prensas usadas para venda

Machine Type: Press Brake Manufacturer: HACO Type: ERM36250 Year of construction: 2011 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-1 DESCRIPTION We offer you a used press brake from the manufacturer HACO. Press force 250t Bending length 3600mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons

Number of axes 5 Pressing force kN 1000 Working length mm 2600 stroke mm 200 Operation mm/s 10 Delivery speed mm/s 200 Return speed mm/s 200 Main engine power kW 11.4 Control BC 55 Graphics Safety Fiessler Light Barriers Accessories Various press brake tools Operational documentation

No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,  ... mais informação

Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m 2m 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.

Ref.Nr. Schmidt-INN Press Manufacturer: Schmidt Technology GmbH Type: 29-50-2K Compressive force: 22 KN Safety distance: 170mm min/max. operating pressure 3/6 bar Stroke: 50mm Delay time: 0.055sec Weight 120 kg Facility is immediately available (without tools)  ... mais informação

ype HD250-1500 Stroke of the piston 400mm Max distance between piston and table 1000mm Working width between the uprights 1500mm Width of the frame 600mm Movable Cylinder Yes Engine power 11 Kw Dimensions L x W x H 2000 x 1100 x 2550mm Weight 1950 kg  ... mais informação

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 6000 kg

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T  ... mais informação

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight:  ...

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Press force at the end of stroke: 2000 t Slide stroke: 200 mm Number of slide strokes per minute: 17 Adjustment of interstamping space: 15 mm Max. distance between table and slide in its lower position: 830 mm Distance between guides in daylight: 1040 mm Bolster plate dimensions: -From front - to back: 1300 mm -From right - to left: 1270 mm Size of the opening in the table - diameter: 130 mm Slide dimensions: -From front - to back: 800 mm -From right - to left: 1250 mm Main electric motor: -Type: АС 82-4 -Power: 55 kW -RPM: 1380 Electric motor of adjustment: -Type: АО 52-6 -Power: 4,5 kW -RPM: 950 Press weight: 75107 kg

capacity 315 ton., table 1250x2500mm., stroke 400mm., shut height 750mm., number of strokes per min. 25, weight 50,9ton.  ... mais informação

Nominal pressing force ... 400t Table dimensions... 3100x1500mm Plunger Dimensions ... 3290x1200mm Max. ram stroke ... 460mm Number of strokes ... 10-25/min Control Fagor ... CNC 8055 M Machine weight ... 115000kg The machine is in good condition, possible to test under electricity. ... mais informação

Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power. ... mais informação

Hydraulic press ZHO700N Manufacturer: Presshydraulika Year: 2015 Nominal pressing force ... 700t Clamping table surface ... 2500x1500mm Plunger stroke ... 500mm Installation height ... 1200mm Pestle dimensions ... 2400x1000mm Distance between stand ... 2500mm Control Siemens Force of the lower ejection ... 234t Stroke of the lower ejection ... 200mm Machine weight ... 52000kg L x W x H ... 5150x2870x4710mm The machine is in good condition, possible to test under power.

C - Column press make : Schleifenbaum and Steinmetz Printing capacity : 200 tons Table dimensions : 1200 x 1000 mm With 2 hand controls. Installation height : Cylinder stroke : machine was originally designed by the manufacturer as a carp press designed for curved discs. It was used by us as an auxiliary press for punching boiler bottoms. machine cannot be built on the ground without an independent foundation. Hall floor. Total weight : 12 tons.