Printing plates firing furnace Eurografica baby; good condition; cleaned and checked. suitable for 4 plates; Max. Plate width 75 cm; new hood shocks; Timer. Plate backing oven Eurografica baby; good condition; cleaned and checked; used for 4 plates, max.plate width 75cm; new lift; Timer.
Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.
Stacklift Polar LW 1200-6; cleaned and tested; 2 pcs.available; Load capacity 1200kg; Format 1050x1480mm. Pile lift Polar LW1200-6; cleaned and checked; two on stock; lifitng capacity 1200kg; size 1050x1480mm.
Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.
Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Stacker EBA 551 LT; good condition; cleaned and tested; Cutting length 550mm; Insert height 92mm; Insertion depth 570mm; Side tables; Air table; Light barriers; Replacement knives; digital display with program. Paper cutter EBA 551 LT; good condition; cleaned and checked; cutting lenght 550mm; hight 92mm; depht 570mm; side tables; air table; photo sensor; secound knife; digital display with program.
Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.
Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.
Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.
Magnetic plates for letterpress; 3x A4 available (format 306x217x22mm); 3x A5 available (format 217x153x22mm); 6x A6 available (format 153x108x22mm).; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Tünkers sheet laminating station 1100; good condition; Manual version; Working width 1100 mm; Feed table; Display band; Format min. 200x280mm, max. 1100x1400mm; Carrier material thickness 250 g / m2-12 mm; Deck material 80 g / m2-800 g / m2. Tünkers sheet laminating machine 1100; manually version; good condition; working width 1100 mm; feed table; delivery belt; size min. 200x280mm, max. 1100x1400mm; base material 250 g / m2-12mm; cover material 80 g / m2-800 g / m2.
Register punch ingestion in RG; Knife 90'new ground; Length of format min. 80 mm, max. 340 mm; format width min. 125 mm, max. 350 mm; max. insert height at the table 40 mm; max. cutting height per punch depending on paper quality approx. 8 mm; tee finger for cutting the layers after the cutting process; Machine is serviced and tested by the Infusion Customer Service; other tools on request. Register punch infusion RG; knife 90'new sharpened; min.lenght 80mm, max.340mm; width min.125mm, max.350mm; hight max.40mm; max.cut hight8mm; checked by the support of Tränklein germany; other tools on request.
Block glue press Müro 5000/A3 TM; good condition; cleaned and tested; Table equipment; Format A3; Stack increase. Padding press Müro 5000/A3 TM; good condition; cleaned and checked; table top machine; size A3; Pile elevation.
Nordson 3100-2AA32; State as is; only checked for function; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Shaking table Horizon PJ 88; good condition; cleaned and tested; Stand- device; Format B6-A3; Insertion height max.100mm; Tilt adjustable; there are 2 devices available. Jogger Horizon PJ 88; good condition; cleaned and checked; floor mounted machine; size B6-A3; max.pile hight 100mm; adjustable in inclination; two machines on stock.
XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Hercules Elite with online development G+J ML 860; good condition; cleaned and checked; with HQ RIP.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Schmedt Praecoll; good condition; 2.glue basin; Block width 110-450mm; Block height up to 345mm; Blockstaerke up to 82mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Two-roller gluing machine for the processing of cold glues. Same glue application by changing the distance between the two rollers to each other. width 350 mm. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.