outras máquinas de alimentos usadas para venda

This APV Gaulin MC45 homogeniser is a 3-cylinder machine which is designed for 11.600 liter per hour with a maximum pressure of 320 bar. The homogensier is equipped with 2-stages with poppet valve cylinder. Manometer on the stages. Piston diameter: 54 mm. Motor: 100 kW - 380 V - 180 Amp - 50 Hz - 1475 rpm. Oil pumping system inside the machine. Stainless steel cladded., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly in the milk. The fat droplets are crushed by forcing the milk through fine nozzles under high pressure. This process prevents a layer of cream from forming on the milk., Excluding:, - Feetplates, Type of machine: Homogeniser, Capacity: 11.600 liter per hour, Stages: 2 stages, Max. Pressure: 320 bar, Valve cylinder: Poppet valves, Piston diameter: 54 mm, Motor: 100 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

This Karl Schnell creaming tanks is a part of a production line for sterilised processed cheese spreads. They serve for controlled viscosity increase following the sterilisation process, in order to achieve optimum spreading characteristics. Double jacketed. Max volume: 750 liter, effective volume: ± 600 liter. Scraper agitator that goes along the wall, motor: 2,2 kW - n1 1450 - i 75,02 - n2:19 rpm. 2x opening lids on the top. CIP spraybowls. Manual outfeed valve in the center of the bottom. 3 feet, 2x fixed and 1 with load cell. Instruction manual and technical drawings available., Excluding:, - Control panel., Type of Machine: Creaming tank, Volume: 750 liter, Inside Diameter: 98 cm, Inside Height: 100 cm, Agitator type: Scraping agitator that goes along the wall, Motor of agitator: 2,2 kW - 230/400 V - 50 Hz - n2: 19 rpm

This APV Gaulin MC 45 homogeniser is a 3-cylinder machine which is designed for 20.000 liter per hour with a maximum pressure of 172 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on the inlet and manometer on the stages. Piston diameter: 76 mm. Motor: 90 kW - 380 V - 172 Amp - 50 Hz - 1485 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly  ...

Qty. 1 Second-hand mixer homogeniser Can be used in the cosmetic and food industries. Production of creams, ointments, gels, mayonnaise, ketchup etc. Mfc.: Kates Polska Built: 2015 Type: 3MO.5 Volume capacity: 500 L Mixing speed: 1150 RPM Max. temp.: 130 °C Material: Stainless Steel  ... mais informação

Decanter Centrifuge Bowl Diameter 450 mm With control panel Skid mounted Bowl speed:3400 rpm Material: Stainless Steel Conditions New  ... mais informação

Grünbeck Reverse Osmosis System. New, unused. Complete installation. All documentation, component list, digital drawings and digital schemes present. Portable water pump with central switch cabinet PW Water storage tank 8m3 ...  ... mais informação

Make : FBF Model : 60/45 Capacity : 5000 L/h Bar pressure : 250 Year of Manufacture: 2016 Condition : Excellent Condition Used on : Milk / Yoghurt production Motor : 46 kw  ... mais informação

FBF Homogeniser 12,000 L/h 180 bar Make : FBF Model :075 Capacity : 12,000 L/H Bar Pressure : 180 bar Motor :76.5 kw Y.o.m : 2008 Weight : 2850 kg Condition : very good condition  ... mais informação

Pasteuriser for Milk 12,000 L/h Make : Fisher Model: E43 CFG Y.o.m : 2009 Capacity : 12,000 Litres Outlets : Separator & Homogeniser Thermal Circle : 4-45-65-75-4 Skid Mounted Condition : Very well maintained  ... mais informação

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen  ... mais informação

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby  ... mais informação

Gaulin, Homogenizer model MC18 3TPSX. stainless steel clad, 2 stage hydraulic valve assembly, 54mm pistons, Tungsten Carbide coated. aseptic cilinderblock, puppet valves.. Remote controlled homogenisation pressure ajustment and and read-out. Capacity 6000 l/h, 210 bar Maintenance history available. Spare parts available. Excellent working condition,

DEPA Membrane / Diaphragm, 100ltr / minute, Fully refurbished  ... mais informação

MAX MAX-6B Industrial Microwave 2018, Stainless, power 6Kw, Microwave frequency 2450mhz, temp range 0-300'C, variable speed, timer controls, with manual, mobile, 3Ph  ... mais informação

NITROGEN GENERATOR - PURITY UP TO 99.8% - GOOD WORKING ORDER - FREE IMMEDIATELY  ... mais informação

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE  ... mais informação

Karl Schnell process machine with lifting device and loading trolley. Automatic process: FV175-200 Type 046 Hoist: 200 Type 601 Nominal volume 200 l, total volume 250 l Dimensions: L x W x H (mm): 2900 x 1850 x 2400, Weight: 1705 kg Platform dimensions: L x W x H (mm) : 1600 x 650 x 1800, unscrewable Performance and capacity: pre-crushing, ultra-fine crushing, agitator, vacuum pump. Max. steam temperature: 120 °C. Max. operating temperature: 110 °C. Max. vapour pressure: 2 bar. CIP cleaning: 2 bar, 85 °C. Year of construction: 2020 Newly purchased for product development, only approx. 900 operating hours. Very neat condition, like new. CE Mark: Yes Condition: Like new, meticulously maintained and ready to use. Availability: On request

This Gimret UHT system is a continuous installation for sterilizing by heating, to ensure that a prepared liquid mixture is free from bacterial endospores, the mixture is passed through a sterilizer prior to the drying process. To obtain a continuous flow in the sterilizer, the material is first accommodated in a buffer tank from which the sterilizer is fed by using a dosing pump (low pressure). To kill the bacterial endospores a temperature of at least 135°C is required for a period of 5-7 seconds. To reach this temperature, steam is injected into the mixture that is dosed from the dosing pump. A meandering pipe works then realizes the required residence time at a set temperature of minimum 135°C.

Manufacturer: Alfa Laval Type: P3000 Year of construction: 1980 Max. sludge density: 1.25 kg/dm Max. drum speed: 4000 rpm  ... mais informação