subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 706)
GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200
Storage Tank/ Wine Tank in V2A Volume: 4.000 litre used - in very good condition Measurement and Weight: Total Height: 3650 mm Cyl. Height: 2700 mm Diameter: 1300 mm Weight: kg Material: V2A - AISI 304, 1.4301 Surface marbled outside Upper body: with torispherical bottoms 1 x thread connection DN 50 central Cylinder tank: 1 x ladder hook 1 x manhole 400 x 300 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve 1 x level indicator with bar and scale 1 x clap 1 x thread connection DN 50 side with blind cap Lower bottom: with torispherical bottoms 1 x forwards pulled rest outlet with butterfly valve DN 50 4 x calotte feet height adjustable
Cat. No. 08-1209 in very good condition! Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Catalogue-Nr 09-2060 in very good condition! Apex 1600 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red current Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt 1500 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg
Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg
Kat. No. 09-1590-4 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 contents: 1,200 litres diameter: 1,000 mm total height: 1,980 mm weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Kat-No 09-1025 New! made of stainless steel Make: Eurolux -very stable experience -Your advantage: can be used as a base frame and as an interlayer frame -All-sided (also with pallet truck) can be underrun Mass and weight: Total height:390 mm Width:760 mm Length:1250 mm Weight:27 kg Price is valid for one item. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
Kat-No 08-1208 in very good condition Stainless steel tanks installed made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW ... más información
Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body ...
Kat-No 08-1514 in very good condition - checked! Pump diagnostics: Pressure test: 4 bar Suction capacity up to -1.5 bar: -0.5 Conveyor pressure: 3 bar Power: 23,500 liters/h Ampere min/max: 3.8 Other pump types or our complete range (tanks, pumps, filters, beverage technology) on request! For questions call 09353 909050 or 0171 651 8248 Fax: 09353 9090522 All prices are ex works, plus Vat Intermediate sale reserved. Freight cost share: by scope of delivery Sightseeing is also possible on weekends or evenings by appointment.
Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece
Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
Steel pressure tank, enamelled (last content: fruit juice), operating pressure: 3 bar approx. 16.000 liters used - in very good condition UNI-KINN B-Nr. 19-801 GL Tank with vaulted bottom Operating pressure: 3 bar Measurment and Weight: Diameter: approx. 2.400 mm Total length: approx. 3.700 mm Weight: approx. 3 t on the top: 1 x air vent NW 50 on the front dished bottom: 1 x manhole 400 x 300 mm swiveling 1 x flange connection NW 50 1 x flange connection NW 40 as outlet Otherweise see photos
Storage tanks outside marbled for wine, water, fruit juice, schnapps 1.000 liters NEW! Measurement und weight: Diameter: 920 mm Total height: 2150 mm Cylinder height: 1500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on ext ...
Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedi ...
Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 0935 ...
Storage tank outside marbled for wine, water, fruit juice, liquor content: 2,000 litres NEW! Dimensions and weight: Total diameter: 1110 mm. height: 2650 mm Cyl. Height: 1500 mm Material: V2A - AISI 304, V4A - AISI 316 surface: top shelf: V2A = 304, inside outside marbled IIID Cylinder: 304 = V2A, inside IIID, outside marbled floor: 316 = V4A, 2 B = IIIC marbled top shelf: conical bottom 1 x loading and venting connection DN50 2 x lifting eyes Cylindrical tank: 2 x Head hook 1 x manhole front oval 430 x 320 mm swivel with bracket and bracket 1 x tasting valves DN 15 (extra charge) 1 x Tauchschaftshülse for temperature display (extra charge) 1 x thermometer digital (surcharge) 1 x indicator bar with scale 1 x clear drain valve DN 50 and DN 50 (surcharge) end cap Underbody:-Conical spout flooring 1 x front drawn with valve DN 50 and DN 50 (surcharge) end cap 3 x len ...