Silo mixer: 7500 litres, motor: 11 Kw (15 hp). With pelican mouth and electrical panel.
Shredder mill with blades Brand: Navarro, motor: 30 hp, cutting chamber: 450x400 mm, electrical panel. With opening and closing, hydraulic hopper and soundproof hopper.
Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.
Water-based head cutting, brand: Gamma Meccanica, type: TFD150, year: 1996. Centrifuge: 4 hp (3 kw).
Extrusion line for the manufacture of 100 mm forest protector composed of: - Extruder 1 spindle, brand: Flag, 60 mm 25 L / D, motor: 30 hp. With variable speed drive and electrical panel. With charger on single-phase hopper. - Stainless steel cooling bath: 4 m. With 2 vacuum pumps: 4 Kw (5.5 hp) each. - Drag trolley: 2100x190 mm - Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.
Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.
Hydraulic shear (guillotine) Brand: La Metalurgica, measures wide cut: 650 mm, height: 580 mm, motor: 4 Kw (5.5 hp).
Refrigeration equipment. Brand: Ferroli, model: RGA IR200.2VB AB OM5. J020, frigories: 198.000, power: 71.6 Kw, Amp: 170, gas: R410A.
Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder wi ...
Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.
Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...
Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.
Grinder mill with blades Soundproofed. Cutting chamber: 650x650 mm, motor: 37 Kw (50 hp). Stepped rotor. With electrical panel and 5 spare screens.
Full 16 mm dropper inserting machine, with winder, vibrator, dropper dispenser and double end winder.
Worm Diameter: 300 mm, length: 5000 mm, discharge mouth: 320x320 mm, motor: 3 Kw
Extrusion line for the manufacture of 30 and 40 mm tutors composed of: - 1 spindle extruder: 60 mm Ø Plasticization 25 L/D. Brand: Flag, motor: 32 Kw (45 hp) direct current, year: 1998. With variable speed drive, gearbox and electrical panel. - Cooling bath: 3 m, with caliper, water pump: 3 hp, vacuum pump: 4 Kw (5.5 hp). - Track drag trolley: 1300x130 mm, brand: Weber, model: RA302, motor: 5.5 Kw. - Cutting saw brand: Pericolo, diameter: 300 mm, motor: 2.2 Kw (3 hp).
Extrusion line for manufacture of PS-PE-ABS-PP sheets etc ... Brand: Siepla Year of manufacture: 2008 Four-cylinder grille with servo-controllers Flat head: Maximum head width: 1000mm Maximum aperture up to: 2mm Minimum aperture: 200 microns Built-in shear for cutting plates. Two single-screw extruders: Ø 120mm and Ø 75mm MAAG melt pump and vertical pump: 1300 m3/h, 1350 rpm. Type: G160A Drag trolley Production capacity: 250 – 350 Kg/h Horizontal hydraulic changer with double cavity: Ø 16 mm. Manuals are available for each machine station as well as for compliance with EC directives.
Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.