trabajo con chapas de metal usadas para la venta

Max. punching force: 240kN, working area: 1250-2500x550-1100mm, weight: 3.5t, available die diameter round: 3.1/ 4.1/ 4.2/ 5.2/ 6.5/ 8.2/ 10/ 11/ 12/ 13/ 16/ 17mm, longitudinal: 9x16/ 9x20mm, with documentation, an inspection is possible. ... más información

CONTROLS  PLC SIEMENS S7 300 Main spindle DIN 55022 size 11Crosshead spindle DIN 55022 size 8Drive power main spindle 30.7 KWDrive power hydraulics 33.5 KWMain spindle speed 350 - 1000/minWorkpiece diameter max. 650 mmCrosshead stroke 300 mmEjector stroke 80 mmCrosshead contact force 400 kN

Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible. ... más información

CHARACTERISTICS STRETCH-STRAIGHTENING  force: 500 kN  Working length: 13000 mm  center height: 250 mm  stroke: 1000 mmmax. stretching length: 13'000 mmmax. stretching length:  3'000 mmjaw width: 160 mmjaw opening: 0-100 mmTorque: 600 NmRotation angle: +/- 90 degreesRotation speed standard: 1 rpmRotation speed fine: 0.25 rpmStretching speed: 10.8 mm/secRapid speed in working direction: 106 mm/secRapid speed in return for releasing: 93 mm/secToothed rack pitch: 250 mmJaw confirmation: 5-6 kgf/cm2 (pneumatic)Mandrel confirmation: 5-6 kgf/cm2 (pneumatic)

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. ... más información

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 90 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- Ultrasonic system incl. digitization- test process Krautkrämer and measuring devices- Ultrasonic measuring device- Length differences >500 mm Sorting out Krautkrämer- Förster Defectomat continuous spool- Replacement mix-up test Krautkrämer

Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.

CONTROLS  PLC SIEMENS S5 System consists of:+ MAE M-AH 4RH automatic straightening machine, year 1999+ Bühlmann Tube End Processing Station+ W. Müller blow-out device, year 2003max. straightening force: 40 kNmax. width between centers: 750 mmcenter height: 160 mm ... más información

Working width: 2040mm, max. sheet thickness: 4mm, weight: 1.8t, an inspection is possible. ... más información

CONTROLS  PLC SIEMENS S7 300 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 30 mm  length min.: 250 mm  lenght max.: 700 mmSystem consists of:+ COMPINA A2.19153 handling system, year 2000+ MAE M-AH 6 automatic pipe straightening machine, year 2012+ Bühlmann (system construction), year 2000

Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información

CONTROLS  PLC SIEMENS FEEDSTOCK STEEL STRIP  sheet width max.: 450 mm  sheet width min.: 90 mm  sheet thickness max.: 13 mm  sheet thickness min.: 2 mm  exterior coil diameter max.: 1900 mm  exterior coil diameter min.: 1100 mm  internal coil diameter max.: 760 mm  internal coil diameter min.: 610 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 30 mm  external diameter max.: 140 mm  wall thickness min.: 2 mm  wall thickness max.: 12 mm  length min.: 4000 mm  lenght max.: 10000 mmLINE CHARACTERISTICS  Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min  feedstock transport direction: left to right Line consists of:- Strip prepara ...

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

FEEDSTOCK TUBE  external diameter min.: 60 mm  external diameter max.: 180 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 50 mm  external diameter max.: 168 mm  length min.: 4000 mm  lenght max.: 12500 mmCHARACTERISTICS DRAWING MACHINE  force: 2000 kN  drawing length max.: 12500 mm  number of parallel trains / strands max.: 1   speed max.: 40 m/min  etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter:  33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 200 mmDrawing dia ...

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

FEEDSTOCK TUBE  external diameter min.: 38 mm  external diameter max.: 130 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 550 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 100 m/min  pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end length: 230 mmmin ...

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible. ... más información

CONTROLS  PLC SIEMENS S5 115 U FEEDSTOCK TUBE  external diameter min.: 18 mm  external diameter max.: 127 mm  length min.: 3000 mm  lenght max.: 12000 mmModernized:1996 pipe length increased from 8.5 to 12 meters2000 cross chain added on the rightmin. base length of hexagonal bundles: 150 mmmax. base length of hexagonal bundles: 350 mmmax. bundle weight: 4'000 kgmax. tube weight: 30 kg/mincl. scale BUSCH EMWincl. data recording station BUSCH 875

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm ... más información

FEEDSTOCK TUBE  external diameter min.: 22 mm  external diameter max.: 140 mm  wall thickness min.: 1 mm  wall thickness max.: 14 mm  length min.: 4500 mm  lenght max.: 12500 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM- Replacement demagnetization Nukem- Replacement inspection electronics