advanced search
1359 results
New in: 2011
used
MEWA UG 1007 MS Power 160 kW Condition: used in need of repair Rotor blades: 25 pieces Stator knives: 10 pieces incl. hopper with pusher Switchboard Discharge chute Hydraulic Screen lifter Very few hours of operation. The machine has been unused for several years. Total weight approx. 15 t Delivery time : immediately
used
Ex Starfighter BW Please inquire with location and postcode VAT not deductible
used
5.5 kW without controller Please inquire with location and postcode. VAT not deductible
New in: 2018
used
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...
New in: 2016
used
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)
used
Friction scrubber with stainless steel housing and stainless steel rotor. Drive motor 22 kW
New in: 2023
new
VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...
new
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
New in: 2023
new
Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover ...
used
HÖCKER POLYTECHNIK PHSS 1500 single shaft EPS grinding machine Styrofoam grinding machine WITH EXTRACTOR VACUUM SYSTEM HÖCKER POLYTECHNIK second-hand German-made 7.5 kW EPS grinder. Functional machine in good technical condition. Manufacturer: HÖCKER POLYTECHNIK Model: PHSS 1500 Year: 2001/05 Condition: used machine in working condition; Electric motor power: 7.5 kW Number of axles: 1 Shaft length: 1500 mm Hopper loading: yes Sieve: none Control Panel: yes Emergency button: yes Dimensions: 3100 x 900 x 2200 mm Weight: approx. 1000 kg Uploading on the truck is free of charge. Can be inspected in our warehouse in Székesfehérvár 8000, Hungary. For further information please contact us.
used
INDUSTRIAL CONFIDENTIAL SHREDDER Type: Single-Shaft Shredding System Manufacturer: ERDWICH Model: M400/1-400 Condition: Used, very good condition, serviced. Power: 2.2kW 400v 50Hz 3Phs Screen Perforations: 12mm Description: Premium German designed and built heavy-duty, industrial, single-shaft shredder. Used for the size-reduction, destruction of confidential documents and materials, such as identification card and passports. Principle of Operation: Fully self-contained size-reduction solution, material is loaded, via the gas strut assisted door, at the top of the shredder. Material is shredded by a series of cutting tools, mounted to a rotor which passes through a static knife until small enough to pass through a perforated screen and discharged at the base of the machine. The shredder has both pneumatic pusher ram (introducing material to the rotor) and H²0 misting ...
used
RAPID 300 MILL granulator exhaust fan and cyclone Manufacturer: RAPID Condition: good condition, ready for operation Electrical engine installed power: 11 kW Nr. of shaft: 1 Shaft length: 300 mm Blades: 4 rotating cutting blades/ 1 stationary blade Working space: 300 x 300 mm Sieve: yes Control panel: yes Exhaust fan: yes Cyclone: yes Input hopper: yes Weight: apx. 450 kg Uploading on the truck is free of charge. Can be inspected in our warehouse in Székesfehérvár 8000, Hungary. For further information please contact us.
used
MOCO AZ11 TWIN-SHAFT SHREDDER Manufacturer: MOCO Type: AZ11 Shaft length: 400 mm Dimensions: 2320 x 1000 x 1950 mm Weight: 1300 kg Installed power of main engine: 15 kW Shredding knives: 2 X 12 ROTATING BLADE (+ CLEANING BLADES) THE SYSTEM MOCO AZ 11, shredder with slow and low noise running hexagon working shafts. Low vibration and minimal maintenance, compact design, robust welded construction, low power consumption, individually replaceable cutting discs. THE ELECTRIC The control of the AC geared motor is equipped with an automatic overload-dependent reverse control. The machine can be inspected in our warehouse in Székesfehérvár-8000 Hungary. For further information please contact us.
New in: 2023
new
KG 50 Year of construction 2023 Condition new Description cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 3 - 30mm Weight 515KG Can be inspected in Hungary 8000. Available immediately from stock.
New in: 2023
new
STOKKERMILL K750 cable granulator-separator machine FROM STOCK! Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35* mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetr ...
used
Horizontal Hydraulic Press Function: Making Bullets Tying: Automatic Brand: Jovisa Model No.: JS-400-VA Engine: 7.5 KW (10 hp) Bullet size: 800x500 mm Bale weight: 300 Kg approx Feeding mouth: 1200x800 mm. Reference: MF-0090
New in: 2013
used
Shredder HSM Powerline FA 500.3, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of construction: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in 80g/m² sheet: 180-200 Hopper volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg
New in: 2011
used
Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.
used
TRIA GRANULATOR XT 100-80, (machine offered totally reconditioned - photos taken before reconditioning was completed), - Granulating chamber mm.1.040*800 (40,94*31,50”), - 110 kw drive, - New rotor, diam 620 mm (24,41”) 1.000 mm.wide (40), - N.5 Rotor knifes, - N.2 Fixed knifes, - Electrical hopper opening, - Blower and cyclone Included, - new electric panel, - rotor bearings, motor bearings replaced, - 12 mm dima. screen (or bespoke), - constructed in 2004, - see how we recondition at [Germanplasts](https://www.youtube/watch?v=BCW07AKu-F8), Power: 110 kw, width: 1.000 mm.(40), Knives: 5 R+2S
used
Single Shaft Shredder "Obsolete" Propulsion: 37kW Hydraulics: 1.5kW Rotor diameter: approx. 400 48 rotor blades 3 stator knives Incl. segment floor