máquinas llenadoras usadas para la venta

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

FILLING MACHINE FOR SUPPOSITORIES FARMO RES, MODEL FARMODUE FD 22/U Year of construction: 1996 Automatic machine for the production of suppositories and ovules in strips of aluminum and thermoformable plastic. The product is dosed in precise volumes in the dosing station and these volumes can be changed automatically. TECHNICAL DATA Weight: kg 1930 Dimensions: mm 4650 x 3300 x 2260 Frequency: 50 Hz Voltage: 380 volts Volume of suppositories ml 0,2 – 50 Max. film height: mm 73 Production max monodoses/h: 22000 Capacity of product tank: L 55 Packing materials used: PVC, PVC+PE, PVDC, ALU+PE, PP+ALU+PE. Easy access for machine registration, cleaning, and maintenance. Format change is quick and easy, memorization of the dimensions of the parts is done from the display panel.

Horizontal bagging machine Laudenberg Mod. FBM 13, equipped with a BOSCH Mod. DOS 1B dosage system for powders. Technical data: Length: mm 3250 Width: mm 2950 Height: mm 2260 Net weight: Kg 2000 Production characteristics: Conveyor length: 1740 mm Capacity: 6 sachets/min Sachet Width: 45 – 88 mm Sachet Height: 50 – 200 mm This machine allows you to dose the product that will be packaged. The construction principle of the machine is based on an auger filler which, by turning, pushes a volume of product. The film coming from the reel is pulled and formed then sealed in four side by means of the welder. The product must be dropped in portions into the preformed tube. The filled tubular bag, with the product inside, is cut and the tube closed. The machine is complete with the feeding belt.

The machine for closing bottles in modified atmosphere and under vacuum has been designed and built according to the most modern and advanced technologies. All the solutions adopted are the result of research and design aimed at the construction of safe, reliable machines capable of guaranteeing high quality and production standards. The machine was built with high quality components to ensure low maintenance and a long operating life. The pipes, fittings, valves, materials, installed instrumentation comply with the F.D.A. All the machine parts, the smooth surfaces, the rounded corners have been specially designed for facilitate cleaning and sanitization. Length mm 4550 Width mm 2310 Net weight Kg 5000 Frequency Hz 50 Voltage Volt 380 Production 9000 Bottles / h (100 ml) Size Used bottles 50 / 100 ml Material bottles used: glass Steam consumption 300 Kg / hour Water  ...

Continuous capping machine equipped with one turret and 9 closing heads, suitable for capping plastic and glass bottles, with small footprint and high flexibility. Machine main characteristics are great flexibility, dosing accuracy, compact layout and high performances. This series is designed for the pharmaceutical sector and complies with strict GMP rules. This unit works with sterilised bottles. The bottle is conveyed inside the capping machine by the infeed belt. The carousel conveys the bottle under the capping head where it receives a cap from a mechanical vibrator and capping is carried out through a pressure system. After capping the bottle is stored in a collection box. The machine frame encloses the transmission gears, it is made of stainless steel and it is completely separated from the working area. The through tabletop conveyor, for the bottle inlet and outlet, is made ...

This unit is a filling and closing machine for metallic, aluminium tubes. The construction principles, materials used and innovative concepts guarantee maximum productivity, user friendliness and quality, making this machine an ideal solution for the pharmaceutical and the cosmetic market. Special consideration was given to a rapid change over to different tube sizes and consistency of filling product. The in-built flexibility makes it the ideal machine for use in research and development. Easy to use machine with excellent access for cleaning and maintenance. Technical data: Length mm 1825 Width mm 1115 Height mm 2150 Net weight Kg 2200 Production characteristics: Tube diam. min-max 10-52 mm Tube length min-max 52-250 mm Dosage min-max 2,5-500 ml Production capacity 40-120 tubes/min Automatic tube filling machine equipped with heated funnel, agitated hopper and 14 ...

The ML 652 is a machine with versatile modular construction for liquid filling. The unit is suitable for the treatment of various kinds of products and is designed to handle a wide range of containers and closures. The technological solutions, the quality of materials and ease of use are the elements that ensure the operational reliability. The monoblock ML 652 is an automatic machine capable of performing three operations simultaneously: a volumetric filling with syringes and two capping stations. The second capping station applies the dosing cap or aluminium cap depending on the setup. Dimensions mm: 3240 x 1750 x 1920 Weight kg: 1500 Frequency Hz: 50 Voltage Volt: 380 Power absorption kw: 6 The unit is equipped with 3 vibrating feeders for the screw caps, dosing caps and aluminium caps. Two series of syringes are supplied with the machine: one already installed with prod ...

The RFC-8 is a high-speed automatic filling and closing machine designed to perform in-line dosing, filling and capping operations of round plastic bottles and vials. Technical data: Weight Kg 800 Dosage max. ml 25 Power kW 12 Frequency Hz 50 Voltage Volt 380 Air pressure bar 6 Production max. pieces/hour 18000 Monobloc machine with continuous movement built in AISI 304 stainless steel for filling and closing bottles complete with cap elevator and circular cap vibrator. The machine fills with 12 syringes made in stainless steel and teflon and with a capacity of 25 ml each. The syringes are fully adjustable in dosage and are connected to needles by means of special tubes to supply the dosed product. The capping group is made up of 8 roller-beading closing heads. All the most important operational functions are continuously monitored through a series of sensors. T ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

Unused Kegel flow pack packaging machine, model DXDZ 250B. New 2017. Device designed for packing various types of products into foil bags, model with upper foil feed, especially recommended for small, light products, e.g. sweets, soap, parts, etc. The device packs the product into a roll of foil, wrapping it around the product from the top and welding it longitudinally from the bottom and transversely on the sides, resulting in a bag. The device is operated via a clear, easy-to-use HMI panel. Independently adjustable longitudinal and transverse welding temperatures. A photocell enabling work with printed foil, with a marker, guaranteeing accuracy and high aesthetics of the final product. Rotating heating jaws, failure diagnosis system. Technical parameters: Voltage 220V, 50/60 Hz Motor power 2.4 kW Foil width: 30-110 mm Bag length: 65-190 mm or 120-280 mm Bag width 30-11 ...

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers

TETRA PAK TBA 8 500ML SLIM FILLING MACHINE FOR SALE Item #: Usm-183 Category Tetra Pak TBA 8 TBA 8 500ml Slim Filling Machine with 30 meter Conveyors,Version 120v, Year of manufacturing 2005 and Working Hours 1000 After refurbishment. Condition: Excellent Condition, Installed and Test Run Possible.

Next TETRA PAK TBA 19 125ML SLIM COMPLETE LINE FOR SALE Item #: Usm-182 Category Tetra Pak TBA 19 TBA 19 125ml Filling Machine,Version 10v Year of manufacturing 2003 Tetra Straw Applicator TSA 21, Year of manufacturing 2003 Tetra Packer, TCBP 70, Year of manufacturing 2003 Tetra Shrink TTS 51, Year of manufacturing 2003 Tetra Easy Ride & Conveyors Control System Conveyors & Paper Trolly Condition: Excellent & tetra pak maintained.

TETRA PAK HIGH SPEED TBA 22 200ML SLIM COMPLETE LINE FOR SALE Item #: Usm-181 Category Tetra Pak TBA 22 TBA 22 200ml Slim Filling Machine,Speed 20000 Packs per hour, Version 50v, Year of manufacturing 2009 Helix Accumulator, Year of manufacturing 2009 Tetra Pak Bundler, Year of manufacturing 2007 Tetra Straw Applicator 22, Year of manufacturing 2007 Tetra Packer 70, Year of manufacturing 2009 Tetra Multi Shrink Wrap,Year of manufacturing 2007 Conveyors and Paper Trolly. Condition: Still on production & tetra pak maintained.

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR SALE Item #: Usm-179 Category Cap Applicator One Used Tetra Pak Cap Applicator 30 Flex For Sale: Flexible cap applicator for portion and family packages of aseptic brick pack product Output: 6600 - 9000 packages per hour Package volume: 200 - 2000 milliliters Package types: Tetra Gemina® Aseptic, Tetra Brik® Aseptic, Tetra Prisma® Aseptic (different package types and sizes may require OEM change parts) Allen-Bradley Logix5561 controls Nordson hot melt glue unit Stainless steel construction Touch screen HMI Servo driven Electrical Information 400/230 Voltage 3 Phase 60 Hertz

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR HELICAP 23 Item #: Usm-178 Category Cap Applicator We are selling one Used Tetra Pak Cap Applicator 30 Flex Tetra Cap Applicator 30 Flex, Year of manufactuirng 2010, Working Hours 22400, Cap Type Heli Cap 23 Condition: Good  ... más información

Qty. 1 Second-hand PET blowing and water filling line Mfc.: Tanner AG, SACMI, FT System, Krones & others Built: 2005-2013 Capacity: 12,000 bph on 1.5 L - Pack 3X2 16,200 bph on 0.5 L - Pack 4X3 16,200 bph on 0.35 L - 4X3 pack Product: Still and sparkling water Cap: 28 mm PCO 1881 Mould series: 3 sets of moulds for 0.35 L/0.5 L/1.5 L Note: The line is in production until the end of October 2023 Various new mechanical and electrical spare parts to the value of EUR 200 k are available with the line.

One (1) PER-FIL® Industries Model MF MICRO-FILLER, portable Auger Filler. The MF is designed for safe, accurate and dust-free dispensing of customer's product nto designated container. STANDARD FEATURES: Variable speed auger and agitator drive system, 0.5 hp permanent magnet, totally enclosed and non-ventilated motor with heavy duty gear reducer. 12" diameter, 20 liter stainless steel hopper mounted with quick disconnect hand knobs. Hopper is positioned with locating pins for convenient removal and positive assembly. Stainless steel NEMA 4X dust and water proof electrical enclosure securely mounted to the frame of the filler. Enclosure includes PLC and touchscreen operator interface for simple adjustment of all filler parameters and allows operator to save settings as a "RECIPE." Up to 30 recipes can be stored in the operator interface. Variable speed auger drive con ...