máquinas talladoras de engranaje usadas para la venta

weight of the machine ca.:8 tdimensions of the machine ca.:2,95 x 1,6 x 2,36 mchucking diameter:250 mmswing diameter:265 mmx-travel:170 mmz-travel:200 mmspindle turning speed range:1.500 U/minspindle bearing diameter:100 mmPick-up machine ... más información

max. wheel diameter:1500 mmgear width:600 mmmax. module:16 min. module:1 total power requirement:38 kWweight of the machine ca.:18,7 tdimensions of the machine ca.:7,7 x 3,6 x 4,5 m mRetrofit in 2004, original from the 80s No internal hobbing device ... más información

max. wheel diameter:130 mmgear width:170 mmmax. module:3 min. module:0,5 total power requirement:48 kVAweight of the machine ca.:9 tdimensions of the machine ca.:7,64 x 3,14 x 3,25 mFor technical data, see PDF-File enclosed ... más información

Dressing diameter:110 Planing width:9999 min. module:0,5 max. module:10 spindle turning speed range:2800 1/minpressure angle: 15 - 25 ° °run-out tolerance:0,001 mmWeight:22 kg ... más información

max. wheel diameter:400 mmmax. module:10 min. module:0,3 weight of the machine ca.:11,5 tdimensions of the machine ca.:3,3 x 2,75 x 2,8 mmax. number of teeth:999 min. number of teeth:5 Width of teeth:0-300 mmpressure angle max.:30 pressure angle min.:14 workpiece weight max.:300 kgworm grinding diameter:300...205 mmwidth of grinding worm:125+0,7 / -0,5 mmboring diameter:160 H7 mmwith loading device FELSOMAT Type: FZ250 Year of construction: 2002 No tail stock

max. wheel diameter:275 mmgear width:55 mmmax. module:6,5 min. module:1,5 Face Hobbing-Continious ProcessContinuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surfaceC28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, workpie ...

workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:24 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:52 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

max. wheel diameter:90 mmgear width:300 mmmax. module:3 tip circle diameter:max. 65 mmroot circle dia. min.:28 mmmax. geared Length:150 mmtool length - max.:203 mmtangential ( y-axis ):140 mmaxial ( z-axis ):400 mmTailstock ( z²-axis ):350 mmloading and unloading portal ( z³-axis ):1850 mmmilling head -swivable +/-:+ A = 40 / - A = 40 °working piece table: max. outer diameter / bore hole:120 / 45 mmfeeds X-axis:1 - 10000 mm/minfeeds Z-axis:1 - 10000 mm/minrapid power traverse in X-and Z direction:10000 m/minrapid motion - y-axis:5000 mm/minfast rapid z²-axis ( tailstock ):10000 mm/min.speeds of tool:300 - 4000 U/minworking piece table speed:0 - 1000 1/min.connected load:44 kVAvoltage:400 Vcontrol voltage:24 kWweight of the machine ca.:7500 kgdimensions of the machine ca.:3170 x 2975 x 2440 mm

weight of the machine ca.:5 t ... más información

weight of the machine ca.:4 t ... más información

 ... más información

Description: Machine Type: flat superficies , Dimension grinding wheel: 300 x 40 mm Hydraulic operation , Max. grinding area: 670x470x400 mm Magnet plate , Installed power: 3.2kw  ,weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,885 x 1,900 mm ... más información

Description: SN 13135 Toothing width - max. 25 mm Pitch circle diameter - external toothing 120 mm Pitch circle diameter - internal toothing 120 mm z-way 150 mm Spindle diameter 85 mm Mounting taper - steep taper PKP 45 Workpiece table - Ø 160 mm Table bore 63 mm Stroke rate - infinitely variable 500 / 2500 strokes/min Workpiece speed max. 125 1/min. Bevelling angle - max. + / - 45 ° Tool diameter max. 125 mm Table load max. 1000 KG Minimum distance table surface - tool spindle 0 / + 180 mm Maximum distance table surface - tool spindle 200 mm Maximum distance table surface - tool spindle 350 mm Connected load 40 kVA Description: Motorised stroke adjustment, workpiece storage, automatic workpiece change, chip conveyor (magnetic), coolant device Dialogue program, fault diagnosismax. wheel diameter: max. 250 mm, module min./max.: max. 3,5, control: SINUMERIK 840 C Siemens, stroke lengt ...

Description: See photos for detailsweight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,600 mm ... más información

Description: SPECIFICATIONS Character: DMF Type: 8U300 Machine weight: 1,800 kg Measuring length: 300 mm Sheet thickness: 8 mm Machine weight: 1,800 kgweight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 1,200 mm ... más información

Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the technical data and layout plans in the PDF file.max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS Sinumerik 840 D, tab ...

workpiece diameter: 125 mmmodule: 4 Control: SIEMENS 840 C x-axis: 105 mmy-axis: 40 mmz-axis: 500 mmtotal power requirement: 47 kVAweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2,6x2,1x3,1 mwith measuring and palletizing system from Hörzer & Fehrenbachfor gearwheels (bore receiver)Workpiece diameter: 17-39.5 mmComponent height: approx. 6-15 mmOblique as well as straight toothedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 80 mmmodule: 2,5 mmfixture slide travel: 220 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mmcutter length max.: 160 mmturning speed range: 200 - 5.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached exhaust system for dry processing: Ringler,- Noise insulation for dry milling machine- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- coolant device,- Automation unit: AMZ,The machine is in very good condition.For additional equipment information please referto the origin ...

workpiece dia.: 100 mmmodule: 3.0 mmfixture slide travel: 400 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mmcutter length max.: 180 mmturning speed range: 50 - 12.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached extraction system: Ringler,- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle - AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- Workspace,- tailstock,- measuring device,- refrigeration system,- Industrial robots: Epson,- goods carrier,- conveyor belts,- control panel,The machine is in very good condition.For additional e ...