trabajo con chapas de metal usadas para la venta

coil internal dia.: 260-600 mmcoil width: ca 150 mmOverall size: 800x1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Range of sheet thickness, mm - 0.7-6; Maximum sheet width, mm - 1250; Striker stroke speed beats / min - 100 Set of lower and upper knives 90mm 25mm; Automatic sheet feeding system; Table with rollers for easy sheet feeding; Centralized lubrication system; Counter of working strokes; Automatic stop system when reaching the border of the sheet; NC controller

NEW MACHINE – READY FOR INDUSTRY 4.0 ESA S640 CNC control Cutting length mm 3070 Nominal thickness mm 10 Frontal protections with photocells Pneumatic sheet support Cutting thread Cutting angle adjustment 0.50° – 2.00° Rear register stroke mm 1000 Shots at 1 minute 12-18 Main engine power kW 22 Approximate weight 11000 kg Use and maintenance manuals

Guillotine shears - hydraulic Make Atlantic Type ATS 3012 Year of construction 1990 Sheet width 3050 mm Sheet thickness 12 mm Distance between columns 3100 mm Table height above floor 900 mm Cutting angle adjustment 0.5 - 3 ° Number of strokes 6 - 13 strokes/min Back gauge - adjustable 1000 mm Hold-down device 18 pcs Oil capacity 350 l Total power requirement 22.5 kW Machine weight approx. 8 t Machine dimensions L x W x H 3.96 x 2.10 x 2.22 m accessories electr. backgauge, spare blade

Baykal HGL 3100x6 NC Guillotine Shear Cutting length : 3100 mm Cutting thickness : 6 mm Machine is in good condition Can be sold together with following press brake : https://www.exapro/durma-ad-r-30100-p230110114/ ... más información

Ermak Power-Bend Pro 2100 x 60 Machine is like new Bending length : 2100 mm 60 Ton Axes : 4 (Y1,Y2,X and Z) ... más información

Hydraulic press brake: HACO type PPM 2075, date: 2006. Bending length: 2050 mm; Between columns: 1750 mm Loading: 200 mm, stroke 130 mm; Pressure: 75 t Conventionally controlled press, electronic readings, setting the stop and bending angle using buttons on the desktop. YX steered axes. Machine weight 4 tons. Drives 6.5 kW. Amada system tools - set - 4-slot matrix 60x60 mm + universal punch, bending C-section 10x10x10 mm. Full Operation and Maintenance Manual, BiHP position manual in Polish.

Description: Hydraulic press for crimping hydraulic pipes, equipped with all the necessary matrices for pipes from 0. 5 to 50 mm, never used 0 hours packed in wooden crateweight approx.: 310 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,400 mm ... más información

Description: Hydraulic press for crimping hydraulic pipes, equipped with all the necessary matrices for pipes from 0. 5 to 50 mm, never used 0 hours packed in wooden crateweight approx.: 270 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,000 mm ... más información

Description: Hydraulic press for crimping hydraulic pipes, equipped with all the necessary matrices for pipes from 0. 5 to 50 mm, never used 0 hours packed in wooden crateweight approx.: 270 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,000 mm ... más información

Description: Hydraulic press for crimping hydraulic pipes, equipped with all the necessary matrices for pipes from 0. 5 to 50 mm, never used 0 hours packed in wooden crateweight approx.: 310 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,400 mm ... más información

Description: PUNCHING Punching force: 55 ton Punching capacity: Ø22 x 18 mm (diameter x thickness): Ø50 x 8 mm  , Punching channel flange (height): 180 mm Throat depth: 510 mm Maximum stroke length: 100 mm Cycles/Min. (20 mm stroke): 28 Table dimensions (W x D): 700 x 700 mm Working height up to mould: 1050 mm  , OPTIONAL TOOLS. Largest bore: Ø160 x 3 mm optional tooling Single V-bending press (W x T): 250 x 15 mm optional tooling Multiple V-bending press (W x T): 500 x 5 mm optional tooling Angle bender: 102 x 9 mm optional tool Rectangular notching machine (W x D x T): 63.5 x 90 x 8 mm optional tool V-shaped notching machine (L x W x T): 145 x 145 x 6 mm optional tool Pipe notching machine (maximum diameter): Ø 100 mm optional tool Flat bar shearing: 175 x 7 mm optional tool Corner shearing: 100 x 100 x 7 mm optional tool Blanking of round bars: Ø 32 mm optional tool Squar ...

Description: PUNCHING Punching force: 60 ton Punching capacity: Ø22 x 20 mm (Diameter x Thickness): Ø40 x 11 mm Throat depth: 200 mm Maximum stroke length: 40 mm Cycles / Min. (15 mm stroke): 34 mm Working height up to mould: 1050 mm  , ANGULAR CUTTING Cutting force: 60 ton With 90° cut: 100 x 100 x 8 mm Working height: 1070 mm  , FLAT SHEAR Flat bar shear: 350 x 15 mm Blade length: 360 mm Working height: 805 mm  , BAR SHEAR Shear for round bars: ø40 mm Shear for square bars: 38 x 38 mm Cutting channels: 102 mm optional tool I-beam cutting: 102 mm optional tool NOTCHING Rectangular notching (W x D x T): 50.8 x 90 x 8 mm V-cut (L x W x T): 90 x 90 x 8 mm optional tool Working height: 1050 mm  , SPECIAL TOOLS optional  , Single Vee press brake (W x T): 160 x 8 mm tool optional Multi Vee press brake (W x T): 250 x 6 mm tool optional Angle bending: 65 x 8 mm optional  ...

The machine is in working order and has many accessories Programmable up to 10 folds. dies up to 50 mm Matrices of: 20, 25, 30 and 50 ... más información

Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674 ... más información

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27500 €: 558.25 €: 2050 mm: 4 mm: 4 mm: 3 mm: 3 mm: 2 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3800 mm: 1150 mm: 1110 mm: 2450 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdown holder: 14 Stückno. of strokes: 20 Hub/mincutting angle: 1.2 °control: CYBTOUCH 6 work height max.: 800 mmoil volume: 150 ltr.total power requirement: 11.0 kWweight: 5500 kgrange L-W-H: 4000 x 2410 x 1610 mm Machine was in a hardware store current new price approx. 42.000 euros Special price on request-------------------------------------------------- Robust electro-hydraulic CNC swing cutting shears including CYBELEC CNC touch screen control including CNC electro-hydraulic cutting gap adjustment-------------------------------------------------- Furnishing:- CNC electro-hydraulic swing cutting shear- including CYBELEC CNC touch screen controller, model CybTouch 6”- some functions of the CNC control: Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material s ...

sheet width: 1620 mmplate thickness: 3 (4) mmpre-bending: nein/no roll diam. toproll: 110 mmroll diam. bottom roll: 100 mmplate thickness: großer DM = 4 mmweight of the machine ca.: 500 kgdimensions of the machine ca.: 2,2 x 0,7 x 1,2 mManual 3-roller round bending machine in a symmetrical roller arrangement, with 2 adjustment spindles on the right and left for the top roller, hand crank for right and left movement of the rollers, foldable roller bearing for removing the tubes.The sheet thickness refers to 380 N/mm² strength. The bending performance could also go up to 4 mm because the top roller has a diameter of 110 mm.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet thickness - max.: 1,5 mmRoller stands: 7 Profile height max.: - mmspeed: 15 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 260 kgdimensions of the machine ca.: 1,5 x 0,6 x 1,15 mElectric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set.Selling due to owners illness and retirement.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production date: December 2011 Hours of operation: 67000 Current condition: very good, used in production For the past 3 years, it has worked in 2 shifts on sheets from 0.5mm to 2mm Tonnage: 20 metric Press controller system: servo-driven (not hydraulic) Maximum thickness: 3.2mm or 6mm with dense brush or ball table Travel range (without repositioning): 1270 mm x 2500 mm Maximum feed speed: - X axis: 80 m per min - Y axis: 60 m per min Maximum material weight: - 50 kg (F1 speed) - 150 kg (speed F4) Maximum number of strokes: 900 strokes per minute Punching accuracy: ± 0.1 mm Turret rotation speed: 30 rpm Automatic indexing speed: 60 rpm Turret stations: 45 stations (including 4 auto-index) NC control: AMNC / PC Power requirement: 19 kVA Maximum air consumption: 750 Nl Machine weight: 13 tons Included: - Amada AE2510NT punching machine - Isolation transformer a ...