trabajo con chapas de metal usadas para la venta

pressure: 170 tchamfer lenght: 4080 mmdistance between columns: 3680 mmcolumn arm: 410 mmdayligth: 385 mmstroke: 215 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 200 mmtable height: 1050 mmtravel -x axis: 600/860 mmNumber of working hours: ~ 23.280 hoil volume: 350 ltotal power requirement: 29 KVAweight of the machine ca.: 16.450 kg.range L-W-H: 4620 x 2210 x 2885 mm Machine in a well-maintained condition ()Furnishing:- CNC electro-hydraulic press brake/die bending press- DELEM CNC control - swiveling at the front left high resolution graphic screen Clear, concise menus in the operators language Large tools and products library 2D graphical programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front- CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 axis- X axis - adjustment speed: 500 mm/sec. Ma ...

Description: Max. cutting length 6000 mm, estimated material thickness 6 mm, cutting gap, backgauge and material thickness can be entered via digital display, for further details see photosplate thickness: 6 mm, weight approx.: 24,000 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,500 x 2,600 mm

sheet width: 0400 mmcoil outside dia.: 1400 mmweight max. in kg: 3000 kgplate thickness: 0,80 - 4,50 mmnomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mmfeed rolls: 2 exit pinch rolls: 2 coil width: 600 mmrange of expansion ca.: 470 - 530 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler DIMECO type 2371 E-FPSYear of construction 2006with hydraulic spreadingwith pneumatic pressure roller from abovewith 6 pieces of band limiting armsStraightening machine DIMECO type 1676 C-VVYear of construction 2000with frequency-controlled drivewith hydraulic band insertion aid with support table, insertion tongue,Pressing arm from abovewith pneumatically ventilated rollerwith side belt guide rollerswith pneumatically adjustable belt transfer tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: CAT 40 spindle drive: 7,5/11 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle Machine documentationWorking hours (date 9. April 2024):- Control on: 60.901 h- Machine on: 59.590 h- Program cycle: 22.283 h- Spindel on: 1 ...

Description: Drive motors Material rotation: 2x 1.5 kW Cutting arm/unit: 2x 0.7 kW KRM unit: 2x 0.75 kW Control system: Siemens Simatic MMI C7-635 Working width: max. 500 mm Diameter: max. 300 mm Operating voltage: 400V / 50Hz Operating pressure: 6 - 7 bar Operating instructions control CD with program and FI parameters hydraulic plan and circuit diagrams are available Approx. Onsite Dimension. (l x w x h): 3,700 x 1,600 x 2,050 mm, weight approx.: 1,300 kg

Approx. Onsite Dimension. (l x w x h): 1,173 x 1,123 x 1,136 mm, weight approx.: 330 kg ... más información

Description: serial number: 275  , workpiece thickness: 3 mm workpiece length: 2060 mm plate thickness: 3 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,300 x 2,100 mm ... más información

Description: sheet metal punching machine EDEL Stanzomat 410 - 20 with CNC technology serial number: 2811388 control: EF200S  , well preserved , possibility of manual and automatic operation (saved programs) include many tools, original instructions in German  , please also have a look at the PDF document of this machine weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,000 mm

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 5900 €: 1350 mm: 3 mm: 35 1/min: 1,5 °: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1700 mm: 1350 mm: 1200 mm: 950 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside support arm2 supporting armsuser manual in GERMANdoes not complie with the German UVV and Austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: max. disc diameter: 35 mm incl. various stamps: A22 / A34 / A41 / A43 / A50 / A60 Discharge height: 920 mm with hydraulic unit Pressing force. approx. 5-10 tons Machine comes from a stock liquidation of a large German industrial group and was equipped accordingly UVV compliant. Steel blanks were stamped with this machine. Used, in good condition and fully functionalApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 160 mm, weight approx.: 355 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 82900 €: 1666.29 €: 2050 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 280 mm: 280 mm: 220 mm: 1,5 / 5 m/min: 16,5 kW: 4350 mm: 1700 mm: 1850 mm: 8550 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was ...

Description: Max. Coil weight: 114 kg Max. Coil outer diameter: 762 mm Max. Material width: 152 mm Center diameter: 229-508 mm Maximum speed: 80 rpm weight approx.: 318 kg, Approx. Onsite Dimension. (l x w x h): 1,350 x 850 x 1,600 mm ... más información

Description: Diameter : 340 mm Clamping range: max 180 mm Material width: max 370 mm right and left rotation Manual spreading weight approx.: 488 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 1,000 x 1,100 mm ... más información

Description: Diameter : 510 mm Clamping range: max 160 mm Material width: max 500 mm Operating voltage: 220/380 V, 50 Hz power supply: 220 V weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,550 x 1,450 x 1,160 mm ... más información

Description: connected load: 400V max. coil width: 600mm mandrel diameter: 80mm weight approx.: 183 kg, Approx. Onsite Dimension. (l x w x h): 1,660 x 800 x 830 mm ... más información

Description: Inner diameter: 220 mm Inner belt width: 200 mm Load capacity per reel: 150 kg (reel must be bolted to the floor) , Incl. wiring diagram weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,240 x 1,120 x 2,200 mm ... más información

Description: incl. operating instructions New machine!weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 4,150 x 2,400 mm ... más información

Description: Voltage 380 V Capacity: 6-30m/min weight approx.: 920 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,530 x 1,700 mm ... más información

Description: Diameter : 300 mm Clamping range: max 180 mm Material width: max 530 mm right and left rotation Manual spreading weight approx.: 664 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 800 x 1,300 mm ... más información

Description: Control unit type ZHS-2/64 Nominal pressing force: 100 kN max. Nominal pressure: 6.5 bar Overrun time: 60 m sec Overtravel: 12 mm Safety distance: 110 mm weight approx.: 598 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 2,100 mm ... más información