A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.

subcategorias
(terceiro nível de categoria)

mais 1076

 

Fabricante:
(Categoria: 106)

AB 1
ABM 1
BBT 1
BMW 1
EBU 24
EHT 23
ETP 1
FMS 3
HACO 17
HBM 1
HM 1
HSM 1
HSP 1
IHI 1
IMS 1
IWK 1
JKM 2
KRS 1
LAG 1
LBM 3
LUX 1
LVD 9
MAE 8
MFD 1
NB 4
NN 1
OMC 1
PIT 1
PMB 1
prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: CHEMNITZ mechanisch Hand-Operated Fly Press
Número do item: 164025688
Ano de construção: 1965
usava

pressure:20 tStroke:230 mmtable surface area:Ø600 mmdistance table - lower edge of ram:770 mmweight:595 kg ... mais informação

prensas / 双柱液压机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: MÜLLER ZE 630 / ZE 400 Double Column Press line
Número do item: 164024410
usava

Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manufacturer: ABB Type: IRB ...

prensas / 液压压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: BLISS PHD 1500 HYDRAULIC PRESS
Número do item: 164024411
Ano de construção: 2017
usava

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ram pin slots: 308 piec ...

prensas / 机械压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: SCHULER E4-600-3.35-762 Press
Número do item: 164024412
Ano de construção: 1975
usava

Description: Serial Number: 74-20-0293 Width between uprights:  ,3700 mm , Table surface: 3350x2134 nn Punch stroke: 762 mm , Distance between plate: 1322 Strokes per minute: 16/min Table openings: 3 Main motor: 90 kw 1500rpm Punch Motor: 7.5kw 1500 rpm , Lubrication equipment: 0.75kw 1500 rpm , Pump motor power: 1.1 kw 3000rpm , Voltage: 220V, 50 hz Pneumatic installation: , Surface area: 1420x990 mm , Piston diameter: 800 mm , Stroke of plunger 305 mmm , Total power: 180Mp  ,Approx. Onsite Dimension. (l x w x h): 4,000 x 6,000 x 12,000 mm, weight approx.: 180,000 kg

prensas / 弯曲压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: ADIRA PA016030 CE Press Brake
Número do item: 164024413
Ano de construção: 2021
usava

Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Gauge: Z1/Z2 Front Support Arms: 2 arm ...

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: DIEFFENBACHER PO 1000 A (UVV) Hydraulic Double-Column (Drawing) Press
Número do item: 164025949
Ano de construção: 1979
usava

pressure:1000 tdistance between columns:3030 mmstroke:350 mmDistance table/ram, max. stroke up, adjustment up:1400 mmtable surface area:3000 x 2000 mmtable height over floor:430 mmside window:1450 x 1400 mmram surface:3000 x 2000 mmspeed down:300 mm/sspeed up:340 mm/sworking speed:18 - 44 mm/sreturn capacity:120 toil volume:4400 lwidth with platform:4950 mmpower capacity:2 x 90,0 + 10,0 kWweight:87,0 tDimensions (WxDxH):4,35 x 3,65 x 7,55 mheight over floor:6,05 mheight beneath floor:1,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

prensas / 弯曲压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: ERMAKSAN Speed-Bend 6100x400 CNCPress Brake
Número do item: 164024414
Ano de construção: 2018
usava

Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 ,  ,V12 3215 ,  ,V24 3234 ,  ,V50 3223 ,  ,V100 3040 ,  ,V12 ,  ,26 gr. ,  ,  ,R3 Hemming die BMR 55.16.30 ,  ,  ,  ,  ,  , V16 30 gr. Top tool: 1310 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 85 gr. ,  ,  ,R0.8 H115 1030 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 88 gr. ,  ,  ,R0.8 H145 TOP.175.26. ,  ,  ,  , 26 gr. ,  ,  ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...

prensas / 弯曲压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: ILMA  Press Brake
Número do item: 164024415
usava

Description: working length: 2500 mm max. pressing force: 80 t manually adjusts the limiter possibility of adjusting the left and right sides by height no documentation  , please also have a look at the video of this machine Max. pressing force: 80 to, bending length: 2,500 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,600 x 1,650 mm

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: DUNKES HDZ 200/80 (UVV) Hydraulic Double-Column (Drawing) Press
Número do item: 164025951
Ano de construção: 1982
usava

pressure:200 tdistance between columns:1650 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1600 x 1250 mmdie cushion capacity:80 tdie cushion stroke:300 mmdie cushion area:1300 x 900 mmtable height over floor:800 mmram surface:1600 x 1250 mmoil volume:ca. 2000 lpower capacity:43,0 kWweight:25,0 tDimensions (WxDxH):2,9 x 2,3 x 5,8 mheight beneath floor:0,85 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

prensas / 偏心压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: SCHULER PD 63T Eccentric Press
Número do item: 164024416
usava

Description: press power: 63 t table dimensions L×W: 700x550 mm table opening LxW: 265X265 mm presser LxW: 320x300 mm presser stroke: 130 mm (fixed) max distance of the presser from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 pneumatic components: FESTO commands: single (foot-shoe, two-handed-lever), continuous (automatic mode-setting time interval 1-99999s and number of repetitions 1-32000) a special function for determining the lower position of the presser automatic lubrication of the machine pneumatic triggering and braking Max. pressing force: 63 to, stroke: 130 mm, table surface area l x w : 700x550 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,500 mm

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: LAUFFER RAU 320 (UVV) Hydraulic Double-Column (Drawing) Press
Número do item: 164025952
Ano de construção: 1982
usava

pressure:350 tdistance between columns:1350 mmstroke:900 mmdistance table/ram, max. stroke up, adjustment up:1300 mmtable surface area:1300 x 1000 mmpressure of drawing cushion in table:100 tstroke of drawing cushion in table:380 mmdie cushion area:350 x 285 mmcapacity of ejector in ram:25 tejector stroke in ram:200 mmtable height over floor:750 mmram surface:1300 x 1000 mmspeed down:500 mm/sspeed up:160 - 470 mm/sworking speed:16 - 44 mm/sdrawing speed:57 - 160 mm/sreturn capacity:32 toil volume:1700 lpower requirement:91,0 kWDimensions (WxDxH):3,75 x 2,8 x 7,2 mheight over floor:5,28 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: AWS SCHÄFER HFC 120 Hydroforming Press
Número do item: 164024417
Ano de construção: 2003
usava

Description: Technical data Locking force 120,000 kN Preforming force 2,400 kN Retraction force 2,000 kN Max. Mold weight upper part 30,000 kg Plunger stroke 1250 mm Closing speed (theoretical 450 mm/s)400 mm/s Max. Pressing speed 150 mm/s Return speed (theoretical 450 mm/s) 400 mm/s Positioning accuracy ± 0.1 mm Measuring resolution 0.01 mm Pressure regulating systems for gun pre-tensioning Number of independent systems 2 sets (1 x top, 1 x bottom) Max. Pressure 25 MPa Max. Return flow rate 2 x 900 l/min Accuracy of pressure regulation ± 0.5 MPa Pump - Motor Pump capacity 3 x 360 l/min Max. Working pressure 30 MPa Electric motors (3 x 160) 480 kW Electric motor cooling/filter circuit22 kW Speed1450 rpm (50 Hz) Pressure accumulator system Min. - Max. Working pressure 27 - 30 MPa Volume piston accumulator (6 x 50) 300 liters Oil tank volume 4000 liters Dimensionen Werkzeugeinbau ...

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: BURGER DO 3 Pneumatic Press
Número do item: 164025953
usava

pressure at min. stroke:3 tthroat:150 mmstroke:- 39 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 380 mmpressure at min. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:790 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,2 tDimensions (WxDxH):0,5 x 0,9 x 1,4 m

prensas / 液压压力机
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: CIP?IPARI SZÖVETKEZE  Hydraulic press
Número do item: 164024418
Ano de construção: 1985
usava
Preço: máquinas usadas leilão RESALE 250 €

Description: Electric connection: 380VApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 1,000 kg ... mais informação

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: BURGER DO 3 Pneumatic Press
Número do item: 164025954
usava

pressure at min. stroke:3 tthroat:150 mmstroke:- 40 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 250 mmpressure at max. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:810 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,15 tDimensions (WxDxH):0,7 x 0,8 x 1,4 m

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: HBM P 10 Workshop press - hydraulic
Número do item: 164024419
usava
Preço: máquinas usadas leilão RESALE 380 €

Description: Frame press, CE certified according to the latest guidelines. - with manual hydraulics - Move the cylinder sideways - 2 pcs. Pressing block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. Pressing bolt, 10 - 30mm, with quick-change adapter, max. 20t - 2 press documents Pressure 10 t Stroke 180 mm Clear width between stands 335 x 115mm Installation height max. 340 mm Cylinder diameter 56mm Piston diameter 40mm Machine weight approx. 0.05 t Space required approx. 0.75 x 0.53 x 1.6 mApprox. Onsite Dimension. (l x w x h): 800 x 550 x 200 mm, weight approx.: 50 kg

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: WEINGARTEN N 63 Eccentric Press - Single Column
Número do item: 164025955
Ano de construção: 1970
usava

Pressure:063 tthroat:250 mmstroke:8 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:700 x 500 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:320 mmram surface:450 x 280 mmram adjustment:63 mmweight:4,5 tDimensions (WxDxH):1,6 x 2,0 x 2,8 moverload protection in ram:mechanical

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: BERG & SCHMID HK 800 Knee lever press
Número do item: 164024420
usava
Preço: máquinas usadas leilão RESALE 390 €

Description: Knee lever press • Working height adjustable by simply loosening the clamping screws on the stand • Fine adjustment of working height with HK 800 = adjustment of the Press head to the desired working height. The fine adjustment takes place compulsorily in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm 90 mm projection Working height of up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mmApprox. Onsite Dimension. (l x w x h): 160 x 230 x 410 mm, weight approx.: 22 kg

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: MUELLER  Rack and pinion press
Número do item: 164024421
usava
Preço: máquinas usadas leilão RESALE 120 €

Description: Rack and pinion press on stainless steel trolley Stroke 260mm Table 400 x 230mm Projection 150mm see picturesApprox. Onsite Dimension. (l x w x h): 650 x 500 x 1,200 mm, weight approx.: 70 kg ... mais informação

prensas
Data de publicação: 09.05.2024 adicionar à lista de observados
Máquina: BERG & SCHMID HK 1700 Knee lever press
Número do item: 164024422
usava
Preço: máquinas usadas leilão RESALE 449 €

Description: Knee lever hand presses HK 1700 stroke 60 mm with crank with fine adjustment of working height Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column Pressure 17.0 kN Stroke 60mm projection 105 mm Working height of up to 75 -180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x 415 mmApprox. Onsite Dimension. (l x w x h): 260 x 130 x 415 mm, weight approx.: 35 kg