- (3)
- Afeitadores de engranajes (1)
- Desbarbadoras (1)
- Desbarbadoras de engranajes (4)
- Fresadoras de cremalleras (2)
- Fresadoras de engranajes horizontales (6)
- Fresadoras de ruedas dentadas (5)
- Fresadoras dentales (2)
- Máquinas de corte de engranajes (10)
- Máquinas de ensayo de engranajes (8)
- Máquinas de tallado de engranajes (43)
- Mortajadoras de ruedas dentadas (24)
- Rectificadoras de engranajes (17)
- Rectificadoras de flancos de diente (2)
- más
- AB (1)
- ARTHUR KLINK (1)
- BACRI (1)
- BUZZI (1)
- CSEPEL (1)
- CUGIR-LORENZ (1)
- DEMM (1)
- DONAU-KNAPP (1)
- DRYPOINT (1)
- ELITE (5)
- ESCOFIER PFAUTER LIEBHERR (1)
- FROEMAG (1)
- GIMATEC (1)
- Gleason (2)
- GLEASON HURTH (4)
- GLEASON- PFAUTER (8)
- GLEASON-PFAUTER (9)
- GLEASON-PHOENIX (1)
- GSP (1)
- HABRAMA EGW KESEL (1)
- HAUSER (1)
- HOFLER (1)
- HURTH (2)
- HÖFLER (3)
- KAPP (2)
- KAPP NILES (1)
- KARATS (1)
- KARL KLINK (1)
- Klingelnberg (8)
- KNAPP-DONAU (1)
- KOEPFER (3)
- KOEPFER EMAG (1)
- Kolomna (2)
- KOMSOMOLEC (1)
- KOMSOMOLEC- STANKO (1)
- KONSOMOLEC (1)
- LIEBHERR (8)
- LORENZ (17)
- LORENZ / LIEBHERR (2)
- MAAG (6)
- MAHR (1)
- Mikron (9)
- MIKRON CIMA (1)
- MITSUBISHI (1)
- MODUL (1)
- MORAT (1)
- NILES (6)
- OERLIKON (1)
- OERLIKON, MAGERLE (1)
- OKAMOTO (1)
- PFAUTER (8)
- PFUATER GLEASON (1)
- RAUSCH (1)
- REISHAUER (3)
- SAMPUTENSILI (1)
- SARATOV (1)
- SCHUTTE (1)
- SICMAT (1)
- STAEHELY (1)
- STANEXIM (1)
- Stanko (6)
- Strausak (2)
- STRESSTECH (1)
- SYKES (1)
- Tos (6)
- Wahli (10)
- WMW (10)
- WMW Modul (2)
- WMW, MODUL (1)
- WMW-HECKERT (3)
- WMW-MODUL (1)
- WYSSBROD (1)
- _Unknown / Other (2)
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 112)
Año de construcción: 2004
usado
workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:52 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves
Año de construcción: 2002
usado
max. wheel diameter:90 mmgear width:300 mmmax. module:3 tip circle diameter:max. 65 mmroot circle dia. min.:28 mmmax. geared Length:150 mmtool length - max.:203 mmtangential ( y-axis ):140 mmaxial ( z-axis ):400 mmTailstock ( z²-axis ):350 mmloading and unloading portal ( z³-axis ):1850 mmmilling head -swivable +/-:+ A = 40 / - A = 40 °working piece table: max. outer diameter / bore hole:120 / 45 mmfeeds X-axis:1 - 10000 mm/minfeeds Z-axis:1 - 10000 mm/minrapid power traverse in X-and Z direction:10000 m/minrapid motion - y-axis:5000 mm/minfast rapid z²-axis ( tailstock ):10000 mm/min.speeds of tool:300 - 4000 U/minworking piece table speed:0 - 1000 1/min.connected load:44 kVAvoltage:400 Vcontrol voltage:24 kWweight of the machine ca.:7500 kgdimensions of the machine ca.:3170 x 2975 x 2440 mm
Año de construcción: 2015
usado
Año de construcción: 1998
usado
Año de construcción: 1999
usado
max. wheel diameter:280 mmmax. module:7 weight of the machine ca.:13 ttable turning speeds:100 U/mintable diameter:250 mmmin. number of teeth:4 hob turning speeds:1500 U/minmax. hob diameter:160 cutter length max.:230 mmMachine in good condition.Available 01.08.2024 ... más información
Año de construcción: 2004
usado
max. wheel diameter:200 mmgear width:60 mmmax. module:7 weight of the machine ca.:15 ttable diameter:180 mmtable turning speeds:100 U/minhob turning speeds:750 U/minMachine in good condition, without feed, without automationAvailable 24.08.2024 ... más información
Año de construcción: 1990
usado
max. wheel diameter:600 mmmax. module:10 min. module:2 total power requirement:1,4 kWweight of the machine ca.:0,68 tdimensions of the machine ca.:1,6x0,75 mdiameter of hob:15 mmgear width:140 mm ... más información
Año de construcción: 1999
usado
max. wheel diameter:5 - 260 mmgear width:400 mmmax. module:15 min. module:0,5 gear hobbing diameter - internal:30 mmmax. helix angle:> 85 ° Aussenverz.max. helix angle:> 45° Innenverz.Testing Range vertical:400 mmdist. between centers:5 - 600 mmtable diameter:260 mmmax. table load:100 kgspeeds:30 1/mintotal power requirement:1,6 kVAweight of the machine ca.:900 kgdimensions of the machine ca.:200 x 1300 x 2150 mmCNC Gear Tester in good condition, out of OEM Test Lab.For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)
Año de construcción: 2003
usado
max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.
Año de construcción: 2000
usado
max. wheel diameter:130 mmmax. module:3 total power requirement:15 kWweight of the machine ca.:6 tdimensions of the machine ca.:2,3 x 2,5 x 2,17 mA well-preserved CNC hobbing machine Vertical for shafts and wheelsWith tailstockAlso suitable for hard milling (good for steering pinion)Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mmAccessories :Hydraulical workpiece clampingAutomatic ...
Año de construcción: 2000
usado
max. wheel diameter:180 mmmax. module:5 min. module:1 weight of the machine ca.:14 tdimensions of the machine ca.:4,5 x 2,84 x 2,8 mmin. number of teeth:7 toolpiece turning speed range:4000-10000 U/mintool length:210 mmWith tail stockNo dressing deviceOnly CBN ... más información
Año de construcción: 2000
usado
max. wheel diameter:180 mmgear width: mmmax. module:4 total power requirement:14 kWweight of the machine ca.:8 tslide travel axial ( Z-axis ):300 mmwork piece - max.:490-640 mm ... más información
Año de construcción: 2007
usado
max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5 ... más información
Año de construcción: 2000
usado
pulling force - max.:2,5 tmax. ram stroke:1000 mmmax. workpiece diameter:40 mmBroaching speed:60 m/min.return speed:20 m/min.total power requirement:24 kWweight of the machine ca.:6 tdimensions of the machine ca.:1,7 x 2,4 x 4,77 mclamping plate:320 mm ... más información
Año de construcción: 2004
usado
max. wheel diameter:40-160 mmgear width:90 mmmax. module:3,5 min. module:1,25 weight of the machine ca.:5,6 tFor detailed technical data, see PDF File Page 15-16 ... más información
usado
HÖFLER H4000 CNC Gear Grinding Machine Year: 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition
Año de construcción: 1988
usado
usado
Año de construcción: 1982
usado
500 € Description: SAMPUTENSILI SU-SM 2TA Gear Tooth Deburring Machineweight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,000 mm ... más información
Año de construcción: 2002
usado
13.500 € Description: serial number: 6123 control: SIEMENS Sinumerik 840D , max. wheel diameter: 125 mm max. module: 3 toothing width max. (spur gears): 24 mm table diameter: 145 mm table bore: 80 mm table speed infinitely variable: 0.03 - 50 rpm centre distance: -25 to +180 mm max. swivelling angle: 12° max. inclination angle 45° stroke rate (double strokes): 1500 - 3000 DH/min. shock spindle speeds: 0.0076 - 43 rpm stroke position adjustment: 70 mm stroke length: 0 - 30 mm shaping spindle diameter: 85 mm cutting wheel holder: HSK 80 B drive power: 7.5 kW total power requirement: 30 KVA , number of teeth: tool: 1 - 200 Module min. 0.05 workpiece: 1 - 1500 Module min. 0.05 , please also have a look at the video and ,PDF documents of this machine max. wheel diameter: 125 mm, module min./max.: 3, gear width: 24 mm, control: SIEMENS Sinumerik 840D, table diameter: 145 ...