advanced search
1359 results
used
Dry cleaner/ friction cleaner with 110 kW drive power. Throughput approx. 1 -2.5 t/h depending on type of plastic and material thickness
New in: 2024
new
Hopper opening 400x500mm Control panel Connection 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60 Hz LxHxW 1950x1600x630 mm, Possible additions : exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5
New in: 2024
new
Hopper opening 400x500mm Control panel With thermal motor protection only available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz. Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250 – 350 kg/m³ 2,2kW 3-phase 400 V/ 50Hz 480 V/-60 LxHxW 1950x1600x630 mm, Possible additions: exit tray, tub for exit tray, Stainless Steel version, See chart below for more sizes, installed power : 2.2
New in: 2024
new
Hopper opening 400x780mm Control panel Connection: 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz 1 phase Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60Hz LxHxW 2220x1600x630 mm, possible additions: exit tray, tub for exit tray, Stainless Steel version, See the chart below for more sizes, installed power : 1.5
New in: 2024
new
Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 35-45 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 50-60 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 4,0 kW 3-phase 400 V/50 HZ480 V/60 HZ Inlet opening 400×780 mm LxHxW 2900x1600x630 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power : 4
New in: 2024
new
Hopper opening 560x1400mm Control panel with thermal motor protection only Available for 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 15 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 4200x1600x870 mm, Possible additions: removable bottom, removable nottom drawer, Steinless Steel version, See the chart below for more sizes, installed power : 15
New in: 2024
new
With combined pre-crushing and compaction of EPS material. Hopper opening: 300x490mm (11.8 x 19”). Control panel (1-phase) Connection: 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz 1 phase. Capacity. Measured with fish boxes made of 25 kg/m3 density EPS 10-15 kg/h Wet boxes (it does work with wet boxes but less efficiently than a 3-phase model) Non-corrosive Mobile on wheels Density 140-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60Hz Inlet opening 300×490 mm LxHxW 1850x1400x660 mm, Possible addition: exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5
New in: 2009
used
Mil-tek waste compactor 205TS 2445 x 745 x 545RA2168Type: 205 TSYear of manufacture: 2009Condition: functionally tested, usedoptical: traces of useHeight: 2445 mmWidth: 745 mmDepth: 545 mmPressure: 2250 kg at 8 barSafety valve: 11 barWaste bale size: 840 x 650 x 415 mmAutomatic bale ejectionOwn weight: 240 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2009Operation / joystick: JA, oben an BedienseiteOperating pressure: 8 BarLength base: 747Transport weight in kg: 240 kgHeight in mm: 2445Breite Basis: 545waste bale size: 840 x 650 x 415 mmPressing force: 2500 kg @ 8 BarFor individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your ...
New in: 2014
used
Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.
New in: 2009
used
A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute.Technical data baler:Manufacturer BOAType Impress D130.110.B.5-(5R).1.6Year of construction 2009Press power main press 127 tonsSpecific press capacity 10,7 kg/cm²Working pressure 280 barFeed channel 1.620 x 972 mm (l x w)Press volume / cycle 4,1 cbmVolume throughput without load up to 865 cbm/hourCycle time under operating conditions 22 sec.Press stroke 2.900 mmBale size 1.100 x 1.100 mm (w x h) length adjustableDriving power 2 x 55 kWConnected load 132 kWTying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm up to 17 to/hbulk weight of 50 kg/cbm up to 29 to/hbulk weight of 100 kg/cbm up to 37 to/hbulk weight of 150 kg/cbm up to 51 to/hBale weight up to 1.200 kgVolume hydraulic oil tank 1,850 LSPS contro ...
New in: 2011
used
Dosing Conveyor Belt Ammann Brand: Ammann A.A length = 1200 mm. Belt width: 650 mm. Drive: 2.2 kW slip-on gearbox Speed approx. 0.8 m/sec In stock: 6 pieces.
New in: 2015
used
Galvanized handrails for walkways Brand: Kleemann Dim.: 5000 mm length - 1240 mm height Made of square tubular profile 40x40 mm In stock: 45 pieces.
New in: 2007
used
Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK)Year of manufacture 2007Operating hours 11,970 hours, as of MarchPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control Siemens S7-200 Effective transport ...
New in: 2001
used
Metso screening machine Brand: Metso Screen area: 5300 x 2000 mm - 3 deckers Propulsion : 18.5 kW electric motor. This version is also available in 2 deckers.
New in: 1993
used
Specifications Maximum pressure: 4.6 tons Press force: 1.31 kg/cm² Bale size: 500x700x700 mm Power supply: 400 V/ 1.1 kW Year of construction: 1993
New in: 2019
used
Baler Presto CC 20 M, built in 2019, baling force 20 t, with restraint device Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 4-ply, tape, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, w ...
New in: 2008
used
Used and refurbished turbine mill from Tecnoecology for the digestion of old cables, especially fine strands or computer cables. Balling takes place at about 3,000 rpm. The tools are rotatable and have 4 usable edges. The turbine mill can be operated stand-alone or integrated into an existing system without a pellet mill. The machine has a 20 kW drive and can process up to approx. 300 kg of material per hour.
New in: 2017
used
Machine for processing mixed old cables including fine conductors and stranded cables, Due to the special rotor system and the large flywheel masses, the system is also suitable for operation in manual insertion. The machine is equipped with a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different screens.
New in: 2021
new
Small but very robust and powerful shredder for a wide range of tasks such as old cables, plastics, wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connections for connecting a cooling unit (e.g. when used for old NYM cables. The machine is and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
New in: 2024
used
The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.