máquinas de bebidas usadas para la venta

Beer Storage Tanks, Stainless Steel, Horizontal 6 x 12000 L Beer lager house with 6 stainless steel horizontal pressure tanks installed in stainless steel tank rack which keeps tanks in two layers for saving floor area. Originally these tanks were designed for Weiss Beer and therefore max operating pressure can be 5.8 bars. Tanks are jacketed and cooled with glycol-water solution from sides of the tanks. Tanks are equipped with pressure safety valves, CIP bowl, temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - Lager Tank Gross 3 x 12000 liters, work pressure 4 bars, year 1980 - Lager Tank BAM Freising 3 x 12488 liters, work pressure 5.88 bar, year 1974 - Tank material Werkstoff 1.4541 (10 CrNiTi 18) - One stainless steel rack for supporti ...

Cylindrical Cone Fermenting Tanks CCT 8 x 150hl Cylindrical cone fermenting tanks (CCT) with net capacity 150hl. Tanks are vertical indoor type with 80 mm PU insulation, self-standing on four legs, with three (glycol) cooling zones, two on the side + one in cone. Tanks have cooling control system for each tank and each zone separately, sampling valve on outside on tank skirt, two CIP panels which are connected to tanks, inside tank rotating CIP ball and normal under pressure and overpressure safety valves on top of thanks. Generally, tanks are in good condition, and they have a high hygienic level. These CCTs have a dedicated chiller made by made by Italian Rhoss S.P.A in year 2015. Compressor is a scroll type, rotary, hermetic and with Inverter actuation (1+i) complete with thermal protection and casing heater. Cooling refrigerant is Freon R410R. Chiller is air cooled by two axial f ...

Overview  The bottle washer was produced in 1980 by the German manufacturer Seitz Enzinger Noll. Until recently it was in use in a German brewery. As the complete line was sold with the exception of the bottle washer, it is now for sale separately. Technical details Capacity: 1,500 bph Stainless steel spray nozzles  Bottles per row: 8  Most recently run formats:  0.33l, 0.5l, 0.7l, 1.0l  Suitable for very long bottles, e.g. wine bottles and bottles with swing tops  Heat exchanger that heats up the lye  Manual dosing of the lye concentration according to time Long caustic immersion bath with label discharge via sieve  Lye spraying from inside and outside  Fresh water spray from inside and outside

AT82 ... más información

Used Case Divider Inserter APE year 1998 Introduction In the world of bottling every detail matters Moreover the efficiency and reliability of the APE Case Divider Inserter can make the difference between a smooth production line and additional costs due to unforeseen interruptions The APE 2001 Model A Pillar of Reliability This machine has been a benchmark in the bottling industry since its launch in 1998 This model is designed to accurately and swiftly insert dividers into 6 and 12 bottle cartons ensuring efficient and uninterrupted production flow Key Technical Features The robust design of the APE Case Divider Inserter and its advanced technology ensures consistent performance even in high production environments Additionally the divider insertion system has been optimized to guarantee precise and uniform positioning minimizing waste and enhancing packaging quality Operational Advant ...

Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder ... más información

Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customers needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition th ...

Used Case Erector APE up to 9000 boxes hour Introduction of the Case Erectort APE The used APE case erector capable of handling up to 9000 boxes per hour It stands as an indispensable machine in the bottling process Performance and Specifications Primarily the APE case erector is meticulously engineered to operate at an impressive speed of 9000 boxes per hour It thereby ensures a seamless and highly efficient flow along the production line Equipped with an advanced glue closure system it guarantees indeed a secure and steadfast sealing of the boxes Thereby drastically reducing the likelihood of leaks or damage during transit Safety Features Undoubtedly safety remains paramount within any industrial setting Hence the APE case erector is outfitted with an array of cutting edge safety features meticulously designed to safeguard operators throughout the operational cycle These include but ar ...

Overview  The water treatment plant consist of an activated carbon filter, a UV treatment and a reverse osmosis system. Additionally it is combined with a SIP cleaning system. The unit was installed and designed in 2007 by PWT. Since then it has only been used a couple of times, in total less than 100 operating hours. The system is still installed, under power and can be demonstrated. Technical details  Capacity: Currently installed: 6,000 l/h Can be upgraded up to 20,000 l/h GEA plate heat exchanger Schärf u. Schall activated carbon filter WEDECO BX50 UV Reactor Integrated SIP system

Neuhaus Neotec cylinder grinder capacity 500kg/h filter, 25kg/h espresso grind power 7.7 kw length 740mm width 750mm height 1590mm/ ... más información

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

Overview The empty bottle inspector Linatronic was manufactured 2011 by German company Krones. The machine is already dismantled. Techn. Details Running direction: left-right Detections: Ground inspection Camera Sealing surface inspection camera  Thread inspection camera with cone optics  Sidewall inspection camera  Residual liquid and residual caustic detection By high frequency By infrared  Design of muzzle illumination DualFlash for more precise inspection of the sealing surface Scope of delivery Ejector before machine   Rejector belt for color and break in bucket, Rejector belt to return to washing machine

Overview The pallet winder was built in 2013 by Italian manufacturer Robopac. The machine is in good condition and available immediately. Technical Details  Capacity: up to 80 pallets/ h  Product dimensions Pallet: 800 x 1200 mm Product: 750 x 1150 mm - 850 x 1250 mm  Min/ Max. height: 450/ 2200 mm  Operating hours: 64751h CE-certified Scope of Delivery Electrical cabinet Pallet conveyors according to layout Cover sheet support Pallet lifting station Inlet/outlet light barrier Safety fences according to layout Compressor Extensive technical documentation 

Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...

Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg

Overview The palletizer was built in 2007 by Slowenian manufacturer I.H.S. The machine is in a very good condition and can be visited. Techn. Details Last used for palletizing: PET Bottles – Film only Capacity: up-to 300 layers/hour Intermediate layer insert For loading of various types of packed products High flexibility: suitable for a large scope of products (mostly used for wrap-around cases and shrink-wrapped packs) Robust construction suitable for high loads and capacities Possibility of high or low infeed

Overview The BP 1800 briquette press was manufactured in 2003 by the German company Strautmann. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The briquette press is still assembled and electrically connected. Technical data   Filling opening: 950 x 1300 mm Size: 5595 x 1570 x 2000 mm  Installation area: approx. 5.8 m² without ejection chute Briquetting of  Cardboard  Paper  Styrofoam PET bottles Briquette dimensions: 200 x 200 x 100-300 mm  Briquette weight: approx. 200 to 450 kg/ m³, depending on material  Accessories Conveyor belt Distribution chute

We offer for sale a coffee roasting machine. Manufacturer PROBAT PROBATONE Type L12 E, heated by electro for roasting in batches of max. 12 kg. The machine was fully serviced. New bearings, newly lubricated with high-temperature petroleum jelly. The machine is equipped with new improved heating coils. Year of manufacture 2007. Installed input power 21 kW, 3 x 400V, fuse 32A. The machine is very reliable and fully functional. We can demonstrate the machine in operation.

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Used Shrink Wrapper Novopack 15 cps [...for more information send your inquiry to the seller.] refno: FA01 ... más información