- (47)
- Acuñadoras de moneda (1)
- Empacadoras (3)
- Laminadoras de anillos (1)
- Máquinas automáticas de estampar y conformar de dos montantes (1)
- Otras prensas de manivela (2)
- Otras prensas excéntricas (1)
- Otras prensas hidráulicas (7)
- Otras prensas mecánicas (4)
- Prensas articuladas de uno a tres montantes (4)
- Prensas automáticas de estampación (20)
- Prensas de conexión de esquinas (9)
- Prensas de corte (3)
- Prensas de cuatro pilares (8)
- Prensas de doblado entre matrices (5)
- Prensas de embutición de doble montante (4)
- Prensas de embutir de dos montantes (1)
- Prensas de estampación de precisión (6)
- Prensas de extensión profunda (2)
- Prensas de forja de precisión horizontales (4)
- Prensas de gran velocidad (13)
- Prensas de husillo (19)
- Prensas de husillo con accionamiento electromecánico (5)
- Prensas de husillos de fricción (3)
- Prensas de huso manual (9)
- Prensas de la asamblea (1)
- Prensas de manivela (11)
- Prensas de manivela de cuatro puntos (1)
- Prensas de mesa neumáticas (4)
- Prensas de palanca acodada de un montante (10)
- Prensas de prensado (20)
- Prensas de talleres (60)
- Prensas de un montante (10)
- Prensas de varios escalones para la conformación maciza (1)
- Prensas desbarbadoras (6)
- Prensas dobladoras y enderezadoras (6)
- Prensas enderezadoras (20)
- Prensas ensambladoras por presión (1)
- Prensas excéntricas (98)
- Prensas excéntricas de doble montante (8)
- Prensas excéntricas de dos montantes (4)
- Prensas excéntricas de un montante (107)
- Prensas hidráulicas (82)
- Prensas hidráulicas de bastidor de columnas (3)
- Prensas hidráulicas de corte de precisión (3)
- Prensas hidráulicas de doble montante (12)
- Prensas hidráulicas de dos montantes (7)
- Prensas hidráulicas de embutir de un montante (4)
- Prensas hidráulicas de forja (2)
- Prensas hidráulicas de mesa de un montante (2)
- Prensas hidráulicas de un montante (24)
- Prensas hidráulicas marmoleadoras y de ensayo para herramientas (9)
- Prensas horizontales (7)
- Prensas mandrinadoras (1)
- Prensas manuales (4)
- Prensas mecánicas (19)
- Prensas neumáticas (13)
- Prensas oleohidráulicas (1)
- Prensas para bulones (1)
- Prensas para entintar (18)
- Prensas para la fabricación de puntas de Paris (1)
- Prensas para usos especiales (1)
- Prensas transfer (de 2 a 4 montantes) (3)
- Prensas-estampa (3)
- Prensasde palanca acodada (9)
- Rebordeadoras (136)
- Rebordeadoras CNC (8)
- mais
- A+B FASTECH (3)
- A. U. SÖHNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (6)
- AIDA (2)
- AMADA (17)
- AMBOLD (11)
- AP+T Lagan (2)
- ARISA (1)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (4)
- AYEL-TECH (15)
- BAIER (1)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (3)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (5)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BLÄTTNER/EITEL (1)
- BMW (1)
- BOLDRINI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (13)
- BRUNNHUBER (1)
- BRÜCK (1)
- BUCHER-GUYER (1)
- BURGER (1)
- Bussmann (3)
- BYSTRONIC (5)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CEPSA (1)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CIDAN (1)
- CLEARING (1)
- CoastOne (4)
- COLLY (6)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CORNADO (1)
- CRIMPONE (1)
- DAKO (1)
- DARLEY (4)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (15)
- DUNKES (21)
- DURMA (6)
- DURMAZLAR (1)
- EBU (23)
- ECAI (1)
- Eckold (25)
- EDEL (1)
- EDELHOFF (7)
- EHT (21)
- EIGEN (1)
- EIGENBAU (1)
- EISENWERK HENSEL (1)
- EITEL (9)
- ELBARON (1)
- ELUMATEC (6)
- EM HART, TUCKER (1)
- EMANUEL (1)
- Enerpac (2)
- ... mais
Fabricante:
(Categoria: 106)
Ano de construção: 1965
usava
Machine type: Eccentric press Manufacturer: GRÖTZINGER Model: 15 t Built: 1965 Condition: good Offer type: used machine Technical data: Pressure force: 15.0 t Extension: 120 mm Table: 460 x 255 mm Installation height: 250 mm Drive: 1.6 kW Remark: infinitely variable speed adjustment Weight: 750 kg The machine is in a good and ready-to-use condition and can be visited and demonstrated by us. We would be happy if our offer finds your interest.
Ano de construção: 1965
usava
Article number: 13-20-001 Manufacturer: Schuler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1965 L x W x H: approx. 1200x1800x2400 Weight: approx. 2500kg Compressive force: approx. 25000kg Stroke of ram: approx. 8-59mm Max. installation height: approx. 550-1150mm Power requirement: approx. 1.5 hp Other accessories on request Price and other technical data on request
Ano de construção: 1965
usava
pressure:20 tStroke:230 mmtable surface area:Ø600 mmdistance table - lower edge of ram:770 mmweight:595 kg ... mais informação
Ano de construção: 1965
usava
Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm ... mais informação
Ano de construção: 1965
usava
Ano de construção: 1965
usava
Power of parallel/offset crankshaft: 30t/2x20t, stroke: 50mm, clamping surface: 230mm/460mm, face of tappets: 2x 30mm/110mm, average of clamping journals: 38mm. Max./min. Opening front dead center: 240mm/180mm, ejection distance: 24mm. Max./min. Band width: 80(100)mm/10(5)mm, max. feed: 120mm. Running speed: 60-180rpm, drive pulley diameter: 180mm, gear reduction: 1:4, documentation available.
Ano de construção: 1965
usava
Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t. ... mais informação
Ano de construção: 1966
usava
throat: ca. 300 mmstroke: ca. 200 mmpressure capacity max.: 35 tdie cushion hydr. pressure/stroke: 15 ttotal power requirement: 5,6 kWweight of the machine ca.: ca 2,5 tdimensions of the machine ca.: 1 x 0,9 x H 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ano de construção: 1966
usava
Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t
Ano de construção: 1966
usava
Ano de construção: 1966
usava
Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min. ... mais informação
Ano de construção: 1966
usava
pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:110 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 460 mmhole in the table:250 x 150 mmtable height over floor:700 mmtable adjustable:230 mmram surface:355 x 120 mmram adjustment:70 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):1,0 x 1,5 x 2,05 mclutch:rolling key overload protection in ram:mechanical
Ano de construção: 1966
usava
pressure:063 tthroat:450 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:720 x 800 mmhole in the table:280/250 mmtable height over floor:800 mmpassage to the back:290 mmram surface:450 x 280 mmram adjustment:63 mmpower requirement:7,5 kWweight:4,7 tdimensions (WxDxH):1,3 x 2,0 x 2,65 mclutch:pneumatisch overload protection in ram:mechanisch
Ano de construção: 1966
usava
pressure: 100 tthroat: 410 mmstroke: 8-112 mmno. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mmtable surface area: 950 x 700 mmram surface: 700x450 mmhole in the table: Ø 280 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,0 tdimensions of the machine ca.: 1400x2200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ano de construção: 1966
usava
Eccentric press Manufacturer KRS (Kurt Rompel Solingen) Type EPV50, YOC 66, Printing capacity 50 t, Plunger stroke 80 mm, Weight approx. 2.500kg UVV Test Book Machine fully operational ... mais informação
Ano de construção: 1966
usava
pressure:200 tdistance between columns:1100 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:250 mmdie cushion area:800 x 750 mmtable height over floor:800 mmram surface:1000 x 1000 mmSpeed down:400 mm/sspeed up:250 mm/sworking speed:22 - 56 mm/spower requirement:45,0 kWweight:24,0 tdimensions (WxDxH):2,4 x 1,5 x 5,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
Ano de construção: 1967
usava
pressure: 800 tdistance between columns: 600 mmstroke: 65 mmram - range of adjustment: 50 mmtable surface area: 590x650 mmram surface: 590x450 mmno. of strokes: 45 Hub/mintotal power requirement: 22 kWweight of the machine ca.: 18 tdimensions of the machine ca.: BxTxH 1700x2600x3100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ano de construção: 1967
usava
pressure: 63 tthroat: 280 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 620x500 mmram surface: 310x260 mmhole in the table: Ø 250 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1200x1900x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ano de construção: 1967
usava
Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000
Ano de construção: 1967
usava
pressure: 63 tthroat: 330 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 850x600 mmram surface: 550x360 mmhole in the table: Ø 240 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 1300x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.