trabajo con chapas de metal usadas para la venta

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

Schechtl brand manual bending machine, in perfect condition, used only to produce copper, steel and stainless steel sheet metal converse, used very little over the years. With accessories for the production of bends visible in the photo ... más información

Offer 23316 Specifications: - Max. working width 1540 mm - max material thickness at 40 kg / mm², strength 2.5 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 100 mm - the lower beam 100 mm - Upper beam drive 400 V / 0.75 kW - Bending beam drive 400 V / 1.5 kW - Accessories - separate control cabinet with control panel - Back gauge with stop depth up to 500 mm - Space requirement with back gauge W 2350 x H 1450 x D 1250 mm - Space requirement control cabinet W 600 x H 850 x D 500 mm - Weight approx. 1800 kg

Hydraulic swivel bending machine Year of construction 1978 Power 2.000mm x 2,5mm Engine 2,2KW Weight approx. 2,8to Technically good condition Condition according to photos. Machine ready for demonstration under power.  ... más información

Working width: 4100 mm sheet thickness: 6 mm radius: 100 mm rear gauge: 0-1000 mm power: 18.5 kW space: 4600 x 2200 x 1950 mm weight: 11000 kg  ... más información

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

The machine is in good technical condition. Nominal forming force: 50t Max. sheet length: 3000mm Upon agreement, the possibility of inspection in progress. ... más información

Specifications: - Printing capacity 25 t - Flat steel shears - Flat bars up to 100 x 11 mm - or: 60 x 10 mm - Sectional steel shears - L- and T-blade at 90° 80 x 8 mm - at 45° 50 x 6 mm - Bar steel shears for round steel + square steel - Clinker with square notcher for sheet metal up to 8 mm - Stroke rate 30 1/min - Drive 380 V / 1.5 kW - Space requirement approx. W 800 x D 1000 x H 1600 mm - Weight approx. 650 kg

FEEDSTOCK TUBE  external diameter min.: 38 mm  external diameter max.: 130 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 550 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 100 m/min  pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end length: 230 mmmin ...

sheet width: 0120 mmcoil outside dia.: 1200 mmweight max. in kg: 300 kgsheet thickness - max.: 1,00 mmdiam. of the rolls ca.: 10 mmnomb. of straightening rolls: 16 diameter of the mandrel: 350 - 530 mmtotal power requirement: 5,50 kWweight of the machine ca.: tdimensions of the machine ca.: m- Reel and straightener as a combination with a common frame- Manually adjustable reel brake- Coil limiting ring at the front, fixed washer at the rear- Reel can be moved manually laterally- manual reel spreading- side belt – guide rollers with central adjustment at the inlet- manual block adjustment of the straightening mechanism, display via dial gauges- Oil - central lubrication- Loop control via sensor- Speed adjustable via potentiometer- Manually adjustable hold-down roller at the inlet- Large roller basket with cover on the outlet- Free-standing control panel- Lateral adjustment of the ree ...

sheet width: 0120 mmcoil outside dia.: 800 mmweight max. in kg: 150 kgplate thickness: 1,50 mmdiam. of the rolls ca.: 12 mmnomb. of straightening rolls: 16 diameter of the mandrel: 180 - 550 mmtotal power requirement: 5 kWweight of the machine ca.: tdimensions of the machine ca.: m- Reel and straightener as a combination with a common frame- Manually adjustable reel brake- Coil limiting ring at the front, fixed washer at the rear- Reel can be moved manually laterally- manual reel spreading- side belt – guide rollers with central adjustment at the inlet- manual block adjustment of the straightening mechanism, display via dial gauges- Oil - central lubrication- Loop control via sensor- Speed adjustable via potentiometer- Belt support at the outlet- Free-standing control panel- Lateral adjustment of the reel using a hand crank- Belt support at the outletThe data for this ad was created ...

Pipe diameter: 219mm, nominal width: 3600mm, including preheating oven, Blasting System GIETART GW 1530-425, centrifuge, coating center, drying tunnel, chain conveyor and color filter, operational hours: ca. 8,000h. ... más información

material width:150 mmcoil weight:1,5 tcoil internal diameter:500 mmcoil external diameter:940 mmstrip material:20 x 1,0 - 50 x 4,0 / 200 x 2,0 mmwire diameter:1,0 - 5,0 mmpower requirement:0,7 kWweight:0,7 tDimensions (WxDxH):1,0 x 1,7 x 2,0 mpalett decoiler:motoric driven  ... más información

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

Mechanical sheet metal scissors 3 m  ... más información

Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

Mettal cutting shears BEM Berlin-Erfurter Maschinenfabrik STA3/3/2050 2 Working condition. ... más información

control panel: Boschert Stanze Year: 1990 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

sheet width: 2.100 mmplate thickness: 3 mmdistance between columns: 2.100 mmweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información