trabajo con chapas de metal usadas para la venta

WaterJet STM MasterCut was manufactured in 2010 by the well-known Austrian company Stein-Moser GmbH. The machine performs precision machining of workpieces up to 180 mm thick using a pressurised water jet. The workpiece cutting process takes place on a large work area made of high-quality welded steel, with a length of 3000 mm and a width of 2000 mm, guaranteeing high stability and reducing the vibrations generated during machining. A modern CNC control installed in the control panel allows programming of the operating modes and full control of the machine. The STM WS3020 water cutting machine is equipped with a 37 kW BHDT HYTRON high-pressure pump, supplying the machine with high-pressure water. Technical parameters of STM MasterCut water cutting machine - working space (L x W): 3000 x 2000 mm - maximum workpiece thickness: 180 mm - positioning speed: 15 m/min - accuracy of po ...

Machine is in stable welded construction with 9 stands 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail Brush table Upper beam with water seam groove Oil filling Fastening and levelling material Emergency stop rail over the entire length of the machine Integrated emergency stop operation in the foot pedal for upper and bending beam 2. Foot pedal for 2-man operation Upper cheek protection 2 short-part clamping fingers Back gauge: 150-1150 mm Colour: light blue Power requirement: 400 mm Insertion depth: 1150 mm Positioning speed: 250 mm/sec. without roller scissors Bending angle: 145° Machine Number: K10192 Power: 8000x3.0 mm, 4.0 mm aluminum, 2.0 mm front Dimensions: 11.x3.4(2.1m for transport)x2.0m Weight: 26,000 k ...

Long bending machine with roller shears Emergency/Off/Rail Hand lever control with degree shutdown with 4 hydr. Upper Cheek Cylinders the machine is in good condition without backgauge Colour: green Total power requirement: 1.5 kW with roller scissors Bending Angle: 135 degrees Power: 6020x1.2 mm, 1.5 mm aluminium Dimensions: 6600 x 1700 mm Weight: 1800 kg Machine number: 6179 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with large insertion depth 1250 mm with foot pedal CNC touch control on the separate control panel Removable attachment rail hydr. Roller shears with safety bar 2 footswitches Slide-back sheet metal supports 4 stop fingers Back gauge: 1250 mm Projection: 1250 mm Colour: anthracite/grey Total power requirement: 32 A Insertion depth: 1250 mm Upper beam stroke: 200 mm Power: 6400x1.5 mm, 2.0 mm aluminum, 0.8 mm steel Dimensions: 7400 x 1950 x 1650 mm Weight: 5100 kg Machine Number:K15073 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Double bending machine, with the following equipment: Conical depth stop for 6 meter models Gripper set for 6 meter DB models (gripping stations 4 pieces) Additional gripper for short-length stop Variobend 3D Software Cutting apparatus up to 2.00 mm Servo drive unit 22 KW Safety package incl. light barriers Back gauge: 1250 mm Colour: blue Total power requirement: 22 kW Upper bolster stroke: 770 mm Number of stands: 6 pieces with cutter for cutting to length Power: 6400x1.5 mm, 2.0 mm steel, 0.8 mm aluminum Dimensions: 7170 x 2410 x 1800 mm Weight: 10.005 kg Machine number: 4521150 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with CNC 800 touch control (conversion 2018) with motorized stop system with motorized depth stop with motorized roller shears SM3 (3 mm steel, with cutting gap adjustment) with hydraulic material thickness adjustment with manual crowning backgauge/backgage 1000 mm Colour: blue Total power requirement: 35 A Upper beam stroke: 200 mm with roller scissors Number of stands: 7 pieces Bending angle: 140 degrees Power: 6400x3.0 mm, 4.0 mm aluminum, 2.0 mm steel Dimensions: 7500 x 2100 x 1600 mm Weight: 9800 kg Machine number: 05058-00/K18043 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with man. Slitting new feed roller rubbers Colour: green Total power requirement: 230 V Coil weight: 300 kg No straightening rollers Number of blades: 4 pairs Dimensions:c a. 1500 x 1500 x 1200 mm Weight: 300 kg Machine number: 4706 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Splitting line with 7 leveling rollers Guillotine shear for cross-cutting 2 pairs of splitting knives for a maximum sheet width of 1050 mm Color: Green Total power requirement: 2.9 kW Cutting speed: 10 - 25 m/min Straightening rollers: 7 pieces Number of knives: 2 pieces Straightening rollers top: 3 pieces Straightening rollers at the bottom: 4 pieces Speed: 10 - 25 m/min Coil weight: 2 t Dimensions: 1600 x 1450 x 1150 mm Weight: 965 kg Machine Number: 10065-0294 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t

with laser positioning aid at the punching station Hydraulic cylinders with fast return stroke Easy installation of special tools Projection also available in 310 mm including punch/punch search device Punching capacity: D 22 x 18, D 50 x 8 mm Max. stroke length: 100 mm Table size: 700 x 700 mm Projection: 510 mm Dimensions: 1520 x 820 x 1960 mm Weight: 1850 kg

Table dimensions 4000 x 2220 mm Working area (x,y) 1250x1300 mm Punching force 300 kN Workpiece weight max. 200 kg Tool holder "Trumpf" (fast exchange system) rotating with "Euromac" control external digital control panel Tool holder trolley and light barrier Table dimensions longitudinal 4000 mm Table dimensions transverse 2220 mm Punching pressure 300 kN Total power requirement 7.5 kW Weight: 5 t Machine number: MDC 336 Machine is sold unchecked in its existing condition.

Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69

with manual backgauge 750 mm and sheet metal holding system Cutting material diverter for sorting the parts to the front or rear Plastic-coated hold-down device with single stroke and continuous stroke Very flat cutting angle of only 0.8 degrees for low-torsion cuts Total power requirement: 3.0 kW Dimensions: 3750 x 1650 mm Weight: 1950 kg Machine number: 21/3 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Guillotine shears with NC control Motorized backgauge Pneumatically operated with sheet metal holding device Single and continuous stroke with pneumatic hold-down device suitable for cutting aluminum Pull-out sheet metal support at the front Cut-gap illumination Pneumatic connection required Colour: grey/blue Total power requirement: 400 V without cutting gap adjustment Connected voltage: 16 A Pneumatic hold-down device without cutting angle adjustment Fixed cutting angle Adjustable back gauge Power: 3020x2.0 mm, 2.5 mm aluminium Dimensions: 3800 x 1500 x 1800 mm Weight: 1600 kg Machine Number:123106 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Motorized guillotine shears with front-adjustable hand backgauge with digital display Sheet metal slide to the front with pneumatic sheet metal holding device Compressed air connection required Colour: grey/blue Total power requirement: 16 A without cutting gap adjustment Connected voltage: 16 A Automatic hold-down Fixed cutting angle with backgauge Dimensions: 3020 x 1900 x 1200 mm Weight: 2500 kg

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine number: 200034

Motorized guillotine shears with front-adjustable handle stop Sheet metal laying to the front Colour: grey/blue Total power requirement: 32 A Cutting gap adjustment manual Automatic hold-down Angle stop 1000 mm Cutting angle > 1.11 degrees Adjustable back gauge: 0 - 750 mm Dimensions: 4585 x 2592 x 14300 mm LZ at short notice by appointment

with hold-down and cutting angle adjustment Colour: grey Adjustable back gauge approx. 500 mm Weight: 350 kg Dimensions: 2000 x 800 x 1300 mm Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.  ... más información

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,  ... más información

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i