máquinas de bebidas usadas para venda

Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...

Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg

Overview The palletizer was built in 2007 by Slowenian manufacturer I.H.S. The machine is in a very good condition and can be visited. Techn. Details Last used for palletizing: PET Bottles – Film only Capacity: up-to 300 layers/hour Intermediate layer insert For loading of various types of packed products High flexibility: suitable for a large scope of products (mostly used for wrap-around cases and shrink-wrapped packs) Robust construction suitable for high loads and capacities Possibility of high or low infeed

Overview The BP 1800 briquette press was manufactured in 2003 by the German company Strautmann. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The briquette press is still assembled and electrically connected. Technical data   Filling opening: 950 x 1300 mm Size: 5595 x 1570 x 2000 mm  Installation area: approx. 5.8 m² without ejection chute Briquetting of  Cardboard  Paper  Styrofoam PET bottles Briquette dimensions: 200 x 200 x 100-300 mm  Briquette weight: approx. 200 to 450 kg/ m³, depending on material  Accessories Conveyor belt Distribution chute

We offer for sale a coffee roasting machine. Manufacturer PROBAT PROBATONE Type L12 E, heated by electro for roasting in batches of max. 12 kg. The machine was fully serviced. New bearings, newly lubricated with high-temperature petroleum jelly. The machine is equipped with new improved heating coils. Year of manufacture 2007. Installed input power 21 kW, 3 x 400V, fuse 32A. The machine is very reliable and fully functional. We can demonstrate the machine in operation.

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Used Shrink Wrapper Novopack 15 cps [...for more information send your inquiry to the seller.] refno: FA01 ... mais informação

Used blow molding Sidel SBO 12 Series 2 The Sidel SBO 12 Series 2 represents a culmination of this evolution boasting advanced features and capabilities Over time blow molding machines have become indispensable in modern manufacturing Reliable Performance and Durability of the Used blow molding Sidel SBO 12 Series 2 Moreover the blow molding machine stands out for its exceptional performance and durability With a modest operational lifespan of 45 000 hours it has proven to be a reliable workhorse in the production line Its robust construction and precise engineering ensure consistent quality and productivity making it a valuable asset for manufacturing operations Comprehensive Maintenance Support In addition maintenance and servicing are crucial aspects of ensuring the longevity and performance of blow molding machines Sidel a leading manufacturer in the industry offers comprehensive sup ...

Overview This canning machine CB50F from American Manufacturer, Pneumatic Scale Angelus was built in 2020. It has been well maintained with regular servicing and is in immaculate condition. It has been recently upgraded with Teflon hoses to the fill heads. Tech. Details Capacity - 3000 cans per hour. Can formats 330ml 440ml 500ml 560ml Can end spec - 202 CDL Dimensions (Floor) - 3121mm x 946mm Added bonus of UK and Europe wide engineering support (cost at buyer expense)

Overview The blow moulder was built in 2011 by French manufacturer SIDEL. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details        Working hours: 37.289 h Capacity Max. 32.000 bph Recently produced at 25.600 bph at 2.0L Number of moulds: 16 hot or cold molds Molds: Hot molds up to 75°C, or standard Equipped with quick change Oven type: Sidel Universal Eco2 C3 special filters Number of heating modules: 20 modules Neck personalization: 38 mm Machine was regularily maintained                           Machine equipped with:                     Sidel preforms tipper Sidel preforms hopper & feeder AGR preforms disinfection Sidel Predis Ultra Clean Vulcanic water/oil thermoregulator Sidel electrical cabinet Sidel control panel Sidel PCC

Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Sp ...

Overview The mobile bakery nr. 154 was manufactured in 1968 by the Swiss manufaturer Draize SA Neuchatel. It was used by the Swiss military and is now owned by a bakery in Germany, where it is not used anymore. Technical description Trailer 10 t Both axles steered Road registration with green number Has been used by the Swiss military (run three times, otherwise only maintained) Fully equipped with awning, running grid, entire inventory (box bread molds included) Everything from the bakers apron to the scales is included New original kneader A complete workshop on board with many spare parts Own power supply Water system with self-sufficient hot water production Large proofer The 10 sqm oven would be upgraded with stone stoves (new) This means that everything can be baked, bread, rolls, cakes and baked pork Firing, basically everything Oil burners or diesel, wood or wood briquettes Its ...

Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) ...

Overview This 5 HL brewing equipment was built in 2022 by Polish manufacturer Minibrowary. It was only installed and dismantled in the same month. Equipment Brew kettle/mash tun Vertical tank working capacity of 5 hl, mounted on three supports welded to the cylindrical part supports have adjustable feet with a height adjustment of up to 60 mm, allowing for the leveling of the tank. cylindrical tank is entirely made of stainless steel The brew kettle also serves as a mash tun. The purpose of mashing is to dissolve soluble compounds of malt in water and enzymatically break down starch, proteins, and other compounds. Vessel is equipped with a steam heating system, stirrer, and sensor. The mashing temperature is appropriately regulated. It is possible to carry out mashing using infusion and decoction methods. Equipment of the Tank Two-level stirrer Gearmotor 60 rpm with variable speed contro ...

Overview The bottling line was manufactured in 2007 by Italian Company Bardi. It fills still water into gallons and folds them onto pallets with an ABB roboter. Components Washing and Filling of Gallons | R. Bardi S.R.L | Junior 300 | 2007 Output: 300 bph (at 5l bottles)   Electric power installed: 80 kW 120A Manual decapper Washing phase Filling phase Capping phase Folding of gallons in the pallets | ABB The robot cell is designed to fold the gallons, coming from the filling machine, in specific pallets, which are two hights.

Overview The solo screw capper was manufactured from Adelski in 2000. As it is not needed any longer in the filling line it is for sale. The machine has one screw capping head . The cap sorting system belongs to the scope of supply. The machine was dismantled recently and is in technically good condition. A change over to a BVS 30 x 60 can be offered on request, same as PP caps. Tech Specs: Capacity: up to 2,500 bph Number of capping places: 1 Working direction: counter clockwise Control: Siemens S7 Processable caps: MCA 28 x 15 and 28 x 44 Accessories: Screw cap sorting system

Used Shrink Wrapper OCME VEGA S 60 2 F [...for more information send your inquiry to the seller.] refno: FA21 ... mais informação

Used Bottle Labeler Krones Starmodul 12000 bph year 2003 Builder Krones Model Starmodul 960 16 K405004 Year of construction 2003 Hourly production bottles per hour 12000 BPH Direction of rotation Counterclockwise Size type 1 l glass Product Oil Number of targets 16 Number of stations 2 1 cold glue module 1 adhesive module could still accommodate 1 Type of labeling self adhesive cold glue Number of labels 2 165 110 paper Manuals available Yes Machinery still in operation No stopped since December 2016 Photo OK Availability immediate [...for more information send your inquiry to the seller.] refno: ET73

Used Isobaric Filling Machine Berchi ISOFILL 80 20000 bph PLC Siemens S7 300 [...for more information send your inquiry to the seller.] refno: R30 ... mais informação

Used Bottle Labeler Krones Bonamatic 12000 bph year 2001 Builder Krones Model Bonamatic Year of construction 2001 Hourly production bottles per hour 12000 BPH Direction of rotation Clockwise Size type 4 different sizes Number of stations 2 Type of labeling cold glue Number of labels 2 front back Label control system Inspector Krones Checkmat type 707 for label and capsule [...for more information send your inquiry to the seller.] refno: ET69