advanced search
37094 results
New in: 2017
used
DMG MORI CLX 350 CNC turning center manufactured in 2017 is used for precision machining of workpieces with a maximum diameter of 610 mm. In order to meet even the most intensive production challenges, the machine uses high-quality components and modern solutions. Inside the large working area, there is a specially designed inclined bed that dampens any vibrations and oscillations generated during machining. This solution results in, among others, a better quality of the machined surface or an increased service life of the cutting tools. To this date, the DMG MORI CNC lathe has only worked for 4611 hours. The total weight of the machine is approximately 4700 kg. Technical data of the DMG MORI CLX 350 lathe - - maximum turning diameter: 320 mm turning diameter (over the bed): 610 mm - turning diameter (over cross sledge): 400 mm - feed in the X/Z axis: 242.5/580 mm - rapid travers ...
New in: 2021
used
ULTRAPRAS WPK 1250 hydraulic press brake which was built in 2021 in Poland, provides excellent precision sheet metal bending under almost all conditions. The extremely easy-to-operate machine with its compact design has an opening top beam, which also enables machining of closed-profile workpieces. In the machining process, the UltraPras WPK-1250 workshop press brake uses a powerful hydraulic-based drive and high-quality tools in the form of bending prisms and punches. The tools can be changed at any time to adapt the operating mode to the type of machining. When the length of the bent sheet is reduced, its maximum thickness increases. All these features make the WPK1250 press brake ideal for locksmiths and mechanical workshops. The total weight of the machine is 1400 kg. Technical parameters of the ULTRAPRAS WPK 1250 press brake - maximum press force: 32 t - maximum workpiece lengt ...
New in: 2011
used
DMG CTX 310 ECO CNC lathe was built in 2011. The machine, characterised by high productivity and precision, is designed for machining workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large working area using reliable components in the form of a high-speed spindle and cutting tools. During the turning process, a specially designed inclined bed effectively eliminates any vibrations and oscillations, ensuring the highest possible process stability. The offered DMG GILDEMEISTER CTX 310 Ecoline CNC turning center also features an integrated chip conveyor and a perfectly optimised SIEMENS CNC control. The total weight of the machine is 3400 kg. Technical data of the DMG CTX 310 ECO turning center - maximum turning diameter: 200 mm - maximum swing diameter: 330 mm - maximum swing diameter above cross guideway: 260 mm - feed in the X/Z axis: 160/45 ...
New in: 2020
used
UNI-KAT SPARK 2 oxygen plasma cutting machine built in 2020 in Poland, is used in the thermal cutting of steel sheets. This versatile machine with extensive machining capabilities is ideal for even the most intensive applications in any production facility. Thanks to its extremely stable design with a large work area, the UNI-KAT SPARK2 plasma-gas cutting machine offers much greater cutting precision, compared to single-support cutting machines. In addition, in order to simplify the performed work, the drawings of the cut parts can be produced in most vector graphics programs. The offer also includes extensive additional equipment, including e.g. a HARRIS 198-2TF torch powered by technical propane-butane and technical oxygen, advanced CAD/CAM software and an air compressor. The machine has so far worked for current production (one shift) and has been regularly serviced. The UNI-KAT pl ...
New in: 2008
used
DMG GILDEMEISTER CTX 510 CNC turning center was built in 2008. Designed for machining workpieces with a maximum diameter of 465 mm, the machine features a fully illuminated workspace, a high-speed spindle and high-end cutting tools. The extremely stable design combined with the perfectly optimised SIEMENS CNC control ensures maximum process efficiency, even during the most intensive production work. The DMG CTX 510 CNC lathe weighs 7500 kg. Technical specifications of the DMG GILDEMEISTER CTX 510 lathe - maximum turning diameter: 465 mm - maximum swing diameter: 680 mm - maximum swing diameter above cross guideway: 465 mm - feed in the X/Z axis: 300/1050 mm - rapid traverse in X,Z axis: 30 m/min - maximum spindle rotational speed: 3500 rpm - spindle passage: 76 mm - spindle drive power (40%/100% DC): 42/31 kW - operating hours: 13902 h - installed power: 50 kVA - power supp ...
New in: 2001
used
H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...
New in: 2006
used
DMG GILDEMEISTER CTX 410 CNC lathe built in 2006 is an extremely powerful machine designed for precision machining of workpieces with a maximum diameter of 320 mm. The machining process is performed inside a large, fully illuminated workspace using reliable components in the form of cutting tools and a high-speed spindle. The specially designed inclined bed effectively dampens all vibrations and oscillations, resulting in better quality of the machined surface and increased tool life. The offered DMG CTX 410 CNC turning center is also equipped with an integrated chip conveyor and a perfectly optimised, intuitive HEIDENHAIN CNC control. The total weight of the machine is approximately 6000 kg. Technical specifications of the DMG GILDEMEISTER CTX 410 turning center - CNC controller: HEIDENHAIN - turning diameter: 320 mm - turning length: 600 mm - feed in the X/Z axis: 250/635 mm - ...
New in: 1997
used
GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotational speed range: 80-2800 rpm - main spindle passage: 70 mm - main spindle drive power: 11 kW - maximum sub-spindle rotational speed: 5000 rpm - sub-spindle drive power: 7.5 kW - total power require ...
New in: 1995
used
PORĘBA TR 115 B2 x 2M lathe made in 1995 in Poland is used for unit or small batch production. The rigid, stable construction of the machine enables machining of large rotating parts with excellent efficiency and precision. In addition, the high-powered motor allows full utilisation of the capabilities of the cutting tools. The PORĘBA TR 115 B2 x 2000 universal lathe weighs 9000 kg. Technical parameters of the PORĘBA TR 115 B2 x 2M metal lathe - turning diameter (above the bed): 1150 mm - turning diameter (above the saddle): 850 mm - turning diameter (in the bridge): 1480 mm - maximum turning length: 2000 mm - maximum turning chuck diameter: 115 cm - workspace illumination - weight of machine: 9000 kg
New in: 2008
used
DMG GILDEMEISTER CTX ALPHA 300 CNC turning center was built in 2008. The machine, designed for machining workpieces with a maximum diameter of 500 mm, is equipped with state-of-the-art technical solutions that guarantee extraordinary accuracy and precision. Machining is performed inside a large, fully illuminated workspace by a reliable spindle and high-quality cutting tools taken from a 12-position turret. In turn, the operator is provided with a state-of-the-art touchscreen control panel with a perfectly optimised FANUC CNC controller. High reliability, precision and structural stability make the GILDEMEISTER CTX ALPHA 300 CNC lathe the perfect choice for even the most intensive production work. The total weight of the machine is approximately 4350 kg. Technical data of the DMG GILDEMEISTER CTX ALPHA 300 lathe - maximum turning diameter: 500 mm - maximum cutting diameter: 200 mm ...
New in: 2013
used
DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...
New in: 2011
used
DMG CTX 510 ECO CNC turning center built in 2011 is used for precision machining of workpieces with a maximum diameter of 465 mm. This extremely efficient and perfectly optimised machine features a specially constructed, inclined bed that effectively dampens all vibrations and oscillations. This solution ensures the highest possible process stability, bringing results such as improved workpiece surface quality or increased cutting tool life. Workpiece machining is carried out using reliable components in the form of a high-speed spindle and cutting tools taken from a 12-position turret. Tools are changed in a very short time, so that the overall process time is significantly reduced. The DMG GILDEMEISTER CTX 510 ECO CNC lathe also features an intuitive SIEMENS CNC control and an integrated chip conveyor. The total weight of the machine is 7800 kg. Technical parameters of the DMG CT ...
New in: 1999
used
DECKEL MAHO DMU 50 EVOLUTION CNC machining centre was manufactured in Germany in 1999. The machine designed for precision machining of workpieces, has a high-quality steel construction, equipped with the best components. The machining process of metals is performed on a 500 mm long and 380 mm wide milling centre work table, using a powerful 15 kW spindle, guaranteeing excellent precision and a significant reduction in milling time. The CNC milling machine has 5 axes (X,Y,Z,C,B) with feeds of 500 mm (X axis), 420 mm (Y axis), 380 mm (Z axis), 180° (C axis) and 360° (B axis). A wide range of equipment is offered with the vertical machining centre, including: a control panel with HEIDENHAIN TNC 430 CNC control installed, a capacious tool magazine and a workpiece probe. The total weight of the machine is 6000 kg. Technical data of the CNC DECKEL MAHO DMU 50 EVOLUTION milling centre ...
New in: 1999
used
CINCINNATI HAWK TC-150 CNC turning center which was built in 1999, is used for precision machining of workpieces with a maximum diameter of 300 mm. The machining process is performed inside a large workspace by means of reliable components in the form of cutting tools and a high-speed spindle. This solution, combined with an extremely stable design, results in workpieces of excellent quality and precision. The HAWK TC 150 CNC lathe also features an integrated chip conveyor and an intuitive CNC controller. The total weight of the machine is approximately 3500 kg. Technical parameters of the CINCINNATI HAWK TC-150 lathe - CNC controller: VICKERS ACRAMATIC 2100 - turning diameter (over bed): 300 mm - turning diameter (over saddle): 250 mm - maximum turning length: 500 mm - feed in the X/Z axis: 215/438 mm - maximum spindle rotational speed: 5500 rpm - spindle passage: 51 mm - 12- ...
New in: 1999
used
CINCINNATI ARROW 500 CNC milling machine built in 1999, is the perfect choice for precision machining of workpieces in series and unit production. The machining process is carried out using reliable components in the form of tools taken from a 21-position magazine and a high-speed spindle. During machining, the extremely stable machine design effectively dampens any vibrations and oscillations, resulting in improved workpiece surface quality and increased tool life. The CINCINNATI CNC machining center also features an intuitive CNC controller, which allows the process to be quickly and easily programmed and controlled. The total weight of the machine is 3050 kg. Technical specifications of the CINCINNATI ARROW 500 milling center - CNC controller: ACRAMATIC 2100E - number of axes: 3 - feed in X/Y/Z axis: 510/510/510 mm - work table dimensions (L x W): 520 x 700 mm - maximum spindl ...
New in: 2015
used
AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder ...
New in: 2014
used
DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...
New in: 2017
used
FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330 ...
New in: 2015
used
DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...
New in: 2007
used
DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg