mandrinadoras y centros de mecanizado usadas para la venta

x-travel:800 mmy-travel:600 mmz-travel:500 mmturning speeds:15000 1/mintool change unit:30 tool adaptor:HSK 63 control:iTNC 530 HEIDENHAIN table load capacity:250 kgrapid traverse:30 m/minspindle drive:19 / 10 kWtotal power requirement:41 kVAweight of the machine ca.:8,5 tdimensions:3,4 x 2,7 x 2,9 m5-axis-simultaneously machining center,NC rotary- swivelling table, A-axis +-110°, C-axis 360°,rotary table Diameter D = 280 mm, side clamping plates,electronic Handwheel Heidenhain HR 410,infrared touch probe HEIDENHAIN, electronic Compensation of thermal expansion,air blast outside,air blast through spindle,flush gun,standard coolant,no internal coolant supply,chic through no chipconveyor,cabin roof,prepared for oilmist suction,approx. 25.000 h "machine on. approx. 8.000 h "spindle on"

x-travel:2600 mmy-travel:700 mmz-travel:700 mmtable surface area:2900 x 700 mmrotary table diameter:750 mmtable load:500 kgcontrol:HEIDENHAIN iTNC 640 turning speeds:20 - 15.000 1/mintaper ISO:SK 40 tool change unit:120 Pos.rapid traverse:40 m/minspindle:23,5 / 13,5 kWtotal connected load:56 kVAweight of the machine ca.:16 tdimensions of the machine ca.:6,0 x 3,4 x 3,0 m5-axis simultaneously universal machining center,installation date 6th December 2018rigid table with integrated NC-rotary table (left) and B-axis in milling head,direct measuring system,Swarf Conveyer,3D Touch probe HEIDENHAIN TS 649,el. handwheel,internal coolant supply 40 bar,Flush gun,mode 4,safety device (for power failure),ERGOLINE control 19"reading hours:approx. 25.500 h "machine on"approx. 7.500 h "program on"approx. 8.100 h "spindle on"

x-travel:800 mmy-travel:840 mmz-travel:865 mmtotal power requirement:24 kWweight of the machine ca.:15,5 tdimensions of the machine ca.:4 x 3 m5 axes, 1 spindle A axis -30TO + 210 DEGB axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpmmax. torque = 34.6 Nm Tools:HSK-A63 87 places in the magazine

x-travel:800 mmy-travel:840 mmz-travel:865 mmcontrol:Siemens 840 D spindle speeds::10.000 rpmspindle drive motor:20 kWweight of the machine ca.:16 tdimensions of the machine ca.:4 x 3 m4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine

x-travel:735 mmy-travel:650 mmz-travel:560 mmRotary-table:680 mmtable load capacity:600 kgtool taper:HSK 63 spindle drive:35 / 24 kWturning speed range - stepless:18.000 1/minnumbers of positions in the tool changer:60 Pos.control:SIEMENS 840D solutionline FD operate total connected load:65 kVAtransport dimensions LxWxH:4,0 x 2,45 x 2.85 mspace requirements approx. LxWxH:5,0 x 4,0 x 3,5 mweight of the machine ca.:12 t5-axis CNC universal mill-turning center, simultaneously,NC-mill-rotary table D= 650 mmmm,rotary table 1.000 rpm,mode 4,3D probe infrared HEIDENHAIN TS 649,BLUM-laser,internal coolant Supply 40 bar , 600 l, MPC( machine protection control ), DMG netservice,flushgun 2 bar,chipconveyorapprox. 15.200h "machine on", approx. 4.900h "spindle on"

:VF 108 x-travel:1080 mmy-travel:600 mmz-travel:600 mmdistance spindle center to column:630 mmdistance spindle center to table:100-700 mmtable-size:1280x600 mmtable load:1000 kgT-slot (width-distance-quantity):18x100x5 mmspindle nose:A63 HSKspindle speed max.:15000 U/minspindle drive:7,5/27 kWmax. torque on the spindle:55/100 Nmrapid traverse in x-y-z axis:36/36/24 m/minmilling feed range:1-10.000 mm/minTool changer:24 fachmax. tool length:300 mmmax. tool weight:8 kgmax. tool diameter:80|130 mmpositioning accuracy:+/- 0,01 mmrepeating accuracy:+/- 0,008 mmtotal power requirement:30 kWMachine size (LxWxH):4920x3510x2970 mmweight of the machine ca.:7,25 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 m ... más información

Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 610, Y axis: 510, Z axis: 410, CNC type: Fanuc, Spindle revolutions: 6000

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

spindle diameter:110 mmx-travel:1600 mmy-travel:1000 mmz-travel:1250 mmw-axis:Ausfahren der Spindel: 400 mmB-axis (table):360 x 1° mmDistance table/spindle center:0-1000 mmtable load:2,5 ttable-size:1000x800 mmT-slot (width-distance-quantity):22H8 x 7 x 100 mmtool taper:50 ISOspindle turning speed - stepless:2 Stufen: 20-1000 1/minfeeds:X/Y/Z-Achse: 3-950 mm/minfeeds:W-Achse: 3-400 mm/minrapid speed:X/Y/Z-Achse: 2,8 m/minrapid speed:W-Achse: 2 m/minmain drive:15 kw (drehzahlgeregelt) feed motors:X/Y/Z-Achse-Servomotoren: 2,9 kWFeed motor:W-Achse-Servomotor: 1,3 kWrange L-W-H:3.874 x 4.317x3.715 mmweight of the machine ca.:12 ttotal power requirement:20 KVAAutomatic tool clamping:pneumatisch ball screw in axes:X/Z/W CNC controls from:Siemens/Fanuc/Fagor

bore capacity in steel St 60: 25 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2x14x224 mmdistance spindle - column min./max.: 132/724 mmfeed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min.engine: 1,0/1,6 kWvoltage: 400 VStandard equipment:- 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max.6 threads/min (thread cutting capacity depending on spindle speed), thread d ...

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

spindle diameter:160 mmx-travel:6000 mmy-travel:5000 mmz-axis:1500 mmdimension of the ram:470 x 500 mmw-axis:900 mmspindle taper ISO:50 spindle turning speed range:1 -3000 U/minspindle motor:71 kWfeed speeds:1 - 5000 mm/minrapid speed:25 m/mintotal power requirement:187,6 kWdimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 mMachine in mint condition !with CNC control HEIDENHAIN iTNC 530autom. toolchanger 80 - pocketsCNC Rotary Table 4000 x 4000 mm max. table load 75 to.longitudinal movement V-axis 1500 mmautom. head changerwith universal Milling Headuniversal high speed milling head 5-axis 18000 rpmRENISHAW measuring probebelt filtering unit and through spindle coolantchip conveyor

spindle diameter:130 mmx-travel:10000 mmy-travel:2500 mmz-axis:800 mmw-axis:750 mmspindle taper ISO:50 spindle turning speed range:1 - 3000 U/minpower maindrive:37 kWfeed speeds:1 - 6000 mm/minrapid speed:15 m/mintotal power requirement:90 kWwith CNC control HEIDENHAIN TNC 430- automatic toolchanger 60-pockets- NC rotary table 2500 x 2000 mm max table load 20 to.- longitudinal movement table 1500 mm- floor plate 5000 x 2000 mm, angle clamping plate, chip conveyor- coolant attachment with through spindle coolant 30 l/min. 20 bar

x-travel:3000 mmy-travel:1000 mmz-travel:1200/1300 mmspindle taper ISO:50 spindle turning speed - stepless:20 - 8000 U/minpower main drive with:40% / 52 kWfeed speeds:1- 30000 mm/minrapid speed:30 m/minweight of the machine ca.:34 tdimensions of the machine ca.:8,5 x 7,25 x 3,95 mwith CNC Steuerung SIEMENS 840 D autom. toolchanger 60-pocketsNC Milling Head +/- 105 Grad stepless or indexing positioning with clamping 2400 Nm / 4200 NmCNC-table hoirzontal Sempuco SKV-NC 7/600 with zero point clamping fixture2 component bridges 1500 and 2000 mmmax. component weight with counter spindle 3200 kg, cnetre height 410 mm, face plate diameter 600 mm autom. doors, coolant attachment through spindle coolant 40 bar, chip conveyor

x-travel:2500 mmy-travel:1000 mmz-travel:750 mmtable surface area:3220 x 1000 mmWorkpiece weight approx.:3000 kgspindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/minfeed speeds:1- 30000 mm/minrapid traverse:30 m/mintotal power requirement:40 kWdimensions of the machine ca.:6,9 x 4,1 x 3,7 mweight of the machine ca.:21 twith CNC HEIDENHAIN TNC 42630-pockets autom. toolchangerRENISHAW measuring probecoolant attachment and chip conveyordiverse toolholders

Modell:RB 50 | RB 63 | RB 80 bore capacity in steel (diameter):50 | 63 | 80 mmarm length:1600 | 2000 | 2500 mmworkpiece height max.:1220 | 1600 | 2000 mmDistance between spindle and column, max.:1600 | 2000 | 2500 mmDistance between spindle and column, min.:350 | 400 | 450 mmspindle taper MT:5 | 5 | 6 MKspindle turning speed range:25-2000 | 20-1600 | 16-1250 U/mintransmission ratio:16 Stk.feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/mindice table:630x500 | 630x800 | 800x1000 mmpower capacity:4 | 5,5 | 7,5 kWWeight approx.:3500 | 7000 | 11000 kgMachine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mmcube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stückslots with screws:6 Stückreducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loadingwarranty:12 months

:RB 100 | RB 120 bore capacity in steel (diameter):100 | 125 mmarm length:3150 | 4000 mmdistance spindle center to floor plate:2500 | 2500 mmdistance spindle center to table:min. 750 mmspindle stroke:500 | 560 mmDistance between spindle and column, max.:3150 | 4000 mmDistance between spindle and column, min.:570 | 600 mmspindle taper MT:6 MK | Metrisch 80 spindle turning speed range:8-1000 | 6-800 U/mintransmission ratio:22 feed range:0.06-3.2 mm/mindice table:800x1250 mmpower capacity:15 | 18,5 kWWeight approx.:20000 | 28500 kgMachine size (LxWxH):4780x1630x4720 | 5817x2150x5120 mmpayment: 100 % before loadingwarranty:12 months

spindle diameter:105 mmx-travel:2000 mmy-travel:1600 mmz-travel:1600 mmW-axis (spindle longitudinal):700 mmspindle taper: ISO:50 Speed of boring spindles:5 - 2000 U/min.b-axis:360 °Table area:1200 x 1500 mmworkpiece weight:5000 kgfeed speeds:2 - 4000 mm/minrapid traverse:6 m/mintotal power requirement:65 kWweight of the machine ca.:17 tdimensions of the machine ca.:6,5 x 4,6 x 3,9 mCNC HEIDENHAIN TNC 426working area protectioncoolant attachment

x-travel:610 mmy-travel:580 mmz-travel:580 mmdistance spindle nose and table:70-650 mmdistance spindle center to table:80-660 mmtable height over floor:1150 mmpallet table size:400x400 mmmax. workpiece weight:400x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:9500 kgCNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barServo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/F ...