advanced search
378 results
New in: 2022
used
Roller width: 350 mmroll diameter: 110 mmRoller covering - soft rubber: 70 Grad shorerubber: NBR - Qualität air pressure: max. 4 barPressure line: 28 N / mmCapacity of dye tub: Becken - 1,3 LiterCapacity of dye tub: Zwickel - 0,3 LiterSpeed driven roll: 0-25 U/minspeed: 1 - 10 m/minvoltage: 230 V / 50 Hzdrive motor: 0,4 kWweight: 130 kgdimensions: 1050 x 800 x 810 mm• 2-roll-laboratory padder for horizontal and vertical roller-arrangement.• The change from horizontal to vertical of the roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders,• small trough• with controllable motor drive, drive for both rolls.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2000
used
Working width: 1800 mmRoller width: 2000 mmCapacity appr.: 20 mHousing from: Edelstahl Guide rollers - dia: 127 mmWeight: 850 kgDimensions (LxWxH): 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2020
used
Working widths: 2000 mmroll surface width: 2200 mmFabric content: 48 Meter0: 160 mmRoller covering: ALU Clouth speed: 20 - 200 m/minCloth tension: 20 - 500 Nvoltage: 400 V / 50 Hzoutput: kwweight: tdimensions of the machine ca.: mcloth accumulator: 48 meters capacityNumber of rolls: 15-axis guide rolls, Ø 160 mm made of aluminumtype of material: double polyamide foil hosematerial thickness: 2 x 15 my to 2 x 50 mymovable roller mill is moved up and down with 4 ball screwsunit was disassembled after test run for transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1981
used
Working width: 1400 mmRoller width: 1600 mmpressure: 40 tPressure line: 250 N / mmNumber of rollers: 2 StückUpper roll: 320 diaRoller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mmRoller covering: Flexroll-Manchon Clouth speed: 30 m/minWeight: 10 todimensions of the machine ca.: 3,0 x 4,0 x 2,5 m• Inlet side with bearing cap for small skeins,• At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working width: 2600 mmRoller width: 2800 mmNumber of rollers: 2 StückSupporting roller - dia: 295 mmRoller covering - soft rubber: 75 Grad shoreSwimming roll - dia: 240 mmRoller covering - synthetic PU: 83 Grad shorePressure line: 50 N / mmPressure total: 14 toCloth guiding system for woven fabrics: Breithalter, Leitwalze Drive side: nach Auftrag Operting side: nach Auftrag Drive shaft: dia 80 mm Hydraulic unit for separately pressure: in inox Compensator: mit pneum. Entlastung • 2-Bowl high efficiency squeezer with one Swimming Roll (S-roll),• Machine had been completely refurbished in 2007,• with drive (with GS-Motor and gear, without control) for V = 60 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2003
used
Working widths: Eingangsbreite 400 mmClouth speed: 20 m/minFabric content: 50 mair pressure - required: 6 barvoltage: 380 V / 50 HzCrushing-machine for getting crush-effects in warp-direction. The cloth is feeded into a funnel by a setting unit.The pneumatical controlled plunger puts the fabrics into the guide tube vertically and horizontally. The fabrics will be pushed into the hose which is slipped over the guide tube and then pressed. Afterwards the closed hose will be treated by saturated steam.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1986
used
Fixing width: 250mm, heating output: 8kW, temperature: 0-250°C, speed: 0-12m/min, with documentation.
New in: 1967
used
Connected load: 2.95kW, without documentation, an inspection is possible, was in use until 2014.
used
Number of winding positions: 840, an on-site inspection is possible.
used
Working width: 2000mm, max. roll diameter: 800mm, length: 2700mm, width: 1250mm, height: 2050mm, weight: 250kg, with documentation, light table for transmitted light, light from above, winding and unwinding, side shift during winding, winding speed adjustable and counter, an on-site inspection is possible, has been regularly serviced, no videos available.
New in: 2001
used
Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air.
New in: 1994
used
New in: 2000
used
Suitable for roll goods, voltage: 220/380V, power connection: 10A, with documentation.
used
There are two identical machines available, machine 1 is missing the table, machine 2 needs service, both are functional, working width: 1800mm, table length: 16,000mm, with documentation, an on-site inspection is possible.
used
Throughput rate: 2500-3000 pieces/h, including spare parts package, raw material can be supplied: approx. 3t of each of the 3 types of fleece, 1.5t of wire and 700kg of ear tape, an inspection on site is possible.
New in: 1988
used
Connected load: 3.5kW, was maintained regularly, an inspection is possible.
used
Drums: 3 pieces, top and bottom 2 pieces, with felt covering, center steel roller heated. Roller width: 3150mm, fabric width: 2890mm, heating: steam-heated, accessories: 2 spare rollers not overhauled.
New in: 2000
used
A WUMAG TEXROLL cylinder dryer for drying and stretching. Drums: 6 pieces, drum diameter: 560mm, TÜV-tested. Roller width: 3000mm, fabric width: 2800mm. Heating: Steam-heated. Including: Tidland braking system, Montalvo tension measurement, hydraulic outlet tension system.
used
Almost unused single needle lockstitch flatbed sewing machine. With needle positioning, XXL vertical hook, foot lift, frame and table top. max. stitch length: 12mm, output: 3400 stitches/min. Dimensions X/Y/Z: 1060mm/500mm/1700mm, sewing head weight: approx. 55kg. Documentation available.
used
There are 8 sewing machines in good condition available. 3x identical 767-FAS-373. 2x identical 467-65-FA-573. 1x 867-190142. 1x 524l-847-75. 1x S524-847-750. All sewing machines including safety clutches, thread cutters and height-adjustable tables and a whole cabinet with spare parts. All sewing machines in working order. The sewing machines are only sold as a package deal. Individual machines cannot be sold separately.