trabajo con chapas de metal usadas para la venta

Hydr. Guillotine Shears Impact Scissors Scissors Cutting Manufacturer: DURMA Model HGS 3006 Year of construction 2003 max. cutting length 3100 mm max sheet thickness ST 40 6 mm Distance between uprights 3100 mm Digital position indicator for backgauge Backgauge motorized 20 – 800 mm Cutting gap adjustment by hand Strokes per min 14 pcs. Hold-down 14 pieces Engine power 11 kw Machine weight 5500 kg Space requirements: width 3750 mm depth 2350 mm height 1650 mm Foot switch Angle stop Front support arms Backgauge motorized The machine is in good condition and is ready for immediate use. The machine runs very smoothly and cuts cleanly. Forklift available, free loading truck Shipping by freight forwarder possible Location of the machine 48324 Sendenhorst

3- Roll sheet metal bending machine Make: FACCIN, Type: 3 HEL, Year of manufacture: 2009, Roller is only suitable for tapered bodies, Roller width 3000 mm, Length 5000 mm, Width 2000 mm, Height 2100 mm, Side roller diameter 300 mm, Sheet thickness when bent 18 mm, 3 straightening rollers, Bending speed 0-5 degrees/sec., Power 20 KW, Machine weight 13000 kg,

with segmented upper beam H = 110 mm CNC control with motor depth stop Back gauge approx. 1000 mm 3200x2.0 mm, 3.0 mm aluminum, 1.25 mm front Colour: grey Total power requirement: 16 A Motor power: 2.2 kW Opening width: 200 mm LZ: 6 - 8 weeks, machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Double bending machine with 2 BW with CNC backgauge 8 grippers Conical bending m. Security system fence and light barrier bending up and down reduces sheet metal handling to a minimum Free space 300 degrees in front of the stringers for max. bending flexibility Servo controlled motor Scratch-free bending up and down m. 20" Touch PC/400V/Bendex: Machine Software 3200 mm x 1.5 mm, 2 mm aluminium, 1 mm stainless steel Back gauge: 6.5 - 750 mm Projection: 750 mm Colour: grey/yellow Total power requirement: 3 kW Insertion depth: 750 mm without roller scissors Number of stands: 3 pieces without cutting device for cutting to length Bending angle: 300 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with deer's foot tool Sharprail Motorized bending beam lowering Motor lower cheek lowering Opening width: 180 mm Bending angle: 145 degrees 3280x3.0 mm Back gauge: 10-1550 mm Colour: grey/yellow Dimensions: 4220 x 2220 x 1850 mm Weight: 4400 kg Machine Number: 270203/32/4 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out

Machine is in stabilized welded construction 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail Brush table Upper beam with water rebate groove Oil filling Fastening and levelling material Emergency stop rail over the entire length of the machine, integrated emergency stop operation in the foot pedal for upper and bending beam 2. Foot pedal for 2-man operation Upper cheek protection 2 short-part clamping fingers 8000x3.0 mm, 4.0 mm steel, 2.0 mm aluminum Back gauge: 150 - 1150 mm Colour: light blue/light grey Total power requirement: 400 V Insertion depth: 1150 mm Positioning speed: 250 mm/sec without roller scissors Number of stands: 9 pieces Bending angle: 145 degrees

Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80  ...

SAFAN SMK-L-25-1250 -TS1 Press brake CNC/NC Touchscreen - window, colour, graphics, menu in German. Bending length: 1250 mm; Stroke: 115 mm; Between the columns: 1250 mm; Pressure: 25 tonnes CNC control - 2D simulation, language: German - Y1 controlled axes; Y2; X; R(pneumatic). Tools: Tool set Drive: 6 kW; Dimensions: 1900x1800x 2050 mm, Weight: 2250 kg Complete documentation, in German language Power 25 T Folding length 1250 mm Stand width 1250 mm CNC TS1 Stroke 115 mm Drive power 6 kW -------------------      Length x width x height 1900.0 × 1800.0 × 2050.0 Weight: 2250 kg Year of construction: 1996      Good condition Last inspection 03.2023

Description: Rod bending and cutting machine Serial number 46215650607 Table dimensions: 950 x 600 mm Platen speed: 7.8 Rpm See capacities in attached pdf Foot pedal operatedweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 750 x 1,000 mm ... más información

Description: Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Bandwidth 100 mm Band length 1250 mm Pipe diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.18 t Space requirement approx. 1.2 x 0.6 x 1.3 mweight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 1,300 mm

Description: Pipe grinding / Burnishing - for sanding, satin finishing, and high-gloss polishing - large wrap angle of 270 ° for efficient work - Belt speed continuously adjustable - flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimensions 40 x 760mmweight approx.: 4 kg, Approx. Onsite Dimension. (l x w x h): 60 x 220 x 180 mm

Description: Hand bending machine Flat iron 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Pack size max. 51 x 31 x 22 cmweight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 510 x 310 x 220 mm ... más información

Description: Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English) Bandwidth 100 mm Belt length 2000 mm Tube diameter 16.5 - 76 mm Angle adjustable from - to 0 - 65 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.17 t Space requirement approx. 1.3 x 0.7 x 1.1 mweight approx.: 170 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,100 mm

Description: 'Pipe grinding machine with 11 sanding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm Pipe clamping area 170mm Documentation (English) Bandwidth 200 mm Belt length 1600 mm Pipe diameter 38 - 170 mm Connection voltage 400 V Total power requirement 3.0 kW Machine weight approx. 0.25 t Space requirement approx. 1.4 x 0.8 x 1.35 m'weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,350 mm

Description: Unused item: Power: ,380 v  ,dimensions: length 750 mm, width 500 mm, height 950 mm. Weight: 220 kg.  , Hydraulic pipe pressweight approx.: 220 kg, Approx. Onsite Dimension. (l x w x h): 750 x 500 x 950 mm ... más información

Description: Set of 5 manual tube bending machines Different sizes New and unused weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm ... más información

Description: Comes from an industrial company that had to restructure its production and currently has no work for this machine. , It has not been working for about a year, but in February 2024 it was put into operation and you can see the videos they made on this date.  ,It can be visited by appointment. Serial Number: 255 - 251 Max. capacity: 200 kn Nominal Curent: 40A Power: 400 v, 50hz Installed power: 20 kw Overall response time: 450 ms Minimun separation distance: 1,6 m Widthc guarded area: 30 m (maxi) Stopping time : 430 ms Stopping distance: 190 mm CNC: FANUC 18P 31 Turret Station Turret Rotation: 30 rpm Max sheet dimensions: 1270x1270 mm Max sheet thickness: 6 mm Feeds. Rapid feeds:  ,X+Y: 82 m/min Automatic loading: No Working hours 2187h (según contador) CE standard weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 5,030 x 2,630 x 2,160 mm

Inv. Num. : 7597 Type: Bylaser 2200 M Producer: Bystronic Created: 2006 Parameters: Laser power: 2.2 kW Work table length: 3000 mm Work table width: 1500 mm Machine weight: 1100 kg  ... más información

Container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device-Container turning device: 2x roller blocks without drive-Rolls Ø 360 x 170 mm-Roller spacing: 485 - 1240 mm-Dimensions: 980/500/H1045 mm each-Weight: 603 kg/pc.

- Model: Niehoff M30s 17A - Year of Repowering: The electrical panel was upgraded in 2021 with modern components to enhance performance. - Year of manufacturing: 1970 - Voltage: 440V - Motor Power: 50 HP - Variable Frequency Drive: Schneider 75 HP, 440V - Lubrication System: 3 HP recirculating motor pump - State: Installed and functioning - Location: Bogotá, Colombia