advanced search
1359 results
New in: 2002
used
Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 112Year of construction 2002Operating hours 43,954 hours, stand MarchPress power main press 200 tonsSpecific press capacity 16,5 kg/cm²Feed channel 2,000 x 1,020 mmFilling volume 2,65 cm³Theoretic throughput rate 795 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 75 kWTying system 5-fold horizontal, full automaticThroughput rate at MSW approx. 48 up to 54 tons/h, depends on materialVolume hydraulic oil tank 3,100 lMachine weight baler approx. 50,8 tonsScope of delifery:1 piece baler MACPRESSE, type 111A1 operating manual with CE declaration, electrical and hydraulic circuit diagramComments:As can be seen in the photos, some maintenance work needs to be carried out. The seal set of the main hydraulic cylinder must be replaced. In general, the hydraulics should be cleaned and a seal replaced here and there. ...
used
Complete project for the construction of a mobile drum screening plant Complete production documents for a newly developed car-mobile drum screening plant -Complete set of drawings -Bom -Electrics must be adjusted during initial assembly -2.5 to car mobile drum screen -Capacity: from 25 cbm/h -Propulsion: Diesel generator, generator or direct external feed-in for electricity -no prototype produced yet Price is net plus VAT. Trade-in possible Further data is available on request.
New in: 2011
used
Package dimension in cm: 50 x 30 Weight: 4900 kg Dimensions ( L x W x H ): 1100 x 500 x 540 mm Propulsion: 11 KW Ground driving pressure: 65 t Control: Manual With side loading box
New in: 1996
used
For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h)Machine weight baler approx. 40 tonsSc ...
New in: 1998
used
Technical data baler:Manufacturer PresonaType LP 40 EH1 PETYear of construction 1998Operating hours 37,884 hours, data according to operating hours counter, as of MarchNo. of bales pressed 311,714 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 15 kWConnected load, total 18 kWAbsicherung min. 50 A, max. 63 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions ex ...
New in: 2003
used
Technical data baler:Manufacturer BOAType 2040.S.5V.71.37Year of manufacture 2003Operating hours approx. 35,598 hours, as of MarchPressing force main press 71 tSpecific pressing pressure 9.1 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 37 kWTying system 5-fold vertical, fully automaticThroughput rates for quality:B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on materialHydraulic oil tank capacity 800 lTransport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h)Machine weight press approx. 24 tNoise level
New in: 1995
used
Technical data baler:Manufacturer PresonaType LP 40 EH1 Year of construction 1995Operating hours 16,917 hours, data according to operating hours counter, as of MarchNo. of bales pressed 28,745 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 18,5 kWConnected load, total 26 kWAbsicherung min. 62 A, max. 100 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions exc ...
used
AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood.... The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
New in: 2005
used
Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
New in: 2005
used
Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
New in: 2007
used
Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
New in: 2003
used
Vertical baler HSM 155.2 VL, built in 2003 Specifications: Manufacturer: HSM Type: 155.2 VL Year of construction: 2003 Press force: 16 t Drive power: 4 kW Filling opening: 1100 x 590 mm Filling height: 730 mm Press box dimensions: 1100 x 700 x 1130 mm (WxDxH) Bale size: approx. 1100 x 700 x 700-1000 mm Capacity per hour: approx. 4-8 bales Theor. Idle cycle time: 24 s Dimensions: 1400 x 1200 x 2300 mm (WxDxH) Weight: 1300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
New in: 2009
used
COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.
New in: 2024
new
Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.
New in: 2021
used
total power requirement: 3,0 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,6 mSingle shaft shredder cutting system chip shredderPerformance values: Motor cutting unit 3.0 KWTemperature range 15-40 degrees CelsiusVoltage 400VPower consumption 3.0 KWLength x width x height with flat gear 1.50 mm x 575 mm x 315 mmMounted on a mobile base frameincluding mobile/tiltable bucket cartincluding documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2001
used
FOLCIERI GRANULATOR, rotor width 1.000 mm.39.37, rotor Ø 530 mm.20.87, granulating chamber 1.000 x 700 mm., n.3 rotating knives, 2 still knives (+ 3 spare sets of knives), 110 kw drive, blower, sound-proof cased, electric cabinet, constructed in 2001, offered totally reconditioned, possible supply of conveyor belt, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), installed power : 110
New in: 1995
used
Feeding chute Svedala Brand: Svedala Length 2200 mm - Width 1200 mm with two vibration motors of 1.3 kW each
New in: 2002
used
Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance
New in: 2011
used
Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic
used
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg