.