Danieli Henschel CIV 600-8L DI Xpert, 700t cutting force option:, Brand: Danieli Henschel, Model: DI Xpert CIV 600-8L, Technical data:, Clearance under blade 600 mm, Chipping width 800 mm, Blade width 840 mm, Packer force 100 t, Length 5952 mm, Width of open box 2400 mm, Width of closed box 750 mm, Closed box depth 565 mm, Cylinder force on each side 2 x 130 t, Production < 60 t/h, power, Max. power John Deer Diesel 480 hp, Tank capacity 800 l, Year of construction: 2022, Operating hours 2600 h, Warranty: none, Excluded: Hydraulic oil Foundations, Electrical connections, Cranes for handling welding equipment, and welders, The machine is immediately available., fire: Daniel Henschel, model: DI Xpert CIV 600-8L, Year of construction: 2022, Warranty: none, Excluded: Hydraulic oil foundations
automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication
automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos
automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t
automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renew ...
Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of construction 2004 Hours 13265 Press force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable Setting 4-fold automatic Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale ...
NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU
Baler Austropresses, type APK E55-1400, year of manufacture 2016, with free-baling device Manufacturer: Austropressen Type: APK E-55-1400 Year of construction: 2016 Propulsion: 2 x 22 KW Press force: 55 t Filling opening: 1400 x 1020 mm (LxW) Binding: 5-fold, automatic Throughput at 35 kg/cbm: 7.5 t/h 60 kg/cbm: 13.2 t/h Bale weight: 450- 550 kg Bale dimensions: 1100 x 750 x max. 1600 mm Machine dimensions: 8850 x 2700 x 3400 mm (LxWxH) Machine weight: approx. 14,100 kg Drive 2x22kW for maximum energy efficiency. With low material loading, the machine works with only 22kW drive. Only when the filling quantity is increased is the full drive activated in order to achieve the required throughput capacity. Materials: paper, cardboard, foil, plastic, PET bottles, fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no li ...
Builder: SEKO Model: SAMURAI5 650/250 Engine: DIESEL 118 kW – 160 HP Data: L. 8.000 x W. 2.900 mm x H. 3.200 mm Hourly Production: 25 m³/h Shredding System: 2 COCHLEAS and 198 BLADES Weight: 9.500 kg
Builder: KOMPTECH Model: TOPTURN X67 Year: 2011 Operative Hours: 2.700 h Country: ITALY
Specifications Maximum pressure: 20 tons Press force: 2.6 kg/cm² Bale size: 1100 x 700 x 700 mm Bale weight: approx. 250 kg Power supply: 400V / 4kW Year of construction: 1995 Machine is fully functional, after technical supervision.
Albamat 550 V5 cardboard press with EKZ 1400 shredderRA2285Type: Albamat 500 V5 / EKZ 1400Year of manufacture: 2019Condition: usedOptical: traces of useHeight: Press: 4450 mm without housing, 5550 mm with housingWidth press: 2350 mmDepth press: 5613 mmPressure: 60t / 600 kNRecommended maximum carton size: 960 x 630 x 420 mm. Depending on the housing, longer cartons are also possibleShredder feed opening 1435 x 990 mmMotor power: 22 kW baler, 1.1 & 7.5 kW shredder.Bale size: 1050 x730 x 1200 mm (depending on filling)Cycle time: 25 s, 3.3 t/h at 35 kg/m³Dead weight: 8500 kg baler + 1000 kg shredder + feed hopperStart of baling process: PhotocellBale tying: 5 x 3.1-3.8 mm wire, fully automaticincluding:Oil cooler and oil heater for outside temperaturesFree pusherFeed belt controlPrices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Constructio ...
Impact Mill LUT Brand: LUT/Hazemag Type: LTP/1600/1800 SK Inlet opening: 1850 x 1300 mm. Propulsion: 400 kW electric motor Incl.: entrance cabinet, electric motor and hydraulic unit. Weight: about 52 tons.
Conveyor belt Hazemag Brand: Hazemag Type: HAZ *HAZ1= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. *HAZ2= A.A length: 23,000 mm, belt width: 1000 mm, drive: 18 kW. *HAZ3= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. *HAZ4= A.A length: 18,500 mm, belt width: 800 mm, drive: 5.5 kW. *HAZ5= A.A length: 14,500 mm, belt width: 1000 mm, drive: 11 kW. *HAZ6= A.A length: 15,000 mm, belt width: 800 mm, drive: 7.5 kW.
Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.
- Rotor shears type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length: approx. 2 meters - Width of the blades: 70 mm - Weight approx. 50 tons - Incl. chain belt conveyor for discharging the product
Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Brand: Akros Henschel, Model: CIC 1100-1400 14L, Technical data:, Shearing force of up to: 1100 t, Cutting width of: 1400 mm, Clamping force of up to: 350 t, Side compression force of up to: 540 t, Installed power of up to: 550kW, Output of up to: 57 tph, Year of construction: 2011, Warranty: none, Excluded: Hydraulic oil Foundations, Electrical connections, Cranes for handling welding equipment, and welders, The machine is disassembled and immediately available., fire: Akros Henschel, model: CIC 1100-1400 14L, Cutting width of: 1400 mm, Output of up to: 57 tph, Year of construction: 2011, Warranty: none, Excluded: Hydraulic oil foundations
SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...