subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 207)
ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.
I am selling a fully equipped edge banding machine BRANDT Ambition 1220, built in 2010: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge Banding EVA Glue Manually adjustable material pressure zone Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 1 motor manually adjustable Radius scraper R2 pneumatically shut-off Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Overall length including feed plate 4150mm Total weight 1320kg Very good condition, fully functional!
I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!
I sell a new edge banding machine Cormak EBM300, year of construction 2022: LCD touchscreen display for setting the machine parameters and aggregates ON/OFF connection. Top feed belt 6 m/min. Element height 10 - 50 mm Edge thickness 0.4 - 3 mm edge banding, Sawing the final cut Radius R2 Milling Polishing brushes Total weight 400kg Length 2,30m (including edge plate 2,60m)! Feed zone only 1.30m long, convenient for the smallest workshop, or as an additional machine for edge banding the small work stucco quantities. New machine including warranty ratios, possible to try ! Full documentation and CE included. Available the same.
Code: 0317 Brand: OSAMA Model: S4R/1300 - CE Standard Automatic 4-roller gluing machine for wood panels, laminates, technical panels, foam, soundproofing, plasterboard, parquet, doors, suitable for uniform gluing of many types of fluid adhesives such as urea-formaldehyde, resorcinol, melamine, phenolic resin, polyvinyl, epoxy adhesives etc. - CE Standard Technical data: Automatic washer for perfect roller cleaning Uniform and constant spreadin throughout the working length Working width mm 1300 Working height mm 100 Spreading rollers diameter mm 210 Feed speed 20 mt/min Motor power Hp 1 Overall dimensions mm mm 2100 x 1100 x 1600 h Weight kg 700
- year of manufacture 2001 -DTR - after HOMAG service - pre-cutter, earning corners - wooden glue up to 9 mm TECHNICAL PARAMETERS: machine tool adapted for machining PVC/ABS flanges veneer up to 3 mm thick and wood stickers up to 9 mm thick pre-cutter - milling the board belt pressure tank with glue, for hot melt glue granules additionally roll for applying glue heated strip tape strip guillotine - pre-cutting veneer 3 pressure rollers 2 ready-made ball cutting units 2 edge milling units (radial cutters) corner earning unit (milling) scraper aggregates - for removing excess glue polishing units .max. element thickness 50 mm Min. element width 60 mm Min. element length 160 mm feed speed 96 m/min total power 10,8 kW extraction connection diameter 120 mm dimensions (L/W/H) 5700 / 1200 / 2100 mm weight 2000 kg
OTT Tornado - TOP Control - via a 15-inch colour touch monitor for full automation and maximum ease of use CM-CombiMelt gluing system Suitable for the processing of EVA and PUR hot melt adhesives as well as all common cleaning granules Joining machining part for attaching chipboard Automatic Roller Magazine Automatic Edge Magazine Double cross-cuter, automatic swivel 0° / 3° Flush milling machine - for flush milling - 12mm Fine milling machine RADIUS - Radius milling - Profile knife R2 - R5 Automated Copy Milling - Corner Rounds Scraper Device - Radius Surface Scraper Device Lubricant Spray Device - PU Cleaning set with fine buffing device very stable workpiece support with roller conveyors - FRONT with scissor pull-out Complete tooling included First delivery 2012 Machine is WORKSHOP OVERHAULED in TOP CONDITION
Edge thickness 0.4-3 mm Max. plate thickness 45 mm Kappsaegen Buendingfraesen Feed rate 6 m/min ... más información
Wood Her UNO 1304 FU + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit (flush milling 6 mm with tool change), radius milling - chamfer milling - 15° Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Machine is WORKSHOP OVERHAULED in TOP CONDITION from craftsman's workshop from stock Lieboch
Joint milling Kappsaegen Buendingfraesen Ecik rounding Radus Ziehklinegen Straight scraper blades Schwabelln Feed rate 9 m/min ... más información
Cross-cut unit with vertical rounding Buendingfraesen Radius Scraper Blades Buffing unit Feed rate 9 m/min ... más información
Code: 0253 Brand: CEHISA Model: BRYKO - CE Standard Automatic edge bander for wood, Pvc, veneer, abs, melamine edges - CE Standard Technical data: Edge thickness min/max 0,4/2 mm Min/max panel height 8-40 mm Min panel length mm 120 Min panel width mm 75 Panel feed speed mt/min 5,5 Composition: Gluing unit: Glue tank with digital thermostat - Automatic feeder for roll and strip edges - 1 motorised roller + 1 idle roller 2-blade End cutting unit with high-frequency motor - Tool rotation speed 12000 rpm Upper and lower trimming unit - Tool rotation speed 12000 rpm Total installed power Kw 2,5 Compressed air 6-7 bar Overall dimensions mm 1800 x 950 x 1200 h Weight kg 430
Gluing System -EVA Hotmelt Premilling Unit -yes Corner Rounding -Unit yes Max feed speed-14 m/min Maximum panel thickness-60 mm Operating Units-8 Min. panel height-8 mm Max. panel height-60 mm Min. edge thickness-0,4 mm Max. edge thickness-8 mm Max. forward feed speed-14 m/min Top pressure-yes Pressure with-idle wheels Panel support guides-yes No. Panel Sizing / Milling units-1 Unit : pre-milling unit automatic timed intervention motor power : 2.2 KW Lamps to preheat the side of the panel-yes Edge coil magazine-yes no. positions -1 Gluing system-yes glue pot for EVA hot melt glue-yes glue pot for PUR glue-yes Roller set to press the edge-yes no. pressure roller-3 with positioning by NC-yes No. Edge Processing Units-6 No. Edge Processing Units 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW No. Edge Processing Units 3 Processing Unit : C ...
Banding thickness max 3 mm Plate thickness max 50 mm Thickness of roll material max 3 mm Workpiece width min 70 mm Feed max 10 m/min Preheating zone Glue system granules Glue basin at the bottom Quick-change glue basin Joining milling unit Cross-cut saw unit 2 engines Flush/Radius/Chamfer Stations 1 Corner Copy Unit 1 engine Scraper unit Profile Scraper, Flat Scraper Buffing unit Stripe magazine Units clocked pneumatic Execution Right-wing machine Machine length 4,150 mm Control BRANDT EASYCONTROL EC 10+ CE mark Total connection 9.5 kW Very good condition
-Feed rate 12 m/min. - Touch screen control panel at eye level -Central - Glue basin Teflon 3 kg - Pneumatic roller capping - Pneumatic cylinder for workpiece spacing - Joining milling unit with 2 pieces of HM joining knife heads motors 2x1.4 kW, 200 Hz, 9000 rpm (1 x synchronous, 1 x counter-rotation) - Heating lamp for preheating the plate - Pre-capping from the roll - Flush and radius milling unit top and bottom with vertical and horizontal keying. 2 motorsx 0.5 kW, 200 Hz, 12,000 rpm - Shape milling unit (corner cutting) at the top and bottom, for flush milling and corner rounding of PVC edges Motor 0.55 kW, 200 HZ, 12,000 rpm. - Radius scraper unit Scanning from above, below and to the side For rounding pre-milled PVC edges. - Buffing unit for gripping the edges at the top and bottom. 2 motors x 0.18 kW, 50 Hz, 1400 rpm - Spray nozzle syste ...
Glue cartridges Kappsaege Buendingfraesen Scraper Radius Scraper Glue ... más información
SPECIFICATIONS: Max. gluing height mm: 55 (polyurethane glue) Workpiece length min. mm: 250 Aggregates: Headjoints/Milling Cutters/Cutters Rounding unit/edge cutter Edge trimmer ... más información
SPECIFICATIONS: Min. processable edge thickness mm: 0.4 Max. processable edge thickness mm: 15 Max. edge thickness mm: 60 Voltage: 380 volts Equipment: 2 tilting units / edger / brushes / glue container ... más información
Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12