used DECKEL for sale

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Lid milling machine FP4MA-2204 Year of construction: 1987 Serial no.: 20965 Controls: Contour 2 Condition: fully functional

3-axis machining center X: 560 mm Y: 500 mm Z: 390 mm Rapid traverse rate: 4 m / min Table load: 800 kg Speed range: 4000 RPM Spindle retainer: SK 40 Headstock speed range: 4000 RPM Spindle drive: 4 kW Control: Dialog 11 Electr. Handwheel Coolant system direct measuring system Documentation Total power: 19 kW Machine weight: approx. 2.8 kg Dimensions (W x D x H): 3.66 x 3.5 x 2.1 m

Techn Data: Clamping range, Tips height of the part head, without /with swivel plate 65/95mm Largest cutter pass-through between the peaks 130mm Largest distance between the tips 250mm Largest cutter diameter at flying clamping 320mm Inner cone partial scopic spindle standard cone 40 or Morse 4 Largest bore of collet pliers 25mm Motion Longitudinal movement of the partial slide 260mm Cross-movement of the cross-loop guide Coarse 200mm Cross-movement of the cross-sled geese Fine 50mm Height adjustment of the vertical slide 50mm Swivelability of the table slide 360° Swivelcapability of the vertical slide guide 360° Swivel lingability of the swivel bearing around axis persethering to the partial spindle 220° Swivelability of the partial head slide guide around axis parallel to the partial spindle 30° Largest grinding length for spiral grinding 100mm Smallest and larg ...

Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg

NC milling machine, 3 axis, brand cover, type FP 5NC, YOC 1986 Documents are available. The price is net. Without vice and rotary jaw chuck

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Manufacturer: Lid Type: FP 5 CC Year of construction: approx. 1986 Table: 1500 x 675 mm Longitudinal path: (X,Y,Z axis) 1200x600x500mm Tool changer: no Tool holder: SK 40 Vertical spindle speeds: 20-6300rpm Feeds: 2-5000mm/min Connection: 50 Hz 3x 380V Spindle motor: 7.5KW Machine weight: approx. 8200kg Dimensions: 3300x2400x2400mm

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!

Deckel S11 Tool grinding with lots of accessories

Machine Type: Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Active 3-Axis Year of construction: 1989 Condition: very good Offer Type: Used Machine Specifications: Table: 600 x 210 mm Speed range: 40 – 2000 rpm. Spindle mount: SK 40 Travel range: x = 300 mm y = 160 mm z = 340 mm Propulsion: 1.6/2.0 kW Remark: Heidenhain TNC 113 3-axis active digital display, Infinitely variable feed and rapid traverse in x, y, z coolant device, Central lubrication machine light, 5 SK40 tool holders, Collet holder with 10 collets 2 – 20 mm Weight: 800 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg

Condition: used very good, ready for immediate use Specifications: – Control: DIALOG 4 – Travel approx.: X: 300 mm, Y: 300 mm, Z: 400 mm – Table dimensions approx.: 620 x 390 mm – Tool holder: SK 40 – Weight approx. 1,600 kg – Transport mass approx.: L: 1.90 m, W: 1.50, H: 1.90 m -Accessories, documentation, vice and approx. 20 A SK40 mounts

Used Adjustable Angle Table suitable for lid FP 2 Table size approx. 690 x 280 mm Weight approx. 50 - 60 kg Location: 589425 Unna The machine is welcome to be visited. A forklift for loading is available. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are u ...

Speed range pre-milling spindle 60 - 1000 rpm Speed range finishing spindle with V-belt 350 - 10000 rpm TOOL CARRIAGE Distance between milling cutter and stylus 450 / 350 mm Vertical movement 50 mm Movement lengths 300 mm Movement transverse 180 mm FIXED WORK TABLE 250 x 700 mm large distance to spindle nose 475 mm Movement lengthwise and transversely 300 x 200 mm max. workpiece weight 600 kg Drive power 0.9 / 1.1 kW Dimensions approx. L x W x H 1350 x 1600 x 1950 mm Weight approx. 1.5 t used, in good condition

Machine is in TOP condition ! X/Y/Z: 400/220/400 mm Speed: 40 - 2500 rpm Feed: 0 - 500 mm/min Rapid traverse: 1200 mm/min Quill stroke: 80 mm Table: 700 x 320 mm Tool holder: ISO 40 Drive motor: 2.2 kW Machine dimensions (WxDxH) 120 x 150 x 175 cm Dimensions electrical box (WxDxH) 64 x 32 x 90 cm Machine weight 1200 kg Weight control cabinet 80 kg

Machine type: Tool milling machine Manufacturer: DECKEL Model: FP 1 Active 3-Axis Year of construction: 1984 Condition: very good Type of offer: used machine Specifications: Table: 600 x 210 mm Speed range: 40 - 2000 rpm. Spindle mount: SK 40 Travel range: x = 300 mm y = 160 mm z = 340 mm Propulsion: 1.6 / 2.0 kW Remark: Heidenhain TNC 113, 3-axis active digital display, Safety cabin with electrical shut-off, coolant device, Machine vice with turntable 110 mm jaw width, Collet chuck SK 40 with 13 collets 5 - 25 mm, 5 tool holders SK 40, infinitely variable feed control and rapid traverse in x, y, z Weight: 850 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

Universal – Milling Machine Make: Deckel Type: FP 4 A Year of construction: 1985 Controls: Contour 1 Travel: x-485 mm y-385 mm z-380 mm Quill stroke: 80 mm Main drive: 3.7 / 4.4 kW Speeds: 18 steps 50 -2500 rpm Mounting: SK 40 Feed rate: 10 – 1000 mm/min Rapid traverse: 2000 mm/min Table size: 800 x 460 mm Weight: approx. 1800 kg

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

Year of construction 2001 Siemens 810D Operating hours 1988 Travel 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Rinse gun Universal swivel rotary table 400 x 280 mm, 360° rotation range, +105/-15° swivel range with electronic angle display Coolant system

Machine Details Stock-No. 1105-03873 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 1985 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex Warehouse Technical details X-Travel 300 mm Y-Travel 150 mm Z-Travel 340 mm tool taper SK 40 spindle turning speed range 40 - 2000 rpm Feeds 10 - 500 mm/min table-size 600 x 210 mm engine output 1,5 / 1,8 kW Weight of the machine approx. 700 kg dimensions of the machine approx. 1.6 x 1.2x 1.6 m Additional information NICE MACHINE WITH UNIVERSAL TABLE

- X: 300 mm - Y: 160 mm - Z: 340 mm - Speed range: 40 - 2000 rpm - Clamping surface: 600 x 210 mm - Spindle mount: SK 40 - Control: TNC 113 digital display - Total power: 1.5 / 1.9 kW - Machine weight: 1050 kg - Space requirements (W x D x H): 1.2 x 1.0 x 1.9 m - Condition: good Details rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head can be moved to spindle block 100 mm Accessories Machine feet, documentation, counter holder, no other accessories

; very good

Dialog 11 Control Speed range 40 - 4000 rpm Rapid traverse 4 m/ min Tool holder SK 40 Feed rate 2 - 3600 mm /min, infinitely variable Connected load approx. 10 kVA Travel X/Y/Z 300 / 300 /400 mm Working spindle vertically and horizontally Extendable quill 80 mm Milling head swivel +/- 90° Accessories: coolant device, electr. Handwheel Cabin with protective device ( When opening of the cabin door stops the milling spindle ). Very good original condition! The axes and milling spindle run quietly and precisely. Geometry in X/Y/Z axis 0.015/0.01/0.015 mm Spindle concentricity to 300 mm/0.012 mm Price: 8500,- EUR excl. VAT free loaded from warehouse Tirschenreuth

Deckel FP3 A Milling Machine Dialog 11 Year of construction 1990, Dialog 11 control, working range 400 x 400 x 450 mm, quill stroke 80 mm, spindle speeds 4000 min, tool holder SK 40, feed rate 2 - 6000 mm/min, working range 400 x 405 x 400 mm, angle table, weight approx. 2000 kg, dimensions without control panel 1700 x 2100 x 2000 mm. Accessories: Universal tilt and swivel table Electronic handwheel, Coolant equipment Manuals Very good technical condition. Unfortunately, the machine was poorly painted over. A viewing under power is possible by appointment. If you have any questions, please feel free to contact us by phone at any time! You can find information on this under Legal information of the seller. Thank you very much.

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

Spindle speed 4000 RPM Dialog 11 control Toolholder SK 40 Feed power consumption approx. 10 kVA Weight approx. 1400 kg traverse path X / Y / Z 307 / 303 / 400 mm Accessories: dividing attachment, coolant system, Electr. Handwheel

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

Year of construction 1998 Heidenhain Siemens 810D 14900 Operating hours 24 fold tool changer Working area 630 x 500 x 500 mm Feed 1-10000 mm /min Rapid traverse 30000 m/min Tool holder ISO 40, spindle speed 1 - 8000 rpm Medium cooling device approx . 4200kgAccessories Accessories: Cooling device, el. Handwheel The machine has been revised and is in very good condition. All axes are free of backlash, run quietly and precisely. Milling spindle overhauled 2019, 0 operating hours (approx. 5.000,- Euro)

- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head

BRAND: DECKEL YEAR: 1989 MODEL: FP4AT APPLICATION TYPE: MILLING LOCATION: AUSTRIA MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 2895 KG CONTROL UNIT BRAND: DECKEL MODEL: CONTOUR 3 MAIN DRIVE SPINDLE SPEED RANGE: 4000 1/MIN MOVEMENT X-AXIS MOVEMENT: 560 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 450 MM TABLE OUTER LENGTH: 900 MM OUTER WIDTH: 530 MM TOOLS SLOTS IN STORAGE: 20 TYPE OF TOOL HOLDER: SK 40

BRAND: DECKEL YEAR: 1996 MODEL: DMC 100V APPLICATION TYPE: MILLING LOCATION: DENMARK MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: DECKEL MAHO MODEL: DIALOG 112 MAIN DRIVE NUMBER OF AXIS: 3 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MACHINE COMES WITH ONE ADDITIONAL SPINDLE, NEVER USED

Lid S1 Tool Grinding Machine

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal dimensions of work bowl X/Y/Z: 845mm/635mm/340mm, max. filling height:: 300mm, max. workpiece height: 260mm. Documentation available. On-site inspection is possible.

X-travel: 710mm, y-travel: 600mm, z-travel: 500mm, rapid traverse: 6000mm/min, max. rotational speed: 6300/min, tool holder: SK 40, table dimensions: 550x1000mm, NC rotary table diameter: 630mm, controls: Dialog 4.

Controls: DECKEL DIALOG 11.

X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, feed rate: 2-3600/min, rapid traverse: 4000mm/min, including documentation, without spare parts, gear for speed under 500/min is defective and the milling spindle is losing oil.

Rotational speed: 0-3150/min, weight: 3.38t.

X-travel: 560mm, y-travel: 500mm, z-travel: 390mm, table dimensions: 900x530mm, rotational speed: 4000/min, tool changer: SK 40, controls: DECKEL DIALOG 11, with documentation, the tool changer is defective and needs overhauling.

CONTROLS   CNC controls DECKEL DIALOG 4 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 400 mm   Y-axis travel: 320 mm   Z-axis travel: 400 mm TABLE   table surface (left-right): 700 mm   table surface (front-back): 460 mm   workpiece load (max): 350 kg SPINDLE / HEAD   spindle revolutions (min): 63 /min   spindle revolutions (max): 6300 /min AXIS DRIVES   feed velocity (min): 2 mm/min   feed velocity (max): 3600 mm/min   rapid traverse: 4000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3200 mm   space requirements -front/back-: 3200 mm   total weight approx.: 2000 kg

This Deckel FP 3NC Milling machine was manufactured in the year 1988 in Germany. It is equipped with a DECKEL DIALOG 4 control unit. The machine has a spindle speed of 6300 rpm.

This DECKEL FP4 60 Milling machine was manufactured in the year 1994 in Germany.

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used