mandrinadoras y centros de mecanizado usadas para la venta

Description: • Lot of 2 hydraulic vice • It includes: • 1 x vice: maximum opening approx. 155 mm, clamping surface 160 x 50 mm, handle is missing • 1 x vice: maximum opening approx. 160 mm, clamping surface 160 x 40 mm • Dimensions for transport 900 x 850 x 350 mmApprox. Onsite Dimension. (l x w x h): 900 x 850 x 350 mm, weight approx.: 100 kg

x-travel:600 mmy-travel:400 mmz-travel:600 mmtable surface area:750 x 450 mmcontrol:TNC 410 HEIDENHAIN turning speeds:50 - 8000 U/mintool change unit:24 tool taper:SK 40 table load:400 kgrapid traverse:20 m/minspindle drive:9 / 12 kWtotal power requirement:18 kVA kVAweight of the machine ca.:3,2 tdimensions of the machine ca.:2500 x 1600 x 2800 mmincl. IR meashuring system Heidenhain TS 640inkl. elektr. Handwheel Heidenhain HR 410inkl. 10 pcs. SK 40 tools

Description: • Electric reach truck • Serial number 1855 0 54878 • Lifting capacity 1400 kg • Minimum height passage 3250 mm • Fork lenght 1170 mm • Forward feed of the forks approx. 600 mm • Maximum fork width 850 mm • Triplex mast • Solid tyres • Battery 48 V, with battery charger FULMEN TONIC G48T100 • The battery is dead, it must be replaced • Please note that the delivery term 'loaded on truck' is only valid for the machines as shown at the pictures and a suitable truck is required for transport. Any additional services to reduce the dimensions for transport will cause further costs that have to be agreed and paid before the pick upApprox. Onsite Dimension. (l x w x h): 3,170 x 1,250 x 3,250 mm, weight approx.: 3,700 kg

x-travel:960 mmy-travel:600 mmz-travel:480 mmrotary table::D 350 mmtable load:200 kgspindle turning speed range:12.000 1/mindrive capacity - spindle motor:14/10 kWcontrol:HEIDENHAIN iTNC 530 rapid traverse:32 / 32 / 24 m/minTool changer:30- fach spindle taper ISO:BT 40 weight of the machine ca.:7,4 ttotal power requirement:45 kVAdimensions of the machine ca.:3,1 x 2,3 x 3,1 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 350mm,A-axis (120/-42°), C-axis 360°,Internal coolant supply, el. handwheel,chipconveyor,direct measuring system,Hour meter: approx. 9.000 h "machine on", approx. 3.500 h "spindle on"

Description: • CNC vertical machining centre • Serial number 1113 000087 3 • Total installed power 30 kVA • 3 axes • Travel (X,Y,Z): 800 x 630 x 630 mm • Continuously programmable feed speed from 20 mm/min to 15000 mm/min • Rapid movement 30 m/min • 2 x tool magazine with 16 positions each, some elastic nippers are broken • Cone SK 40 • Spindle speed range: 20 - 18000 rpm • The tools that appears in the photos are included • Table dimensions 1250 x 700 mm, distance between T-slots 63 mm • Maximum weight on the table 600 kg • HEIDENHAIN TNC 430 numerical control • Refrigeration system • Machine connection hours according to counter 67708 • Spindle working hours according to counter 10881weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,450 x 4,000 x 2,450 mm

spindle diameter:180 mmx-travel:6.000 mmy-travel:2.900 mmtotal power requirement:95 kWweight of the machine ca.:130 mit Zubehör tz-travel:1.250 Ram mmw-axis:1000 Spindel mmram stroke:1250 mmdimension of the ram:450 x 450 mmbore spindle stroke:1000 mmbore spindle turning speed range:1600 U/minpowered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mmRotary-table: CNC-IOS 40 NC mmstepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mmtravel - cross:Längs 1230 mmtable load of rotary table max.:40 Tonnenclamping plate:3 x 8000 x 2000 mmCNC Ram-Type Floor Boring and Milling machine,dismantled and stored

x-travel:600 mmy-travel:700 mmz-travel:600 mmcontrol:TNC 426 HEIDENHAINtoolpiece magazine: chain magazine:30 Pos.milling spindle - taper:SK 40 turning speeds:12000 1/minrapid traverse:24 m/minweight of the machine ca.:9,5 t5-axis universal machining center,NC-rotary-table,B-axis (milling head)Swarf conveyor,

x-travel:500 mmy-travel:300 mmz-travel:350 mmweight of the machine ca.:5,7 tdimensions of the machine ca.:286 cm x 276 cm x 290 cm mm x 2600mm (ohne Filteranlage u. Späneförderer) mtool magazin::36 tool taper:SK40 turning speed range:0-9000 U/minmain drive motor:18 kW2 Pallet Changer 500 mm x 300 mmincl. 4. axis , fixed on first palletincl. filter mist model AFS 600incl. BLUM tool setterincl. 20 pcs. SK 40 tools ( starter kit ) incl. internal cooling system ( IKZ ) 20 bar and paperfilterincl. chipconveyerincl. Machine documentation: circuit diagrams, electrical plans, operating instructions, etc.Miscellaneous: Machining is possible on the device bridge or the rotary swivel device.Very nice condition , from first hand ( optical industry ) approx 33.500 hours ( spindel ON )

x-travel:1300 mmy-travel:610 mmz-travel:810 mmtable surface area:1.450 x 610 mmrapid traverse X- and Y-axis:30 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:15.000 1/minmax. torque on the spindle:120 / 48 Nmspindle:18 / 15 kWtool change unit:60 Pos.CNC-control:HEIDENHAIN iTNC 530 weight of the machine ca.:6,8 ttotal power requirement:40 kVAdimensions of the machine ca.:3,45 x 2,6 x 2,75 m5-axis simultaneously-machining center,NC-rotary table D 500mm,controlled milling head (B-axis) +-120°,internal coolant supply 20bar, paper filter,3D-touchprobe RENISHAW,direct measuring system,chipconveyor,approx. 41.500 h "machine on", approx. 15.500 h "spindle on (total)" , last spindle around 4.000 h

x-travel:1270 mmy-travel:660 mmz-travel:610 mmtable surface area:1500 x 660 mmtable load:1,3 tcontrol:ULTIMAX 4 turning speeds:10000 1/minspindle:15 kWTool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/mintool change unit:24 Pos.total power requirement:30 kVAweight of the machine ca.:9,5 tdimensions of the machine ca.:4,8 x 4,56 x 2,95 mvertical machining center, el. handwheel,chipconveyor,

x-travel:630 mmy-travel:500 mmz-travel:500 mmtable-size:800 x 500 mmspindle taper ISO:40 turning speed range:0 - 10.000 U/minfeeds longditudinal/cross/vertical:1 - 30000 mm/minrapid motion -longitudinal/cross/vertical:30 m/minno. of tools in magazin:24 workpiece diameter at full load:80 mmwotkpiece diameter with 2 vacant positions:140 mmworkpiece length:300 mmweight of tools max.:7 kgtable load:500 kgspindle drive:9 / 11 kWcontrol:SINUMERIK 810D total power requirement:30 kVAweight of the machine ca.:4,2 tvertical machining center,el. handwheel,ShopMill,direct measuring system,3D-touchprobe RENISHAW MP 10 ,laser,internal coolant supply,mode 4,airblast,chipconveyor,approx. 42.500 hours on hour meter

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

x-travel:1.500 mmy-travel:700 mmz-travel:610 mmcontrol:HEIDENHAIN iTNC 530 table-size:1.400 x 700 mmtool taper:SK 40 numbers of positions in the tool changer:48 fachspindle turning speed - stepless:15000 1/minrapid traverse:36 m/mintable load capacity:700 kgspindle drive:25 kWtotal power requirement:30 kVAweight of the machine ca.:9,1 tdimensions of the machine ca.:3,7 x 2,65 x 2,9 mvertical machining center,20 bar internal coolant supply with paper filter,3D-touchprobe,chipconveyor,el. handwheelmeter readings:approx. 43.600 h "machine on", approx. 20.000 h "spindle on",

x-travel:510 mmy-travel:510 mmz-travel:510 mm:550 x H 800 mmB-axis (table):0.001 Gradtable-size:400 mmtable load:400 kgspindle drive:22 kWspindle nose:40 BBTspindle speeds:15000 1/minnumber of tools:60 tool diameter:150 mmtool length - max.:410 mmweight of tools max.:8 kgmilling feeds:1-20.000 mm/minrapid speed:60 m/minMachine size (LxWxH):1750x5060x2720 mmweight of the machine ca.:9 tinner coolant:70 bar3 chip conveyor:2 fachautomatic tool changer:60 fachAutomatic Pallet :2 Stück:von LHL Brand new horizontal machining center with: CONTAINS:1. Control system Fanuc Oi-MF (10.4" Screen)2. Working table size: 400 x 400 mm3. Max. workpiece dimension: DIA. 550 x H 800 mm4. Max. table load capacity: 400 kgs each pallet5. Spindle center to table surface: 80 ~ 590 mm6. Table center to spindle nose: 70 ~ 580 mm7. X/Y/Z Stroke 510/510/510 mm8. X/Y/Z Stroke rapid traverse: 60/60/60 m/min9. Spindle ...

x-travel:700 mmy-travel:700 mmz-travel:700 mmturning speeds:18.000 1/minmax. torque on the spindle:110 / 84 Nmtool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fachsize of pallet:500 x 500 mm mmmax. workpiece weight:600 kgspindle:34 / 28 kWrapid traverse:60 m/mintotal power requirement:68 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:9,5 x 7,5 x 3,4 mdimensions for transport:4,3 x 2,4 x 2,6 mhorizontal machining center with linear drives,,NC-roundtable,pallet pool RS 10 for totally 12 pallets,monitor for workpiece setting-up device,high pressure coolant through spindle 40bar,internal air blast supply,mode 4,hydraulic clamping 2/4 for workpiece setting-up device and working table,BLUM laser,oilmist suction,3D touch probe TS 649,tool-breackage control, mechanical,SDS spindle diagnosis system,flush gun,el. handwheel,chipconveyor,approx. 112.000 h "machine  ...

x-travel:630 mmy-travel:630 mmz-travel:500 mmnumber of spindle speeds:0 - 15000 spindle motor:32 kWsize of pallet:500 x 500 mmb-axis:36000 x 0,001 °no. of workpieces in the magazine:61 Stücktool taper:HSK 63 weight of the machine ca.:15 tDouble-SpindleMechanical processing cylinder head VR6 ... más información

x-travel:850 mmy-travel:700 mmz-travel:500 mmturning speeds:10.000 1/mintool taper:SK 40 control:iTNC 530 HEIDENHAIN tool change unit:38 round table:2 x D 280 mmspindle:32 / 17 kWspindle:159 / 107 Nmrapid traverse:45 m/mintotal power requirement:43 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:2,4 x 3,2 x 2,9 m5-axis machining center,NC-round-swivelling configuration dual round tables dia. 280 mm 3 D touchprobe RENISHAW,chip conveyor,tool-changing time (chip to chip) approx. 4,5 s,internal coolant supply thru spindle (40 bar / 600 liter),el. thermal compensation,airblast through spindle,el. handwheel,approx. 62.500 hours "machine on", approx. 19.900 hours "spindle on"

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours

x-travel:800 mmy-travel:600 mmz-travel:500 mmpallet size::320 x 320 mmtable load:150 kgspindle turning speed range:24.000 1/mindrive capacity - spindle motor:22 kWcontrol:HEIDENHAIN iTNC 530 feed speeds infinitely variable:20 / 20 / 40 m/minTorque:46 Nmrapid traverse:50 m/minTool changer:220 Pos.spindle taper ISO:HSK A-63 weight of the machine ca.:8,5 tdimensions of the machine ca.:6,5 x 5,5 x 3 mdimensions for transport:2 m5-axis simultaneously universal-machining center,with NC-rotary-swivelling-table A-axis +30/-110°, C-axis 360°,internal coolant supply 18-70bar, paper-filter,infrared touchprobe M&H PS 32.00,oilmist suction,MQL (minimal quantity lubrication),APS,ITC,el. handwheel,chipconveyor,EROWA pallet-pool for 24 pallets,approx. 131.000h "machine on", approx. 20.700h "spindle on"

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:30.000 1/mintool taper:HSK 50 control:HEIDENHAIN iTNC 530 spindle:20 /15 kWtool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,mode 4,oilmist suction,internal coolant supply,approx. 152.000 hours "machine on", approx. 60.400 hours "spindle on" in total