subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 107)
Description: connected load: 400V max. coil width: 600mm mandrel diameter: 80mm weight approx.: 183 kg, Approx. Onsite Dimension. (l x w x h): 1,660 x 800 x 830 mm ... más información
Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Machine is suitable for heavy-duty use.Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.Working width: 650 - 1650 mmMaximum part weight: 2000 kgWide belts with abrasive belt unwinding: 3250 mmAs standard with vacuum hold system, optional with magnetic hold systemBy using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up ...
Description: Inner diameter: 220 mm Inner belt width: 200 mm Load capacity per reel: 150 kg (reel must be bolted to the floor) , Incl. wiring diagram weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,240 x 1,120 x 2,200 mm ... más información
Description: incl. operating instructions New machine!weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 4,150 x 2,400 mm ... más información
Description: Voltage 380 V Capacity: 6-30m/min weight approx.: 920 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,530 x 1,700 mm ... más información
Description: Diameter : 300 mm Clamping range: max 180 mm Material width: max 530 mm right and left rotation Manual spreading weight approx.: 664 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 800 x 1,300 mm ... más información
Description: Control unit type ZHS-2/64 Nominal pressing force: 100 kN max. Nominal pressure: 6.5 bar Overrun time: 60 m sec Overtravel: 12 mm Safety distance: 110 mm weight approx.: 598 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 2,100 mm ... más información
Description: mechanic Approx. Onsite Dimension. (l x w x h): 600 x 660 x 2,005 mm, weight approx.: 133 kg ... más información
The MTM-KA1000 multi-electrode machine is designed for the production of masonry mesh from round bars straightened and cut to the required size. The length of the welded mesh can be any and depends only on the length of the longitudinal rods. The width of the welded mesh is 350mm -1000mm; The diameters of welded rods are 3mm -6 mm; Distances between the axes of the rods: transverse 50mm - 200mm; longitudinal 50,100,150,200mm; Rod material: low-carbon steel, smooth or BP; The number of welded transverse rods is 40 pcs/min; Rated voltage 3 ph. mains, 50 Hz, 380V; Maximum power consumption 75-100 kVA; Compressed air pressure in the network, MPa (kgf/cm2) 0.63 (~6.3); Free air flow 2 m3/min; Overall dimensions 1800x1800x1700 mm; Weight 2000 kg
Hydraulic press brake 160t / 3200mm with controller E21 (automatic adjustment of the back stops). The status of the new machine Year 2016 ... más información
The line has undergone commissioning and is in good condition. Not used. It is under conservation. Rod diameter from 5mm to 12mm; Mesh width 800mm-2500mm; The pitch between the axes of the transverse rods (multiples of 50mm) is from 50mm to 300mm; The pitch between the longitudinal bars is from 100mm to 300mm; Welding speed of cross bars is 55-80 cycles/min. n Line composition: Main machine - 1 piece; Chiller - 1 piece; Compressor - 1 pc.; Dryer - 1 pc.; Receiver 1000 liters - 1 piece; Operator control panel (in Russian) - 1 pc. Optional equipment: The machine cuts correctly. Rod diameter from 5mm to 12mm; The length of the rods is 6 m; Speed 130m/mi. Specifications Power supply: alternating three-phase current 380V 50 Hz; Cascade welding mode; Transformer power 150 kW - 12sh; Peak power 315-630 kW; Nominal pressure, air flow 06.-10.0MPA, 130m3; Supply voltage 3 p ...
Table size 3000 x 1500 mm Changing table Complete with extraction and cooler 3kW Rofin source Source was overhauled 3000 hours ago ... más información
sheet width: 1020 mmplate thickness: 5 mmroll diameter: 110 mmweight of the machine ca.: 0,55 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
We sell Turret punch press - MP10-30 used, 2007, manufacturer JIANGSU YANGLI GROUP CO. Possible leasing, rent-to-own. They are also interested in intermediaries with a place to store equipment (they are ready to pay for rent). MP10 CNC series punching machine has a body structure (ZL2004 2 0108852.4), which adopts tempering treatment. German I + L. The hydraulic system has reliable performance and low power consumption (1 1 kW). FANUC CNC system OIS or SIEMENS 840D is used on this punch series. The revolving type (ZL 022 1821 1.X) features a long sleeve structure and the station index has a sectional wheel and a worm gear.
material width:180 mmcoil weight:0,75 tmaterial thickness:2,0 - 6,0 mmcoil external diameter:400 - 1250 mmno. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/minpower requirement:4,0 kWweight:2,8 tdimensions (WxDxH):1,4 x 2,45 x 1,85 msnubber roll:pneumatic ... más información
4-roll Hydraulic plate bender 8000 x 40 mm. 1960 Froriep 8000Х40 mm Plate rolling machine - 4 rolls 8000Х40 mm ... más información
Valley. Crank shears with an inclined blade for a sheet of 20x2000 mm, model NLZ427B, are designed for cutting sheet metal with a thickness of up to 20 mm and a tensile strength of S 500 MPa. Scissors can be used in the procurement workshops of metal structures, machine-building enterprises, repair and other plants, when used in climatic zones with a temperate and cold climate version UHL, dry and humid tropical - version O; placement category 4 according to GOST 15150 - 69 The lower value of the air temperature must be at least +5 0С. Designed for cutting metal up to 20mm thick 1. Maximum cutting force, kN 1000 2. The largest dimensions of the metal being cut with temporary 3. resistance
Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.
material width:150 mmmaterial thickness:1,5 mmpower requirement:3,0 kWno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:4 weight:0,67 tDimensions (WxDxH):1,3 x 1,1 x 1,6 m ... más información