used DECKEL for sale

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...

x-travel: 290/300 mm y-travel: 160 mm z-travel: 330/340 mm engine output: 1,5/1,9 kW weight of the machine ca.: 0,7 t Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green Compliance with the Machinery Directive on request at extra cost (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acce ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW The machine can be viewed under current.: operating key and instruction: DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 2178 / 02 380 V, 50 Hz, with CEE plug and cable Original paint ! ! Machine is in delivery condition, depending on customer request the machine can be overhauled ! motorised height adjustment, axial grinding spindle adjustment Accessories: Dividing head Sk 40 with dividing disc 24 R with mounting points for optics Dust extraction device without suction cup Halogen lamp Protective cover 3 pcs. transport lugs 1 set of technical sanding instructions Operating key, operating instructions, spare parts list, wiring diagram The ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW The machine can be viewed under current.: operating key and instruction: DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 465 / 84 380 V, 50 Hz Colour: green ! Original paint ! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: Dividing head Sk 40 with dividing disc 24 R with mounting points for optics Dust extraction device without suction cup Protective cover 3 pcs. transport lugs 1 set of technical sanding instructions Operating key, operating instructions, spare parts list, wiring diagram The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Siemens ergoline table surface area: 2x 790 x 560 mm number of pallets: 2 rapid traverse: 30 m/min turning speed range: 8000 U/min power capacity - milling spindle: 13 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight: 5,2 t dimensions: 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm control: Dialog 11 turning speed range - main spindle: 31,5-5.000 U/min power capacity - main spindel: 7,5 kW tool taper: SK 40 table surface area: Ø 500 mm Tool-Presetter:: 30 Stück feeds:: rapid travel ( X / Y / Z ): 6 m / min. m/min weight of the machine ca.: 4,3 t dimensions of the machine ca.: 3,5 x 2,4 x 2,2 L/B/H m Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 220 mm z-travel: 400 mm spindle taper: ISO 40 spindle turning speed range: 25 - 2500 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 700 x 330 mm Taper: diverse Bellows with slats of aluminium: Protection cabin: bottom tray: Machinefeets: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: - kW tool adaptor: 88 length: 560 mm center height of top slides: 65 mm weight: 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm spindle taper: ISO 40 spindle turning speed range: 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 1,6/2 kW weight of the machine ca.: 570 kg dimensions of the machine ca.: 1,2 x 1 x 1,75 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 600 x 210 mm Taper: Opposite bearing for horizontal milling unit: Bellows with slats of aluminium: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software ...

with digital read-out: Activ make: HEIDENHAIN for axes: 3 x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm horizontal milling head:: tool taper: ISO 40 vertical head:: tool taper: ISO 40 vertical movement of the milling spindle: 90 mm spindle turning speed range: 50-2500 U/min number: 18 feed stepless: 6.3-630 mm/min rapid motion -longitudinal/cross/vertical: 1.3 m/min total power requirement: 3.7/4.4 kW dimensions of the machine ca.: 1.3x2.0x2.0 m weight of the machine ca.: 1.8 t fixed working table:surface area: 800x460 mm vice: jaw width: 125 mm collet chuck: 1 number of collets: 11 boring chuck: 1 milling arbors: 7 coolant: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 0.7 t Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 800 mm table width: 400 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1170 mm y-travel: 500 mm z-travel: 370 mm table load: 2 t spindle turning speed range: 25 - 2500 U/min feeds: 4 - 2000 mm/min rapid traverse:: 4000 mm/min taper ISO: 40 total power requirement: 12,5 KVA weight of the machine ca.: 4 t dimensions of the machine ca.: 2,3 x 1,9 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm control: Grundig Contour tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm table surface area: 900x520 mm turning speeds: 4000 U/min tool taper: SK 40 Control: Heidenhain type: TNC 355 : elec. coolant: total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm spindle stroke: 100 mm turning speeds: 40-2000 U/min Table area: 380x800 mm Feed: 10-500 mm/min Feed: 10-500 mm/min Rapid movement: 1500 mm/min spindle taper: ISO: 40 digital readout: Elesta total power requirement: 3 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,2x1,2x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper ISO: 40 x-travel: 710 mm y-travel: 600 mm z-travel: 445 mm Control: Heidenhain type: TNC355 mm table surface area: 1000x550 mm turning speeds: 6300 U/min quill stroke: 80 mm Feed: 1-3600 mm/min rapid traverse: 6 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: 840 D powerline spindle turning speed range: 20-12000 U/min spindle capacity: 28/19 kW tool taper: SK 40 NC rotary table: 900 x 700 mm max. table load: 1400 kg feed speeds x/y/z: 20-10000 mm/min rapid travel x/y/z: 60 mm/min weight of the machine ca.: 14800 kg total power requirement: 60 kW dimensions of the machine ca.: 6,9 x 6,8 x 3,0 m Equipment/ accessories: - 5 - axes simultaneous/ Programming software ShopMill 840 D - Universal milling head with controlled B-axis - Tool changer 60-fold - Infrared measuring probe Heidenhaun TS 641 - Coolant unit 600 l IKZ 40 bar Air blast through the spindle center via M - function - Electronic handwheel - Chip conveyor - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm control: Dialog 11 turning speed range: 20 - 5000 U/min tool taper: SK 40 table surface area: 900 x 520 mm feed stepless: 2 - 4000 mm total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,5 x 3,2 x 2,5 m Control: GRUNDIG CONTOUR 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 400 mm z-travel: 450 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axis digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 700 mm Querweg Y / Y-travel cross 400 mm Senkrechtweg Z / Z-travel vertical 450 mm Tischgröße / table size 1000x470 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 31,5-1600 UpM /rpm Vorschubbereich X und Y-Achse / feed range X and Y axis 10-500 mm/min. Vorschubbereich Z-Achse / infeed Z-axis 5-250 mm/min Antriebsleistung/ power capacity 5 kW Gewicht der Maschine / weight 2400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was cre ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axis digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 500 mm Querweg Y / Y-travel cross 400 mm Senkrechtweg Z / Z-travel vertical 400 mm Tischgröße / table size 800x460 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-630 mm/min. Antriebsleistung Frässpindel / power capacity milling spindle 4,4 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 500 mm Querweg Y / Y-travel cross 400 mm Senkrechtweg Z / Z-travel vertical 400 mm Tischgröße / table size 800x460 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-630 mm/min. Antriebsleistung Frässpindel / power capacity milling spindle 4,4 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 m The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was cre ...

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was created wi ...

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 450 mm z-travel: 150 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 7,5 kW weight of the machine ca.: 5,5 t Working range: Longitudinal stroke X axis 600 mm Vertical stroke Y axis 500 mm Cross stroke Z axis 500 mm Clamping size of angle table 530 x 900 mm Max. weight of workpiece on table 450 kg Distance from table to vertical spindle, min./max. 120 / 620 mm Distance from table to horizontal spindle, min./max. 156 / 656 mm Tool taper SK 40 Spindle speeds 0 - 6,300 rpm Feeds X, Y and Z Axes, max. 2 - 10,000 mm/min Quick feed X, Y and Z Axes 10,000 mm/min Spindle drive 8 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 5,500 kg Accessories / Special Features DIALOG 11 CNC Control in 4 axes with all the usual options, cycles, and subprograms. Graphic display and electronic hand wheel. Vertical milling head can be pushed up manually so that the  ...

x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm Control: total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 3-axis-digital display ACU-RITE • 5 tool tapers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,44 x 1,8 x 2,05 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 600-210 mm Spindle diameter: mm Weight: 750 kg : 2000 um x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm : ja : : 2 Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm total power requirement: 56 kW weight of the machine ca.: 14300 kg dimensions of the machine ca.: 5500x300x3100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm turning speeds: 60 - 1900 / 9.5 - 1.200 U/min table:: 600 x 250 mm spindle taper: MK 4 // 20 x 2 feed range: ~ 10 - 500 mm/min total power requirement: 1.5 kW weight of the machine ca.: 750 kg range L-W-H: 1250 x 1200 x 1800 mm from a training workshop (BOSCH) maintained condition () Furnishing: - electro-motoric universal milling machine - conventional - easy to use - electro-motor feeds: X and Z axis - manual feed via handwheel: Y axis - robust work table with 5x T-slots - rotatable vertical milling head (SN 5287) - vertical & horizontal work spindle (without counterholder) - separate control cabinet - Coolant system with chip collection tray - Machine light (retrofitted) - EMERGENCY stop button (retrofitted) - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9131207 The data  ...

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm tool taper: SK40 Speed: 40-2000 U/min. control: Aktiv HEIDENHAIN TNC table-size: 600 x 210 mm total power requirement: 2 kW weight of the machine ca.: 0,73 t dimensions of the machine ca.: TBH 1200x1100x1600 m - very neat machine - Active feed in X, Y and Z axis - Cooling device - Central lubrication, electric - Vice RÖHM - Counter bearing for horizontal milling - some taper and clamping devices/mills - Work light - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Transversal way of the table: 260 mm Vertical adjustment of the table: 50 mm Vertical adjustment of grinding head: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Height: 1500 mm Various accessories: Set of collets Dividing attachment 3-jaw chuck diameter: 85 mm Spiral flute grinding attachment

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 300 mm Distance between centres: 380 mm Table length: 1100 mm Max. grinding diameter: 238 / 620 mm Max. grinding wheel diamter: 125 mm Longitudinal way of table Transversal way of the table: 220 mm Vertical adjustment of grinding head: 325 mm Slewing range of grinding head: horizontal: 360 ° vertical: 360 ° rotary axis of the grinding spindle head: 360 ° Grinding spindle speeds: number (steps): 2 from: 2000 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2 kW Machine´s weight about: 500 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1750 mm Various accessories: Set of collets Set of collets: ESX Lamp Tool cabinet Grinding wheel guard

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. milling cutter diameter: 0.5 mm Max. milling cutter diameter: 17.5 mm Max. radius to grind: 10 mm Collet drill: 17.5 mm Relief grinding angle max.: 45 ° Grinding wheel speeds fix: 4500 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 0.55 kW Machine´s weight about: 125 kg Overall dimensions machine: Length: 660 mm Width: 570 mm Height: 1400 mm

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 65 mm Distance between centres: 250 mm Table length: 470 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 70 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° Grinding spindle speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: DECKEL DIALOG 3 Technical data Table length: 632 mm Table width: 277 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Distance from vertical spindle to table: 93 - 525 mm Distance from spindle axis Spindle speeds: number (steps): 21 vertical from: 31.5 rpm up to: 3150 rpm Feeds: stepless longitudinal from: 2 mm/min up to: 2000 mm/min transversal from: 2 mm/min up to: 2000 mm/min vertical from: 2 mm/min up to: 2000 mm/min Rapid traverse:: 4 m/min Vertical quill travel: 60 mm Stroke of horizontal spindle: 65 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 1.6 / 2 kW Machine´s weight about: 1215 kg Overall dimensions machine: Len ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 350 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y axis): 300 mm Vertical travel (z axis): 380 mm Distance from vertical spindle to table: 470 mm Spindle speeds: number (steps): 18 from: 40 rpm up to: 2000 rpm Taper in spindle CN: 40 Feeds steps:: 18 longitudinal from: 10.0 mm/min up to: 500 mm/min transversal from: 10.0 mm/min up to: 500 mm/min vertical from: 10.0 mm/min up to: 500 mm/min Vertical quill travel: 100 mm Rapid traverse: longitudinal: 1.5 m/min transversal: 1.5 m/min vertical: 1.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 4.0 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 2200 mm Width: 1800 mm Height: 2000 mm Various accessories: Digital readout number of axis:: ...

Technical data Table length: 1000 mm Table width: 700 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y axis): 300 mm Vertical travel (z axis): 400 mm Travel of the upper slide: 100 mm Spindle speeds: number (steps): 18 from: 40 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 18 longitudinal from: 10.0 mm/min up to: 500 mm/min transversal from: 10.0 mm/min up to: 500 mm/min vertical from: 10.0 mm/min up to: 500 mm/min Vertical quill travel: 50 mm Rapid traverse: longitudinal: 1.5 m/min transversal: 1.5 m/min vertical: 1.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 4.0 HP Machine´s weight about: 2400 kg Overall dimensions machine: Length: 1500 mm Width: 1200 mm Height: 1800 mm Various accessories: Vice: width Digital readout number of axis:: 3 Manufacturer: HEIDENHAIN Coolant system Rigide table Vertical milling head Quick drill and milling head Angular m ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. milling cutter diameter: 0.5 mm Max. milling cutter diameter: 17.5 mm Max. radius to grind: 10 mm Collet drill: 17.5 mm Relief grinding angle max.: 45 ° Grinding wheel speeds fix: 4500 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 0.55 kW Machine´s weight about: 125 kg Overall dimensions machine: Length: 660 mm Width: 570 mm Height: 1400 mm Various accessories: Lamp Set of collets Cast-iron base

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 50 mm Vertical adjustment of the table: 50 mm Dividing attachment Table swivels: 360 ° horizontal: 360 ° vertical: 220 ° number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm Various accessories: Set of collets Set of flanges Dividing attachment universal 3-jaw chuck diameter: 85 mm Lamp Vice: width: 85 mm

Control: GRUNDIG DIALOG 112 Technical data Table length: 700 mm Table width: 400 mm Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 20 Spindle nose SK: 40 Vertical spindle speeds: stepless from: 20 rpm up to: 8000 rpm Feeds: longitudinal from: 0 mm/min up to: 10000 mm/min transversal from: 0 mm/min up to: 10000 mm/min vertical from: 0 mm/min up to: 10000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 kW Total power required: 35 kW Machine´s weight about: 6500 kg Overall dimensions machine: Length: 4000 mm Width: 3000 mm Height: 3000 mm Various accessories: Dividing attachment 4th axis

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 50 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° horizontal: 360 ° vertical: 220 ° number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm

Center distance: 250 mm Grinding head Z-axis: 0 mm Center height: 95 mm Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 50 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.50 HP Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm Various accessories: Dividing attachment Tailstock Vice: width: 80 mm