subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 706)
Neuhaus Neotec cylinder grinder capacity 500kg/h filter, 25kg/h espresso grind power 7.7 kw length 740mm width 750mm height 1590mm/ ... más información
Overview The FAMIX 30000 2 - components mixer was built in 2003 by the German manufacturer H. FALTERBAUM FAMIX-MASCHINENBAU GMBH. The machine is out of operation since seven years and therefore needs some replacement like gaskets. Technical Details Capacity: 30,000 l/h Siemens S7 control Two components (water, syrup, CO2)
Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till autumn 2024. As the selling brewery is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. The machine has gripper starts, which allows quick changeovers and multiple bottle formats with changing only low number of parts. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Tech. Details Output: 35,000 – 40,000 bph Formats: 0,33 l Longneck 0,5l NRW 0,5l Euro Pitch circle: 1200 mm Number of plates: 30 No servo drive of the plates Infeed and output direction parallel Rotation: counter clockwise 21,000 operating hours Glue pumps included Checkmat label inspection for label p ...
Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...
Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine. Technical details Capacity: 3.600 bph 3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm space requirement approx. 9x5 m² weight: 4,5 t Operating hours: 19.935 Bottles Volume: 250 ml - 2500 ml Max. Diameter: 110 mm Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).
Overview The empty bottle inspector Linatronic was manufactured 2011 by German company Krones. The machine is already dismantled. Techn. Details Running direction: left-right Detections: Ground inspection Camera Sealing surface inspection camera Thread inspection camera with cone optics Sidewall inspection camera Residual liquid and residual caustic detection By high frequency By infrared Design of muzzle illumination DualFlash for more precise inspection of the sealing surface Scope of delivery Ejector before machine Rejector belt for color and break in bucket, Rejector belt to return to washing machine
Overview The pallet winder was built in 2013 by Italian manufacturer Robopac. The machine is in good condition and available immediately. Technical Details Capacity: up to 80 pallets/ h Product dimensions Pallet: 800 x 1200 mm Product: 750 x 1150 mm - 850 x 1250 mm Min/ Max. height: 450/ 2200 mm Operating hours: 64751h CE-certified Scope of Delivery Electrical cabinet Pallet conveyors according to layout Cover sheet support Pallet lifting station Inlet/outlet light barrier Safety fences according to layout Compressor Extensive technical documentation
Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...
Overview The cardboard packer is located in Spain and is completely overhauled so that it can be shipped without problems. This machine gathers bottles, cans, etc. and places them in a cardboard sheet, which is then compressed to form a closed box. The maximum speed is 45 cartons per minute, depending on the format. The programmed machine can produce different formats.
Overview This plant can be used to pasteurize and fill into pouches (BagInBoxes). Most recently, sauces and dressings were filled with it. It consists of a pasteurizing and filling line from TetraPak/ AlfaLaval. The line components were manufactured in 2014 and the line has only a few operating hours, having run only two days a week. Technical data Pasteur | TetraPak/ AlfaLaval | Ohmic Heating | 2014 Capacity: 2000 kg/h 3 heating modules á 60kW Space requirement: 1000mm x 2700mm Tube heat exchanger| TetraPak/ AlfaLaval | - | 2014 Space requirement: 6200mm x 950mm Sterile tank| TetraPak/ AlfaLaval | - | 2014 Diameter: 1000mm Filler | | TetraPak/ AlfaLaval | C.A.F.1H/1 | 2014 Capacity: 250 bags/h (with 10l bags) Possible bag sizes: 2l - 25l Aseptic filling Space requirement: 5800mm x 1790mm
Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt ... más información
Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition. Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg
Overview This complete brewhouse was manufactured in 2016 by the German manufacturer Sudhausbau. The plant can be visited and tested at any time, as everything is still connected and in operation. Components Grist mill 1 piece grist mill 2 foot stands with rubber bumpers 1 additional larger hopper Throughput up to 200 Kg/h Brewhouse in stainless steel Cast wort/ brew 2 units steam heated Control system with automatic mashing Switch and control cabinet Completely wired and ready for connection Control cabinet assembly with: 1 x control via touch screen Siemens 9 1 x contactor circuit 0,37 KW agitator 1 x contactor circuit 0,37 KW chipper 1 x contactor circuit 230V/16A steam valve 2 x 24VDC outlet temperature sensor 2 x temperature measurement Analog input 4-20 Hardware and software The control unit with automatic mashing is designed for the connection of the agitator, chopper and 2 temper ...
Volume: 5000 lQuantity available: 2 pcs. Price per item. More then 300 machines new and second hand on our seema .de ... más información
Labeller wrap-around ca. 3000 b/hMore then 300 machines new and second hand on our seema .de ... más información
filler 6 valves semi automaticMore then 300 machines new and second hand on our seema .de ... más información
consisting of Protec X-Tri Optical Sorter- Slightly used- Price of new plant was 160.000 EURHow X-Tri works: grapes exiting the destemmers are distributed on the vibrating belt feeding the optical unit belt. The optical sensor detects the various defects (leaves, stems, insects and foreign bodies) and rejects them with a jet of air. The good product is unloaded directly into the crushing unit for subsequent processing. The optical system also detects unripe grapes (of different colour), that can be removed along with the other defects. The defects destined for removal can be set via the touch-screen. The X-Tri 100 line handles up to about 10 t/h of grapes. Capacity is relative to many factors, such as the type of grape, the degree of ripeness, the quantity of defects etc.More then 300 machines new and second hand on our seema .de
- fast, reliable, non-contact ink jet printer designed to provide versatile, uninterrupted operation in factory environments.- used to apply sell-by dates, batch codes, logos and other variable information to a wide range of substrates on the production line using ‘continuous ink jet’ printing technology. - printhead is attached to the rear of the printer cabinet by a flexible conduit.- during operation, the printer is located adjacent to a production line to allow printing onto the product as it passes the printhead.- a product sensor (such as a photocell) is normally used to detect the presence of the product and synchronize printing.- suitable for bottles, eggs, cartons, boxes- easy to use, settings for several products can be saved- thickness, font, inclination, etc. of the letters or numbers can be set on the machineMore then 300 machines new and second hand on our seema .de
ABSTANDSSTUCKMore then 300 machines new and second hand on our seema .de ... más información
Sheet filters 600x600 / 250 - Seitz OrionMore then 300 machines new and second hand on our seema .de ... más información