advanced search
37185 results
New in: 1985
used
Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.
New in: 2022
new
Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.
new
Demonstration device, 24 months warranty, stock -Interior stainless steel (304 Stainless) -Outside powder-coated RAL 7035 -Temperature max. 300°C -Inside BxDxH 1000 x 500 x 860 mm -Outside BxDxH 1200 x 905 x 1200 mm -Content 420 liters, table top -Control panel in the socket -Omron E5CC controller -Digitaltimer -Overtemperature protection -Temperature accuracy +/- 9°C in an empty oven at a constant 300°C -3 shelves -Recirculation fan on the back -Speed control -Power 6.2 KW -Connection 400 V , 3 phased -incl. documentation, CE declaration This laboratory cabinet is available in complete stainless steel version in 60, 120, 220 and 420 liters immediately.
New in: 2022
used
New device with new machines Warranty -Temperature 250°C -Inside BxDxH 1500 x 3000 x 2000 mm -Outside BxDxH 2410 x 3560 x 2730 mm -Content 9000 litres -Control Omron E5CC (target actual value controller) -Time timer Galaxy -Overtemperature protection Omron K8 Relay -Entry lanes -2 pcs circulating air fans -Exhaust air and supply air flap manually adjustable -Safety door switch -Power 43 KW -Connection 400 V , 3 phased -not suitable for solvent-containing substances -Temperature accuracy +/- 5°C -incl. documentation, CE declaration We are happy to offer installation and commissioning.
New in: 2013
used
Catalog No. : 7622 Type: PUMA 2100 MS Producer: DOOSAN Made in: 2013 Characteristic: Control system: FANUC Total hours: 77836 h Hours on: 24037 h Maximum-turning length: 520 mm Max. turning diameter: 406 mm Maximum travel length in the X-axis: 259 mm Maximum feedrate in the Z axis: 589 mm Length: 3100 mm Width: 1861 mm Height: 1899 mm Weight: 5000 kg Equipment: Späneförderer Pump 15 bar 4 tool holders Live Tools (two radial and two axial)
New in: 2021
used
Inv. Num. : 7621 Type: LYNX 2100 GA Produzent: DOOSAN Erzeugt: 2021 Parametern: Steuerungssystem: DOOSAN FANUC iSeries Einschaltstunden: 4017 h Betriebsstunden: 130 h Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 350 mm Maximale Länge Verfahrweg in der X-Achse: 205 mm Maximale Länge Verfahrweg in der Y-Achse: 105 mm Maximaler Vorschub in der Z-Achse: 560 mm Länge: 1595 mm Breite: 2570 mm Höhe: 1693 mm Gewicht: 3480 kg Ausstattung: Platzsparender Stangenlader 8 Stück Werkzeughalter
used
Inv. Num. : 7626 Type:- Producer: GG Macchine Generated: Parameters: The line is in good technical condition.
New in: 1998
used
Inv. Num. : 7627 Type: XZLP 100/16 Producer: ESPE Created: 1998 Parameters: Maximum sheet thickness when rolling in: 16 mm Number of driven rollers: 3 pieces Shaft diameter: 100 mm Cylinder diameter: 340 mm Maximum bending speed: 6 m/min Length: 1570 mm Width: 1434 mm Height: 1578 mm Weight: 3950 kg Equipment: Pulleys
New in: 2021
used
New in: 2021
new
Model: EL390/1301 Quantity: 8 pieces Year of production: 2021 Travel 8000 mm Length 9000 mm
New in: 2001
used
- Control: Heidenhain TNC 310 track control - Clamping surface: 400 x 800 mm - Max. table load: 400 kg - Travel distances: X= 620, Y= 420, Z= 400 mm - Tool holder: ISO 40 - Spindle speed: 50 - 4,000 1/min Dimensions LxWxH: 2300 x 2350 x 1970 mm Weight: 1,900 kg
New in: 2011
used
1 off CNC Turning Center Mori Seiki NTX1000 Tractor Mfg. Year 2011 Serial Number NTX10KD0080 MSX-711V, MAPPS 4 Control Main spindle 11/7.5 kW Max. Spindle Speed 6,000 rpm 3-Jaw Chuck Kitagawa Dia. 210 mm Subspindle 7.5/5.5 kW Max. Spindle Speed 6,000 rpm 3-Jaw Chuck Kitagawa Dia. 130 mm Milling Spindle 9/5.5 kW Max. spindle speed 12,000 rpm Capto C5 System Coolant th. Milling spindle B-Axis full indexing specification Lower Turret 10 Stations, all Stations for driven Tools ATC with 72 Stations Swarfconveyor, exit to the right High Pressure Coolant Spindle Chuck Air Blow left/right Spindle Tool Tip (Millingspindle) Air Blow Tool Presetter Workpiece Unloading Conveyor Barfeeder Interface B-Axis Scale Magnescale Simultaneous 5 Axis Control Tool Center Point Control Automatic Poweroff Workpiece Setting Err ...
New in: 1982
used
Offer 24124 Specifications: - Bear weight 30 kg - Impact regulation - Lifting height infinitely adjustable 320 mm - Impact rate approx. 180 1/min - Projection 350 - Anvil height approx. 560 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 500 x H 1250 x D 1800 mm - Weight approx. 450 kg
New in: 2019
used
CNC turning center SPINNER TTS 65-Triplex Year of construction 2019 Fanuc Series 31i Model B Travel: X1/X3: 180 mm X2: 180 mm Y1/Y3: 90 mm Z1/Z2: 620 mm Rapid traverse X,Y,Z: 30 m/min Main spindle 22 kW Max. speed: 5,000 rpm Max. bar passage: 65 mm Sub-spindle 22 kW Max. speed: 7,000 rpm 3 x 12-cavity tool turret 3 x 12 powered tool stations Max. speed: 8,000 rpm Separate coolant system with coolant filtration and high-pressure pumps Hyfra coolant temperature control Top Automazioni X-files Bar Feeders, Bars up to 3,000 mm Conveyor CE mark
used
DOUBLE-SIDED LAPPING MACHINE IN GOOD CONDITION
New in: 2019
used
BRUSH WITH DOUBLE HEAD AND FIVE BRUSHES EACH BELT SYSTEM TO TURN THE WORKPIECE DEMAGNETIZER INCLUDED IN PARTS OUTLET AIR PURIFICATION EQUIPMENT MAGNET FILTRATION EQUIPMENT SPARE TAPES REPLACEMENT BRUSHES VALUED AT +3000 EUROS
New in: 2019
used
PRACTICALLY NEW MACHINE WITH VERY LITTLE USE, INCLUDES CHILLER, AND TANK WITH FILTER AND MAGNET SET OF NEW REPLACEMENT GRINDING WHEELS VALUED AT + 40000 EUROS.
New in: 1989
used
Specifications: - Saw blade dimensions 420 x 3.5 x 40 mm - Horizontal mitre adjustment 45° - 90° - 20° - Vertical mitre adjustment 60° 90° - 45° - Cutting area - at 90° W 450 x H 170 mm - at 45° W 310 x H 135 mm - inclined at 45° H 115 mm - Working height 900 mm - Saw blade speed 3500 rpm - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 1400 x D 1600 mm - Weight approx. 180 kg -with: - hydr. Feed brake -Saw blade - pneum. Workpiece clamping - Saw blade spraying device -Org. Machine stand - Discharge roller conveyor with dimension stop 3000 mm
New in: 2015
used
CNC Lathe MAZAK QT SMART 250 ML (500U) Year of construction 07-2015 Mazatrol Smart Control Travel X/Z: 225 mm/605 mm. Max. turning diameter 360 mm Max. swing diameter 660 mm Max. turning length 497 mm Max. bar passage 80 mm Spindle motor AC18.5 kW Max. spindle speed 4,000 rpm 12-speed tool turret 12 driven tool stations AC 5.5 kW Driven tools max. speed 4,500 rpm Toolsetter Automatic Parts Catcher Tailstock High Pressure Pump Interface for bar feeder Conveyor CE mark
New in: 2006
used
Specifications: Travel X/Y/Z: 800 mm Max. workpiece width: 1130 / D900 mm Ma. workpiece height: 1350 mm Position spreading width Ps: 0.004 mm Position uncertainty P: 0.006 mm Machine Table: Length x width, clamping surface: 630 x 630 mm Max. load: 1200 kg Dimensions of spindle center over table: 150 mm Dimensions of spindle nose in front of the centre of the table: 100 mm 0° and 180°: 100 mm 90° and 270°: 100 mm Center mount: 50 mm Spindle / Main Drive: Tool holder milling spindle: SK 50 Milling spindle speed: 8000 1/min Speed range: 20 - 8000 1/min NC rotary table: 360 x 0.001 degrees Equipment: - Siemens 840D control system - Number of tool positions: 240 - Number of pallets: 6 - 2 set-up stations integrated in Fastems system - Tool life monitoring - Feed force monitoring - Torque monitoring - Ringler chip vacuum cleaner -Conveyor - Pallet storage : F ...