subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 207)
SPECIFICATIONS: Max. working length mm: 1300 2 rollers, diameter mm 200 top - bottom Complete with: - Glue container - Roller protection grille - Safety pedal ... más información
Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...
Workpiece return for single-sided edge banding machines in left-hand design, machine length approx. 8-10m ... más información
-Joint milling -Automation package for small batch production -Glue specification for workpiece thickness max. 60 mm -Pre-milling 2 motors / swivelling -Horizontal spray nozzles Lubricant -Multiple processing unit with 2 motors (max. 4 profiles) -Multiple profile scraper unit (max. 4 profiles) -Space reserve approx. 600 mm -Surface scraper -Copy buffing unit with 4 buffing motors -Cleaning agent spray nozzles top and bottom -Smoothing unit for smoothing and eliminating white spots Available from November / December 2024 yes after delivery date of the new machine-1 kguncheckedloaded on truck
-Joint milling -Automation package for small batch production -Glue specification for workpiece thickness max. 60 mm -Pre-milling 2 motors / swivelling -Horizontal spray nozzles Lubricant -Multiple processing unit with 2 motors (max. 4 profiles) -Multiple profile scraper unit (max. 4 profiles) -Space reserve approx. 600 mm -Surface scraper -Copy buffing unit with 4 buffing motors -Cleaning agent spray nozzles top and bottom -Smoothing unit for smoothing and eliminating white spots (Attention: The IMA edge will be available from approx. mid/end of January 2025, depending on the delivery date of the new machine).-1 kguncheckedloaded on truck
Working height 900mmNominal width 1400mmEffective working width 1370mmRolling pressure force max 5kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 350mmPanel thickness min 3mmGlue hot melt PURApplication rate 40-80g/mDriving power 6kWTempering device 24kW
Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005
Max. panel width 800 mm Min. panel length 300 mm Max. panel length 2400 mm Length of conveyor 10000 mm Panel return for edgebander Right Max. forward feed speed 30 m/min Panel ejection by means of: air jet bench-1 kguncheckedloaded on truck ... más información
Assembled and inspectable machine in operation at Ferwood warehouses Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 35 m/min Pressure with rubber belt Panel support guides with positioning by NC No. Panel Sizing / Milling units NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit automatic timed intervention Edge coil magazine no. positions 48 glue pot for EVA hot melt glue premelter for EVA hot melt glue laser laserTec Roller set to press the edge no. pressure roller 5 No. Edge Processing Units 6 Processing Unit : end trimming no. motors : 2 Processing Unit : fine trimming to trim and round no. motors : 2 Processing Unit : fine trimming to trim and round no. motors : 2 Processing Unit : edge scraping Processing Unit : glue scraping Processing Unit : buffing no. motors : 2 Spray unit Units fitted on overtables ...
Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006
Equipment: - Quickmelt - gluing part - Automatic edge magazine for roll goods and Fixed lengths, incl. roller plate diam. 800 mm - Heavy pressure zone with driven, pneumatic pressurized main pressure roller and 3 free-running holding pressure rollers. - Standard equipment with automatic Automatic lubrication for the transport chain. - Motor-adjustable upper pressure. - Control panel at the machine inlet. - Electronics control PC 20+ - Noise protection cladding - Modem for remote service and maintenance Other features: -Auto. Edge retraction - Adjustable inlet ruler - Extension inlet ruler 300 mm - Program adjustment inlet ruler - Program adjustment pressure zone - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Pneum. Adjustment Caps Chamfer/Straight - Pneum adjustment scraper blade - Pneum. Adjustment of milling unit - Pneum. 2-point ...
I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...
I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!
• Edgebander • Serial number 8685206 • Total installed power 26 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 8 mm up to 40 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed speed: 16-28 m/min • Feed motor 1.50 KW • NT20S programmable control, PT software • Joint trimming unit, 2 x motor 3.70 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 2 x motor 0.37 KW-12000 rpm • Fine trimming unit, 2 x motor 0.73 KW-12000 rpm • Profile trimming unit, 4 x motor 0.37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0.37 KW-1330 rpm8300x1300x2100 mm3000 kguncheckedloaded on truck
INVITATION FIX on 5 July 2024 in the morning ! AUTOMATIC ADJUSTMENT OF OPTIMAT INFEED GUIDE EXTENSION INFEED 500 MM OPTIMAT SLIDING CARRIAGE SEPARATING AGENT SPRAYER TOP/BOTTOM AUTOMATIC ADJUSTMENT OF OPTIMAT PRESSURE ZONE PRESSURE TANK FOR PU GLUE CONTAINER FRONT PART PNEUMATIC ADJUSTMENT OF CROSS-CUT MOTOR PNEUMATIC ADJUSTMENT OF PRE-MOULDING UNIT MOULD MILLING UNIT FK11 MANUAL BELT SANDING UNIT KS10 PNEUMATIC ADJUSTMENT KS10 BEVELLED/RADIUS SANDING UNIT PROFILE OPTIMAT PN10 FINISHING UNIT FINISHING UNIT FA11 TOP / BOTTOM10000x 2400 x 2200 mm5500 kguncheckedloaded on truck
Min. panel height 10 mm Max. panel height 60 mm Min. panel width 60 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 18 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Edge coil magazine glue pot for EVA hot melt glue yes Roller set to press the edge no. pressure roller 3 No. Edge Processing Units 8 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 NO. EDGE PROCESSING UNITS 5 Processing Unit : edge scraping NO. EDGE PROCESSING UNITS 6 Processing Unit : milling hogging no. motors : 1 NO. EDGE PROCESSING UNITS ...
Very well maintained and no repair backlog IMA Combima System edge banding machine, one-sided U-shaped. The transport chains were completely overhauled in 2021 including new chain plates. The glue application was replaced with Quickmelt and the KFA units were completely overhauled. Technical data: - Workpiece length max. 2400 mm - Workpiece thickness 13 - 40 mm - Edge material 0.3 - 3 mm - Feed max. approx. 30 m/min - Feed roller conveyor with rotating cone Data for first IMA edge: IMA Combima-Systems/II/R75/1280:2 30/3:1/R3 Year of manufacture 2007, machine no. 14246 - Infeed - Format processing right side Double cutting for longitudinal and transverse processing 1 motor approx. 4.4 kW 2 motors approx. 6.6 kW - Profile milling and grooving unit right side - Format processing left side Double cutting for longitudinal and transverse processing 1 moto ...
Working width: 1400mm, max. speed: 20m/min, power: 15kW, dimensions X/Y/Z: approx. 2000mm/750mm/1500mm, weight: approx. 1000kg. On-site inspection is possible. ... más información
Motor 5.5 kW/400 V/50 Hz/14 A, milling motors, cross-cut saw 200 Hz, feed rate 9 m/min., extraction connection 120 mm, glue unit, pressing unit, impact shears, cross-cut saw unit, flush and radius milling unit, scraper unit, polishing unit, pull-out frame with castors ... más información