máquinas talladoras de engranaje usadas para la venta

max. wheel diameter: 20 - 2650 mmgear width: - mmmax. module: 32 distance between centres: 1850 workpiece weight max.: 10.000 kgMachine can be inspected under power.Setting-up and installation at the customers is possible against extra charges.Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2400 mmgear width: 600 mmmax. module: 30 Control: Sinumerik 840 D workpiece external diameter max.: 3400 rim strength max.: 500 radial slide travel: 1050 mmaxial slide travel: 1600 mmswivelling range milling head: +- 15 °table diameter: 1870 mmtable hole: diameter: 600 mmdepth: 875 mmtable load capacity - central/maximum: 30000 kgworkpiece: tip circle diameter: 440 mmroot circle dia. min.: 310 mmcutter width - max.: 120 mmtotal power requirement: 100 kWweight of the machine ca.: 37,5 tdimensions of the machine ca.: 12,3 x 5,6 x 4,4 mmachine can be used only for internal gears - dry cutting typeEquipment/accessories:- column increased- internal head IKF2- big clamping table- documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mmgear width: 457 mmmax. module: 12,5 min. module: 2 spindle bore: 222 mmstroke: 15-120 Hub/minroll feed: 0.3 - 0.84 mm/mindown feeds: mm/Hubelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 10 kWweight of the machine ca.: 20 tdimensions of the machine ca.: 3,5 x 3,3 x 2,5 mEXTERNAL GEARS:Blank diameter:- Max 63 1600 mm Min 0 0 Face width, double helical 0 - 18 0 - 457 mm Face width, spur or single helical 0 - 10 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66 1676 mm Face width 0 - 8 0 - 203 mm P.C.D.:- Max 66- (2 x rim thickness) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 250 mmgrinding length: 500 mmthread pitch: - mmtread diameter: 2 mmclamping length - spindle head right: 900 mmspindle bore: 66 mmclamping length - spindle head left: 1020 mmworkpiece weight: 200 kgpitch: 0,8 - 288 mmpitch angle: +/- 40 °workpiece turning speeds: 0,4 - 50 U/mingrinding wheel width: 8/13/16/20/30 mmtable feed: 1500 mm/mingrinding spindle speed: 1900-2450 U/minno. of feed: 12 max. thread profile: 12,5 Modulnumber of starts: 1 - 8 dia. of hole: 160 mmgrinding wheel diam. min/max.: 275 / 350 mmgrinding motor: 16 kWelectrics - voltage/frequency: 3 x 380 / 50 V/Hztotal power requirement: ca. 20 / 45 kW / KVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,7 x 4,7 x 2,6 mprofiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with:- CNC control Grossenbacher AG / Reishauer modell FMS 6- CNC profiling device IBH with hand contr ...

max. wheel diameter: 400 mmgear width: 200 mmmax. module: 10 min. module: 1 profile depth: 25 mmx-axis: 630 mmy-axis: 400 mmz-axis: 190 mmU-axis: 80 mma- axis: 360 °b-axis: +/- 30 °max.helical angle: 30 °grinding wheel diameter: 250 - 350 mmspindle speeds (infinitely variable): 1500 - 2800 U/mingrinding slide feeds: 6000 mm/mincenter distance betw. workpiece-tool min/max.: pitch max.: 9000 mmpitch min.: 10 mmelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 38 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,2 x 2,6 x 2,8 mhorizontal Profil Gear Grinding Machine for Spur and Helical External Gears.Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with:- CNC Control FANUC 0i-MF-- for 6 Controlled Axis (4 simultaneously)- Gear Measuring System- Chip and Sludge Removal System- Paper Band Filter and magneti ...

max. wheel diameter: 1600 mmgear width: 250 mmmax. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mmbase circle dia. - min.: 150 mmspecimen weight from/to: 4000 kgfeeler adjustment movement - parallel: 1400 mmmax.helical angle: 0 - 90 °wheel diameter with counterstay: 1000 mmfeeler adjustment movement - parallel: 800 mmcentre height: 1150 mmelectrics - voltage/frequency: 400 / 50 V/Hzdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mtotal power requirement: 2 kWweight of the machine ca.: 3 tUniversal Involute and Helix Testing Machine - modernized 1995Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping andshaving cutters. Following tooth data can be t ...

max. wheel diameter: 3000 mmgear width: 1200 mmmax. module: 30/40 min. module: 2 table diameter: 2500 mmtable load capacity: 400 kNhob dia. - max.: 450 x 500 mmmilling spindle speeds: 10 - 165 U/minhob length max.: 500 mmtip circle diameter: 2050 mmtooth helical angle min/max: 0 - 45 °center distance betw. workpiece-tool min/max.: 150 - 1750 mmmilling slide swivelling: 50 Graddistance table / counter stay: 1050 - 2050 mmshifting: 300 mmworkpiece weight: 40 ttable bore diameter: 800 mmdepth of hole: 1100 mmmain drive motor: 37 kWmin. workpiece diameter: 290 mmmin. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/minradial feed: 1 - 500 mm/minfeed: Tangential 1 - 450 mm/minrapid traverse: 1875 / 530 / 470 mm/minelectrics - voltage/frequency: 380 / 50 V/Hzcontrol: Siemens Sinumerik 3M total power requirement: 125 kVAweight of the m ...

max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 125 mmdrawing length: 1250 mmpulling force - max.: 5 tstroke length max.: 925 mmtable surface area: 550 x 700 mmworkpiece weight: 6000 kgcutting speed: 1 - 12 m/minreturn speed: 2 - 24 m/minfeed: 0,219 mm/DHtotal power requirement: ca. 5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 1,5 x 1,5 x 3 m- quick adjustment for the Feed- automatic return adjustment- Oil Tank with pump- 3 Tool Cabinets- large set of toolings + accessoriesTools for drawing length: bis 150 / 300 / 500 / 1000 / 1250mmas shown on picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: - mmtable width: - mmgrinding wheel diameter: 400 mmmax. width of grinding wheel: 50 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1 x 1 x 1 mFor Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly to profilegrinding wheels for two-flank grinding, module 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 650 mmgear width: 200 mmmax. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mmtable bore diameter: 150 mmnumber of strokes - stepless: 35,5 - 560 c/minmax. ram stroke: 230 mmfeeds: 3,55 - 40 mm/minradial feed: 0,8 - 9 mm/minwork-spindle diameter: 110 mmtotal power requirement: 28,2 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 3,8 x 2,3 x 2,5 mGear shaping machine for the production of spur gears, forInternal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630complete Modernisation + overhaul in 2012 with:- new painting- new electrical system from Telemecanique- Counter Holder- Chip conveyor- Coolant unit- change gearsNot used in production again after overhaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mmgear width: 120 mmmax. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kWweight of the machine ca.: 7500 tdimensions of the machine ca.: mL I E B H E R RCNC – Controlled Gear Hobbing MachineType LC 82Baujahr 1995 Ser.-Nr. 0836______________________________________________________Gear-Diam. max. 80 mmModule Range 1 - 3 Helix Angle +/- 45 °Distance Table Center to Tool Center 15 – 160 mmHobbing Head Slide stroke vertical 250 mmTangential Travel / Shift Travel of Tool slide 180 mmMinimum Number of Teeth 3 (!)Hob Size max. Ø x length approx.  ...

max. wheel diameter: 900 mmgear width: 500 mmmax. module: 1 min. module: 10 total power requirement: 16 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. wheel diameter: 400 mmgear width: 280 mmmax. module: 1 min. module: 4 total power requirement: 15 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 min. module: 12 total power requirement: 8 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mD O N A U - K N A P P (Germany)Universal Automatic Rack Milling MachineModel UZFM – V 300 H Year approx. 1980 Serial No. 80-234xMax. length of rack 1,750 mmMilling travel / milling width cross max. 260 mmModule, steel / cast iron 10 / 12Table clamping size 275 x 1,850 mmMounting height below cutter, depending on cutter Ø 136 – 410 mmCutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mmCutter width max. floating / with support 50 / 140 mmCutter mandrel Ø max.  ...

max. wheel diameter: 400 mmgear width: 75 mmmax. module: 0,5 min. module: 6 total power requirement: 25 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. wheel diameter: 80 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgM I K R O N (Switzerland)Fully Automatic Gear Hobber for Worm GearsModel A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15_____________________________________________________ _______max. gear- without feed magazine approx. 80 mmmax. gear- with feed magazine approx. 50 mmModule max. 2, / 2,5 Axial milling length approx. 150 mmmax. workpiece-mounting length approx. 200 mmMilling slide can be swivelled up to 90 degreesMilling cutter - 24 - 50/63 mmMax. radial distance of milling slide 0-14/18 mmMilling cutter adjustment max. 25 mmMilling cutter speed 212 - 2.000 rpmAxial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation  ...

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmgear width: 275 mmgear width: 275 mmmax. module: 6 weight of the machine ca.: 5,3 tshifting: 100 mmdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.