otras máquinas de alimentos usadas para la venta

Height=1.67 m, Overall length= 1.66 m, Overall width= 0.95 m, Net weight= 240 kg,  ... más información

Height=1.1 m, Overall length= 0.6 m, Overall width= 0.63 m, Net weight= 72 kg,  ... más información

Height=0.7 m, Overall length= 3 m, Overall width= 0.8 m, Net weight= 1000 kg,  ... más información

Height=2.15 m, Overall length= 1.72 m, Overall width= 1.08 m, Net weight= 260 kg,  ... más información

Height=2.35 m, Overall length= 2.1 m, Overall width= 2.15 m, Net weight= 1200 kg,  ... más información

Height=1.49 m, Overall length= 3.05 m, Overall width= 0.96 m, Net weight= 310 kg,  ... más información

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, baseframe with feet, manometers, counter pressure valve, flow regulation valve, water valves, control panel, sludge tank and service tools for maintenance including pressing tool., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Condition Status: Used, Capacity: 15.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph

JUICE PREPARATION PLANT A) Tetra Almix Spark 020V Year of manufacture: 2001 Make: Tetra Pak Installed options: vacuum cleaner; Drum emptying station Capacity: 0-15000 l/h Sealing water: connection 1/2", capacity 700l/h, temperature 15C, pressure 0.3bar Instrument air: connection 1/2", power 150 NI/h, pressure 600 kpa Treated water: SMS 51 connection, capacity 0-15000 l/h, ambient temperature, pressure 300kpa Product outlet: SMS 63 connection, capacity 0-15000 l/h, pressure 300 kpa B) Tetra Alblend Spark Year of manufacture: 2001 Capacity: 5000 l/h CIP capacity. 10000 l/h Sugar Brix: 60Brix Treated water: Connection DIN50, temperature 10C, pressure 150kPa Sugar: Terminal DIN40, temperature 25C, pressure 400kPa Concentrate: Terminal DIN40, temperature 25C, pressure 400kPa CIP: DN50 terminal, 300kPa pressure CO2/N2: DN25 connection, pressure 600kPa Electric ...

USED STORK UHT PLANT Make: Stork Model: 2000 Completely refurbished in 2015 Capacity: 1,600 l/h Products: UHT milk: plain/white, chocolate, flavoured, soya UHT drinks Siemens S7 PLC Condition: Very good used condition  ... más información

Water dispenser MEMBRATECH A505, Reverse osmosis system, S/N D4V/ 1001015, refrigerant: R134a, The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

This Alfa Laval CPM Constant-Pressure Modulating Valve (CPMI-2) is a pneumatic regulating valve that maintains a constant pressure in hygienic process lines at the valve inlet or outlet. This model is a Kv23 with booster. Capacity: ± 23 m3/h. Safe, reliable and easy to clean, these regulating valves provide accurate pressure control, quickly adjusting position to maintain the pressure at pre-set values without any need for electronic control. This pneumatic regulating valve maintains uniform inlet or outlet pressure in hygienic process lines for the dairy, food, beverage, personal care and many other industries. Typical applications include filling and bottling equipment. The CPMI-2 consist of a valve body with valve seat, cover, valve plug with a special diaphragm and clamp. The diaphragm consists of two flexible PTFE and EPDM diaphragms supported by 12 stainless steel sectors between  ...

1 wastewater treatment plant for the treatment of industrial wastewater from the albi fruit juice factory in Berghülen Foreword The wastewater plant described below was designed as a COD mining plant operated without sewage sludge preparation. Commissioning: 1999 The wastewater load of approx. 136m³ / day from the albi fruit juice Production ranged from 2,000 mgO2/l to 8,000 mgO2/l Running time 24 hours, input approx. 5.6 m³/h, COD degradation up to 975 kg COD/day If a sludge filter press was used, approx. 700 kg of wastewater sludge. This sewage sludge Filtration is not installed because the municipality of this wastewater treatment plant, the reduction of wastewater content but the hydraulic load should be able to support the municipal Reach the sewage system. The complete wastewater treatment plant consists of the following components: A.) 1 free-st ...

1 diesel emergency power generator 120 kVA in the output Manufacturer Klöckner-Humboldt Deutz AG, Cologne Type : A8/614, No. 1626 959/66, HP PS 120/PEP/7C, 1,600 rpm with self-regulating AvK generator by AvK Frankfurt 90 to 100 kW, only 39.5 operating hours 1 diesel emergency power generator 120 kVA in the output Manufacturer Klöckner-Humboldt Deutz AG, Cologne Type: A8 / 614, No. 1626 959/66, HP PS 120 / PEP / 7C, 1,600 rpm with self-regulating AvK generator from AvK Frankfurt 90 to 100 kW, only 39.5 operating hours

1 small Loos steam boiler standing on frame Capacity: 2,000 kg/h at 10 bar Built in 1993 with Weißhaupt gas burner Gas burner type G750 1-D Power 300-170 kW No. 383 76 96 With exhaust pipe in metal chimney With horizontal condensate stacking container Capacity approx. 2,500 l With steam outlet pipes, everything clean and steam installed without dents and chimney gas pipes with gas supply line and gas shut-off valve. with rectangular boiler feed water treatment Container, capacity 1,400 l With upright control cabinet for the boiler house With Loos wall-mounted control cabinet for operating the Boiler plant 1 small Loos steam boiler standing on frame Output: 2,000 kg/h at 10 bar Year of construction 1993 with Weißhaupt gas burner Gas burner type G750 1-D Power 300-170 kW No. 383 76 96 With exhaust pipe in metal chimney With horizontal condensate stacki ...

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important contr ...

1 fully automatic film multi-shrink system With 2 identical Meurer films single packaging- shrink-wrapping systems. Shrivelled 200 ml packages are divided into 5 or 2 x 5-sticks from the Meurer Karton Manufacturing and packaging system and divided into 10 or 20 individual packaging. Achievement: The inlet from the 2 individual shrink lines to the Meurer carton packaging machine was 22,500 : 5 = 4,500 pieces of 5-pack individual packaging sticks with 200 ml Tetrapack base packaging Manufacturer: Meurer Type: CM/BK 45 T80 Machine No. 861.5005.0199 Year of construction 2006 2 Meurer shrink lines with side-mounted 2 film roll unwinding systems per machine in order to carry out a film roll change at during ongoing operations a.) 1 fully automatic film multi-shrink system Manufacturer: Meurer Type: CM/BK 40 T80 Machine No. 861.004.0199 Built in 1999 Height of ...

1 aseptic SIG Combiblock carton filling machine Type: CB 510 int. name: Combiblock Line 4 Capacity: 10,000 packs/hour for filling UHT milk, UHT mixed milk beverages such as cocoa and fruit milk drinks When bottling drinking water and juices, with the aseptically filling Combiblock Filling machine Shelf life of over 1 year in connection with a UHT heating system system (up to 143°C). Standard formats: 500 ml, 750 ml and 1,000 ml Format changeover within 2 min without Replacing parts With 3 packing lanes side by side With valve manifold With all the surrounding machines to Production of aseptic packaging with screw cap Energy consumption: Electricity: approx. 50 kWh Compressed air: 6 bar, approx. 70 Nm³/h Water drinking water quality: approx. 400-600 l/h Steam: saturated steam 4-16 bar, min. 60 kg/h, Temp. min.154°C, consumption production with steam inje ...

Apple - pomace drying as a preliminary stage for pectin extraction Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple damp pomace coming from the winery was with a screw of transport into an open-top pomace conveyor system diagonally upwards, and then then over a further transport auger, D= 600 mm into the all-round round drying chamber, D = 360 mm, L= 11,400 mm. With a shovel welded on the inside in the drying chamber, the still moist pomace stirs intensively with the hot air. At the same time, a gas burner flame and the stove the hot gases are blown into the drying chamber. Length of burner and furnace together: 6,500 mm The pomace waste dried and crushed in this way is discharged via an ejection chamber located directly at the end of the drying chamber with a transport screw into the stan ...