advanced search
1332 results
New in: 2011
used
Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.
used
TRIA GRANULATOR XT 100-80, (machine offered totally reconditioned - photos taken before reconditioning was completed), - Granulating chamber mm.1.040*800 (40,94*31,50”), - 110 kw drive, - New rotor, diam 620 mm (24,41”) 1.000 mm.wide (40), - N.5 Rotor knifes, - N.2 Fixed knifes, - Electrical hopper opening, - Blower and cyclone Included, - new electric panel, - rotor bearings, motor bearings replaced, - 12 mm dima. screen (or bespoke), - constructed in 2004, - see how we recondition at [Germanplasts](https://www.youtube/watch?v=BCW07AKu-F8), Power: 110 kw, width: 1.000 mm.(40), Knives: 5 R+2S
used
Single Shaft Shredder "Obsolete" Propulsion: 37kW Hydraulics: 1.5kW Rotor diameter: approx. 400 48 rotor blades 3 stator knives Incl. segment floor
New in: 2016
used
TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), type XT 9042, 900 mm wide rotor, Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, screen 12 mm., prepared for extraction through blower, control panel, constructed in 2016, the machine is offered totally reconditioned, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber, are also widely used for an immediate and safe in-line grinding of film and trims. The rotary discs integral with the roto ...
used
Nestro rotary valve separator valve, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Year of construction: approx. 2012 Motor: 4 kW Volume flow max. 28000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm. Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (LxWxH) Weight: approx. 3000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
New in: 2024
new
Electric Drum Screening Machine - Drum length 5000 mm, diameter 1800 mm - Drive with 7 kW geared motor via rollers and gear wheel - Incl. control cabinet with frequency converter - Rotational speed of the drum can be adjusted - incl. cleaning brushes New machine with CE and 1 year warranty The drum has a 20 mm square perforation. A drum with a different perforation can be ordered.
New in: 2024
new
Electric Drum Screening Machine Drum length 7000 mm, diameter 2000 mm Drive 22 kW incl. control cabinet incl. cleaning brushes Screen perforation and color according to customer requirements ROBUST CONSTRUCTION ! Optional: vibrating feed conveyor
used
(machine offered totally reconditioned - photos taken before reconditioning), TRIA PRR100 GRANULATOR, rotor width 1.000 mm., closed rotor diam.650 mm., n.5 rotating knioves, n.2 still knives, 110 kw drive, hopper mm.600 x 1.000, The machine is offered TOTALLY RECONDITIONED, NEW control panel, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)
New in: 2004
used
USED REEL SPLITTER JOVISA, Constructed in 6/2004, working width 2.600 mm, working height 1.000 mm, 50 Tons cutting force, Complete with hydraulic pack, No.2 pistons, Power 20kw, 40 A, Control panel, Good working conditions
New in: 2000
used
New in: 2005
used
Conveyor belt Hazemag Brand: Hazemag *H1= A.A length: 11,500 mm, belt width: 600 mm, drive: 1.1 kW. *H2= A.A Length: 14,800 mm, belt width: 600 mm, drive: 3 kW. *H3= A.A length: 3,500 mm, belt width: 500 mm, drive: 1.5 kW. *H4= A.A length: 12,500 mm, belt width: 500 mm, drive: 3 kW. *H5= A.A length: 10,500 mm, belt width: 500 mm, drive: 2 kW.
New in: 2010
used
Dosing conveyor belt Kleemann Brand: Kleemann A.A length = 6500 mm. Belt width: 950 mm. Propulsion: 7.5 kW planar reducer.
New in: 2000
used
Screening machine Främbs Freudenberg 20/50-2 Brand: Främbs & Freudenberg Screen area: 5000 x 2000 mm - 2 deckers Propulsion: 18.5 kW electric motor
New in: 1998
used
Eirich screening machine for fine materials Brand: Eirich Screen area: 3000 x 1600 mm – 1 decker Propulsion: 4 kW electric motor In stock: 2 pcs.
New in: 2002
used
Screening machine Främbs & Freudenberg 18/50-2.5 Brand: Främbs & Freudenberg Screen area: 5000 x 1800 mm – 2.5 deckers Propulsion: 18.5 kW electric motor In stock: 2 pcs.
New in: 1994
used
Dimensions:, Filling box:, Width: 1000mm, Height: 1000mm, Length: 2400 mm, Average filling length: 1950 mm, Press chamber, Width: 1000mm, Height: 1000mm, Length: 2700 mm, Cylinder forces, Filling pressure cylinder: 980 KN, Intermediate pressure cylinder: 1950 KN, Final pressure cylinder: 1950 KN, Hydraulic drive: 2 x 90 KW, Main drive motors: 2 pieces, Power by motor: 90 KW, Production data, Package cross-section Width: 300 mm, Height: 300mm, Number of parcels per hour approx: 100 to 140, Operating voltage: 400V/50Hz, Hydraulic tank: 3,600 l, Construction year: 1994, Width: 1000 mm, Average filling length: 1950 mm, Length: 2700 mm, Filling pressure cylinder: 980 KN, Length: 2700 mm, Intermediate pressure cylinder: 1950 KN, Final pressure cylinder: 1950 KN, Hydraulic drive: 2 x 90 KW, Main drive motors: 2 pieces, Power by motor: 90 KW, Package cross-section Width: 300 mm, Height: 300 mm, ...
used
Technical data for the bale loosening drum:Manufacturer not knownType of bale loosening drumYear of manufacture not knownDimensions of the drum 6000 x 3000 mm (l x d)Height of the welded-in helix 300 mmDimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H)Drive power 2 x 4 kWFunctional description:The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing.Scope of delivery:Bale loosening drumFrame with drive and roller bearings for the bale loosening drumComments:Documentation (operating ...
New in: 2024
new
FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 400 mm - filtering surface 1.206 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (45mm + 8mm), - Nr 1 discharge slide (under the valve), - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the various power supplies, - Machine status reporti ...
New in: 2024
new
FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 500 mm - filtering surface 1.916 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (45mm + 8mm), - Nr. 1 discharge slide (under the valve), - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the various power supplies, - Machine status report ...
New in: 2024
new
FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 700 mm - filtering surface 3.807 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (80mm + 8mm), - Nr 1 discharge slide (under the valve), - Nr. 2 hydraulic pistons for lid opening, - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the vario ...