prensas usadas para venda

Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manufacturer: ABB Type: IRB ...

nominal force:100 tstroke:320 mmno. of strokes:35 /mindistance between columns:360 / 250 mmDistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:320 x 450 mmtable height over floor:660 mmram surface:250 x 280 mmspindle diameter:125 mmpower capacity:3,0 kWweight:4,5 tDimensions (WxDxH):2,0 x 1,6 x 3,1 m

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ram pin slots: 308 piec ...

Pressure:100 tdistance between columns:910 mmstroke:600 mmdistance table/ram, stroke up:1000 mmtable surface area:1340x680 / 910x1085 mmhole in the table:700 x 510 mmtable height over floor:800 mmside window:680 mmram surface:1230x680 / 910x1000 mmcapacity of ejector:7,5 tejector stroke:150 mmpower requirement:15,0 kWweight:9,5 tDimensions (WxDxH):2,3 x 1,9 x 3,6 mlight guard:Sick blank holder / ejector in ram:hydraulisch

Description: Serial Number: 74-20-0293 Width between uprights:  ,3700 mm , Table surface: 3350x2134 nn Punch stroke: 762 mm , Distance between plate: 1322 Strokes per minute: 16/min Table openings: 3 Main motor: 90 kw 1500rpm Punch Motor: 7.5kw 1500 rpm , Lubrication equipment: 0.75kw 1500 rpm , Pump motor power: 1.1 kw 3000rpm , Voltage: 220V, 50 hz Pneumatic installation: , Surface area: 1420x990 mm , Piston diameter: 800 mm , Stroke of plunger 305 mmm , Total power: 180Mp  ,Approx. Onsite Dimension. (l x w x h): 4,000 x 6,000 x 12,000 mm, weight approx.: 180,000 kg

pressure:150 tthroat:450 mmstroke:115 fix mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:2250 x 1090 mmtable height over floor:900 mmpassage to the back:1900 mmram surface:1900 x 900 mmram adjustment:100 mmpower requirement:16,0 kWweight:19,5 tDimensions (WxDxH):3,0 x 2,3 x 3,9 m

Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Gauge: Z1/Z2 Front Support Arms: 2 arm ...

pressure:200 tdistance between columns:1800 mmstroke:710 mmDistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:1600 x 1300 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:250 mmdie cushion area:1400 x 1080 mmtable height over floor:800 mmside window:1300 mmram surface:1660 x 1300 mmspeed down:400 mm/sspeed up:410 mm/sworking speed:14,3 - 49,7 mm/spower requirement:46,0 kWweight:25,0 tDimensions (WxDxH):3,65 x 3,3 x 5,4 mheight over floor:5,05 mheight beneath floor:0,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard at front and back:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical

Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 ,  ,V12 3215 ,  ,V24 3234 ,  ,V50 3223 ,  ,V100 3040 ,  ,V12 ,  ,26 gr. ,  ,  ,R3 Hemming die BMR 55.16.30 ,  ,  ,  ,  ,  , V16 30 gr. Top tool: 1310 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 85 gr. ,  ,  ,R0.8 H115 1030 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 88 gr. ,  ,  ,R0.8 H145 TOP.175.26. ,  ,  ,  , 26 gr. ,  ,  ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...

pressure:50 tdistance between columns:1750 mmstroke:500 mmDistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1700 x 750 mmtable height over floor:800 mmside window:650 x 750 mmram surface:1700 x 750 mmpower requirement:11,0 kWweight:11,0 tDimensions (WxDxH):2,1 x 1,15 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary

Description: working length: 2500 mm max. pressing force: 80 t manually adjusts the limiter possibility of adjusting the left and right sides by height no documentation  , please also have a look at the video of this machine Max. pressing force: 80 to, bending length: 2,500 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,600 x 1,650 mm

pressure:015 tthroat:200 mmstroke:4 - 70 mmno. of strokes:140 /mindistance table/ram, max. stroke up, adjustment up:310 mmtable surface area:430 x 395 mmhole in the table:165 x 160 mmtable height over floor:560 - 735 mmtable adjustable:175 mmram surface:160 x 130 mmram adjustment:80 mmpower requirement:1,2 kWweight:0,9 tDimensions (WxDxH):1,0 x 1,25 x 1,8 mclutch:Drehkeil overload protection in ram:mechanical

Description: press power: 63 t table dimensions L×W: 700x550 mm table opening LxW: 265X265 mm presser LxW: 320x300 mm presser stroke: 130 mm (fixed) max distance of the presser from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 pneumatic components: FESTO commands: single (foot-shoe, two-handed-lever), continuous (automatic mode-setting time interval 1-99999s and number of repetitions 1-32000) a special function for determining the lower position of the presser automatic lubrication of the machine pneumatic triggering and braking Max. pressing force: 63 to, stroke: 130 mm, table surface area l x w : 700x550 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,500 mm

pressure:030 tstroke:8 - 40 mmno. of strokes:100 - 600 /mindistance between columns:325 mmdistance table/ram, max. stroke up, adjustment up:250 mmtable surface area:540 x 300 / 325 x 395 mmhole in the table:315 x 110 mmtable height over floor:1000 mmcolumn travel -side:290 mmram surface:250 mmmaterial width of feeder:120 mmmaterial thickness of feeder:3,0 mmfeed length:60 mmpower requirement:5,5 kWweight:2,6 tDimensions (WxDxH):1,5 x 1,2 x 2,2 mclutch:pneumatic roll feed:mechanical, Bruderer BBV 120/60

pressure:100 tthroat:350 mmstroke:6 - 100 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:850 x 700 mmhole in the table:470 x 150 mmtable height over floor:855 mmram surface:450 x 300 mmram adjustment:80 mmpower requirement:7,5 kWweight:5,0 tdimensions (WxDxH):1,5 x 2,3 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

pressure:500 tdistance between columns:2240 mmstroke:1180 mmdistance table/ram, max. stroke up, adjustment up:1800 mmtable surface area:2050 x 1800 mmpressure of drawing cushion in table:250 tstroke of drawing cushion in table:380 mmdrawing cushion surface in table:1800 x 1200 mmpressure of drawing cushion in ram:122 tstroke of drawing cushion in ram:200 mmdrawing cushion area in ram:1800 x 1200 mmram surface:2215 x 1800 mmtable height over floor:500 mmspeed down:400 mm/sspeed up:10 - 400 mm/sworking speed:10 - 100 mm/sdepth of the foundation:3,0 mpower requirement:122 + 75 + 64,5 kWweight:110,0 tDimensions (WxDxH):3,6 x 2,2 x 8,5 mheight over floor:6,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table and ram:hydraulic

pressure:500 tdistance between columns:3200 mmstroke:1250 mmdistance table/ram, max. stroke up, adjustment up:1810 mmtable surface area:3000 x 1900 mmpressure of drawing cushion in ram:150 tstroke of drawing cushion in ram:200 mmdrawing cushion area in ram:2400 x 1200 mmram surface:3160 x 1900 mmspeed down:400 mm/sspeed up:250 mm/sworking speed:18 - 58 mm/sheight over floor:6,5 mpower requirement:90,0 + 36,5 kWweight:110 tGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic

pressure:800 tdistance between columns:3010 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:1350 mmtable surface area:3000 x 1800 mmtable height over floor:500 mmside window:1500 x 1400 mmram surface:3000 x 1800 mmspeed down:300 mm/soil volume:900 lheight over floor:5,4 mheight beneath floor:2,1 mpower requirement:200,0 kWweight:80,0 tDimensions (WxDxH):5,2 x 2,6 x 7,5 mram interlocking:in TDC depth stop:mechanical

pressure:2,5 t ... mais informação

nominal force:315 tstroke:300 mmno. of strokes:36 /mindistance between columns:540 mmdistance table/ram, max. stroke up, adjustment up:750 mmtable surface area:530 x 630 mmblow die to die:630 tAllowed max. force:500 tram surface:450 x 560 mmspindle diameter:180 mmpower capacity:18,0 kWweight:13,0 tDimensions (WxDxH):2,5 x 2,0 x 4,0 m